Reviews
It's still very stable.
[How is it used?
JC92 Grom's Wheel cleaning and
I purchased this for ChainMaintenance.
There are plenty of cheaper products out there.
I was excited because if you are stingy with the price of tools that you use for a long time, you will regret it later.
Was the one you received as per Image?
It was as per Image and the packaging was very well done.
How was your experience with it?
It can be easily lifted up with one hand and does not wobble.
(It is about to go up too vigorously. w)
[Points to note]
Use a tool to lock the front brake or a thicker rubber band.
It might be better to make sure the car body doesn't move.
How did it compare to other products?
JTrip's products are a little more expensive than other products, but
Repair Parts are plentiful and well made.
If you are going to use it for a long time, I don't think you will regret your choice.
View detail
Cost performance is good.
It is more solid and secure than I expected.
The U-shaped part is deep enough to fit on the Stand Hook and prevent it from coming off, so you can use it with confidence. The color is black, so it goes well with motorcycles.
View detail
Outstanding sense of security
This is enough if you don't want to change tires. However, when loaded on the Transporter, the STAND will be at the rear of the car, so it will stick out from the car.
Therefore, the Transporter stack should be V-shaped.
View detail
I think it looks sturdy and has good cost performance.
The pipe is thicker than I expected from the picture, and it looks sturdy enough that I don't feel uneasy at all when I straddle Seat while lifting it with this.
I'm thinking of buying another set for one vehicle or so, since all I have are motorcycles that don't have center stands.
View detail
Very easy to raise and lower Motorcycle!
I bought this along with the J-TRIPV-Shaped Receptor Set 1.
Anyway, it makes raising and lowering the Motorcycle so much easier!
The cheap STAND that I used on my previous motorcycle was really hard to raise and lower.
I also damaged the Swing Arm.
I wish I'd chosen this one from the start!
View detail
If you adjust it properly, it won't bend.
Used for maintenance and winter storage of GSX1300R HAYABUSA
I've been using it for a few years now and it hasn't bent at all.
I've been straddling the heavy GSX1300R Hayabusa with the stand engaged to check the position, but there is no problem.
If you match the width of the Swing Arm to the width of the STAND and adjust it so that there is no gap, there will be no place to bend...
The feel of it.
With the V-hook, if the hook isn't on properly, it can cause you to fall over.
With the Stand for Beginner, even heavy motorcycles can be used without problems.
I also have a V receiver, but I only use it when I remove the tire.
View detail
Used on GSX-R125
This is the first time I've used a stand with a roller and it's very easy to use. View detail
Fits: HONDA MONKEY125, HONDA glom, KAWASAKI Z125, HONDA APE100, HONDA XR50, HONDA XR100, HONDA APE50, HONDA NSF100, HONDA NSR80, HONDA NSR50, HONDA MONKEY, HONDA GORILLA50, HONDA MONKEY, HONDA GROM, HONDA GROM
Necessary and sufficient construction
for Race vehicles that don't have a Side Stand, so I use it.
It's a simple one without rollers, but it's well made and the price is high.
View detail
Fits: HONDA GROM, HONDA MONKEY125, HONDA MONKEY, HONDA DAX, HONDA MSX, HONDA XRMOTARD, HONDA CHALY, HONDA APE, HONDA CT125CT110 HUNTER CUB
Perfect for the MONKEY125!
It is essential for maintenance. I'm glad it's cheap. Durability is unknown. View detail
Hard to buy, bulky, frequency of use
First of all, as a premise of Large, it is difficult to purchase OnLine anyway.
If you are a beginner, I would recommend Unit or DAYTONA products as there is a normal chance of buying the wrong one.
There's nothing in particular that makes it superior because it's a J-TRIP. I think it's almost like everyone just buys it because it's the only one they know.
There are a lot of maintenance stands overseas that are very well made, but they are all bulky, so the cost of transporting them tends to be high, and the selling price is not cheap either, which is a difficult thing for an island country.
View detail
In Maintenance
I bought it for Chain cleaning and Wheel washing!
It's a must have for Maintenance!
View detail
Safe and reliable JTrip
Because STAND-UP was necessary for Exhaust System exchange, I bought it. I bought JTrip which is considered to be first class in the general maintenance stand world for the time being.
Long Type is easy to raise and lower, so if you have enough space, we recommend this type. (When I used Short before, I was really nervous, partly because I wasn't used to it.)
The construction is solid and the Black paint is beautiful. It is a STAND that makes you look good just by putting it there.
View detail
Great Quality!
Quick discoloration of Urethane tire due to UV degradation, but no damage to Tire even after several years
If you treat the inside of the Pipe for rust, it will last a lifetime.
View detail
It's definitely a good idea to have it for Maintenance.
I bought this as a maintenance kit for my Ninja 1000 (2020).
I wasn't sure if I should choose the U-shaped receptacle or the L-shaped receptacle, so I did some research on Google and bought the L-shaped receptacle.
As a result, the L-shape worked fine on the Ninja 1000 (Dual Exhaust System until 2020).
Also, with the U-shape, the U-shaped receiver hits the Exhaust System when you lift up (look at the largeness of my friend's U-shaped receiver).
The way the thing is made and used is perfect.
You can also ride a motorcycle while lifting up and it won't freak out.
I think this is a must-have item for those who change the oil by themselves.
View detail
Maintenance essentials
I always use it during Maintenance.
I used both the V and L receptacles, but I thought the V receptacle was more stable.
It does not rust even if you wash the car as it is, and it is very easy to use.
View detail
Speaking of Green Light, JTrip
Green Light's Rear stand is only available at this Manufacturer.
I decided to do this because I don't have any.
It doesn't come with a receiver, so you'll need one separately.
The four wheels will be installed by yourself.
The product is solid and I have no concerns.
View detail
For Maintenance.
Mainly for maintenance of the chain.
Compared to the no-name product I used to use, STAND is a light force and Quantity:Can be set.
After one use, the painted area will be Wound. If you are concerned about it, it is better to cure the contact surface with the ground.
View detail
You may not need to bother with this one.
It is made by J-TRIP, so you can be assured of its quality.
It's just my feeling, but I'm not going to bother. "Stand for Beginner" I didn't think it was necessary to
I've used it and it's a pain to plug into the Axle Shaft.
Also, it was impossible to penetrate without removing the split pin to prevent the Axle from loosening.
For these reasons I decided to buy a more V-shaped Attachment.
Even so, I can set up the Motorcycle by myself, and the work efficiency (time) is short.
You can easily stand your motorcycle outdoors, or in the garage, if you keep it on the Right Side of the garage, the garage wall will support it if it should fall over to the Right.
The Bar End part of the Handlebar should only hit a little.
If you remember to turn the Handlebar to Left and lock the Brake as shown in the J-TRIP video, you should be able to get it up without too much trouble.
It depends on the weight of the motorcycle, but if the weight of the vehicle is around 200-230Kg, you should not have any physical difficulties.
If you're thinking of buying one, buy a regular Attachment first, and if you can't get it up by yourself. "I'm new at this. Part number [JT-104H] It is better to purchase the
View detail
Best friend to Vehicle Maintenance!
I bought this for the maintenance of my GPz900R.
I own other vehicles and I'm sure it will work well elsewhere.
Maintenance is much easier when the vehicle is held in a vertical position.
I've been riding motorcycles for over 10 years and I regret why I didn't purchase this product before.
There is a cheap Manufacturer's, but if you listen to the word of mouth and the opinions of the people around you, you will hear that it takes a lot of strength to raise it or that the height cannot be adjusted….
You made the right decision with J-TRIP!
View detail
First-class manufacturer's products
J-TRIP is the most famous manufacturer of STAND.
I bought the Short one because it takes up less space when I store it.
The hook is large, so you don't have to worry about it coming off. The roller is also large, so it rises lightly when you lift it.
However, if the place is not flat, it may come off, I did it once and asked my family for help and managed not to fall down.
Manufacturer's YouTube has a neat introduction on how to do it, so you can be sure to use it after watching it.
View detail