Reviews
It is easy to move your Motorcycle
Used in Z900RS
When we used to put the motorcycles in the shed, we had to switch them over and over again to get them in there But it is heavy and when I did it while being careful not to hit it, I got sweaty and my muscles ached I bought this product to see if it was possible to shift the rear wheel easily When I used it, I found that I could easily push and pull the rear wheel by Lever's principle It is now a necessity for getting the motorcycle in and out of the car
View detail
I was firmer than I thought.
Although it is an assembly type, I think that it is unsuitable for use in disassembling and storing it once assembled.
I think that it was even better if you could adjust the width and height.
It is convenient if you have it, but the lateral direction is Large, so after all you need to think about the location.
View detail
Usability is bad
If you do not put the Tire in the Center, the Tire becomes obliquely formed when you turn the Tire and you can not turn it. It is troublesome to rotate while correcting each time. Call Maintenance Stand. View detail
I was glad to purchase it easy to use.
Cost performance is good. Usability is very good although it is cheap. Tire size up to 19 inches, but there are 20 in. There was no problem either.. I do not know yet the durability, but I think it is a good product. The difficulty is that Oil did not put Roller's Bearing on herself and challenged herself. View detail
Product with price
Looks etc.. Well done.. The feeling of use comes off as the direction of the front wheel turns, so correction is bothersome. Tire rotates lightly but the deviation becomes Large and it seems to come off. Front stand is useful. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
I'm glad I bought it
Since the Center Stand was out of second hand purchase, I was thinking whether to buy a used OEMCenter Stand and use it. However, since the condition was not good, I bought this one. Exhaust System installed YOSHIMURA, it was able to install as it was without interfering. One thing I felt was using the Rubberetc. I thought it would be nice if there was a cushioning part of. As I lifted the car, I got scratched on the floor of Concrete and paint added, and STAND got scratched. You can attach it yourself (Lol) View detail
It is a good product
For the winter, because it is indoor keeping, we use it in the back of the garage during the summer, because they are both narrow spaces, we use it to move to the prescribed position.
It is satisfactory saving the trouble of turning back, it is easy to handle and convenient.
STANDCaster is not used but there is no problem. welded part - Caster - Products such as Roller Department are solid.
View detail
Very useful, but need attention
I have a Large type Motorcycle in the corner of Garage, but since the floor has a gradient, the Side Stand went up several times when pulling out, and it fell down. Do not worry about the Side Stand going up if you do it while applying force backwards. There is a big difference between the presence of Stand Mover and the absence of Stand Mover. We recommend purchasing Set. View detail
It is useful unexpectedly
It is C650 GT, but Rear is good because there is a Center Stand, but Front
When washing, I found something good with internal medicine
It is unknown whether it can be used at 120 - 70 - 15 at the inquiry stage
Although it was thing, it was easy to say
In addition I could also use MONKEY w
If it says strongly, the bottom Rubber shifted soon, but I do not mind it
It does not get in the way of it, it is better to use something quite useful
View detail
Performance highest
It helps to store Motorcycle.
I thought that I did not need much before buying, but I bought a lot of Motorcycle and purchased it because I care about how to put Motorcycle.
Easy to handle as well and it does not get in the way even after use.
I no longer worry about parking space Space.
View detail
Fits: SUZUKI GSX-R1000 K9-L1
Hang both wheels
Parallel imported.
If you buy MotorcycleTower wheels are expensive, but let's buy it.
I referred to the impression of another car model.
No instruction manual.
In the case of GSXR 1000 L 2 - L 6, Engine Holder? Is doubled so let me relieve it and let's install the adapter.
Next, loosen the plate, after the connection, totally tighten.
Also, when thinking that it is heavy to raise, should I adjust the raising width?
I adjusted it so that the front wheels will rise.
I still have my bride help me when I hang and hang it.
How does it compare with Maintenace Stand before + after?
Small storage size will probably be.
It is an advantage to be able to remove Fork and Rear arm.
View detail
Fits: YAMAHA YZ125 14.5mm, SUZUKI DRZ400 SM 11mm, SUZUKI DRZ400 S 11mm, KAWASAKI KX250F 18mm, HONDA CRF250 R 18mm, HONDA CR125 R 18mm, YAMAHA YZ250 F 01-08 14.5mm, YAMAHA YZ250 F 09-16 18mm, YAMAHA YZ250 X 99-16 14.5mm, YAMAHA YZ400 F 99-08 14.5mm, YAMAHA YZ450 F 09-16 18mm, YAMAHA YZ450 F 99-08 14.5mm, HONDA CR250 R 00-07 18mm, HONDA CRF450 R 02-16 18mm, KAWASAKI KDX200 11mm, KAWASAKI KDX250 11mm, KAWASAKI KLX250 R 11mm, KAWASAKI KLX300 R ALL MODEL 11mm, KAWASAKI KX125 03-08 18mm, KAWASAKI KX125 90-02 11mm
Strong strength
I used Triangle type STAND so far but I changed this type to T type.
Usually it will be broken if you try KICK with STAND attached
There was strength and durability enough to withstand KICK with STAND on,
Also, unlike Triangle it is Compact so people who are free running are better recommended.
View detail
Cospa best
Because there is no Center Stand, it is useful for Maintenance of Chain.
I'm going to Gap while turning it as a Lock tie, but it's a good feeling to use.
View detail
Quite useful!
It is handy, it is handy, although a little value is stretched exclusively for the car type. Here it is easy to move even in the state where Wheel and Fork are removed so it is convenient for Large change. You can also remove Rear suspension with this one unit. After Lift up Handlebar also Quantity : Pair (for Left and Right) Be free. Since it can be moved as it is in the state waiting for parts, other work can be done, Large variable efficiency. recommend. If the car model changes, you can buy Adapter less than 20,000 and you can use again. To watch out, Roller's foot has an optional Pattern. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Shim's Craft Maintenance studio
I exchanged for the outside Exhaust System and purchased it because Center Stand ceased to attach
Once the gold fixture was attached, I removed the Exhaust System, but the rest is lactin
And standing is beautiful more than anything
View detail
Fits: YAMAHA YZ125 14.5mm, SUZUKI DRZ400 SM 11mm, SUZUKI DRZ400 S 11mm, KAWASAKI KX250F 18mm, HONDA CRF250 R 18mm, HONDA CR125 R 18mm, YAMAHA YZ250 F 01-08 14.5mm, YAMAHA YZ250 F 09-16 18mm, YAMAHA YZ250 X 99-16 14.5mm, YAMAHA YZ400 F 99-08 14.5mm, YAMAHA YZ450 F 09-16 18mm, YAMAHA YZ450 F 99-08 14.5mm, HONDA CR250 R 00-07 18mm, HONDA CRF450 R 02-16 18mm, KAWASAKI KDX200 11mm, KAWASAKI KDX250 11mm, KAWASAKI KLX250 R 11mm, KAWASAKI KLX300 R ALL MODEL 11mm, KAWASAKI KX125 03-08 18mm, KAWASAKI KX125 90-02 11mm
Very easy to use Compact retrofit STAND
The Side Stand installation Bolt of KDX 200 SR became stupid and it got to fall off during running.
When I looked for something in place, I found this product, purchased.
【What made you decide the purchase?】
It was inexpensive in the carrying STAND, it seemed to be more convenient to carry with Compact than Triangle stand.
【How was it actually used?】
It is easy to install just inserting into Rear axle.
You can use it even on gravel or slightly soft soil.
【Was it difficult to install? (Hard parts case)】
Just plug it into Rear axle, but it seems likely to beat Motorcycle when it crouchs trying to plug in unfamiliar.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Be careful as it may collapse when used on a sloping ground.
During Touring I am hanging between Handlebar and Hand guard.
It is caught that the shape of the letter T is good, it will not fall unexpectedly.
[Is there anything I was disappointed about?]
None
【Hope for Manufacturer - Please let me know if you have any improvement points]
I hope we are a bit cheaper.
【Have you compared items?】
DRC : Triangle stand
I found this first, but I bought it off because it is a difficult shape to carry for Touring.
[Others]
When I could not turn on the OEM SIDES tunt I was seriously impressed with welding and replacing it, replacing it with Swingarm, but it was okay to solve it somehow.
Trouble that does not anticipate old motorcycle occurs frequently, but it is also fun.
* Can you recommend this product to friends and acquaintances? ⇒ YES! Recommendation is possible.
View detail
This is convenient
Movement in a narrow storage is impossible without this.
I was surprised to be able to easily move it.
I put a file and cleaned the corner I was interested in.
If the price goes down to 10,000 yen, I think that the evaluation can be full marks.
View detail
You can move easily.
I thought that there was also the effect of crime prevention I bought it to put 2 Motorcycle in the back of my home Garage.
I could relax and sort out on the wall easily. Although the pull needs a little hang, it does not matter if you get used to it.
Afterwards I think that the price is a little cheaper and still better.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
When removing ChainMaintenance and Rear wheel ...
I bought it because it is troublesome to remove Exhaust pipe, Silencer one by one to attach OEMCenter Stand.
The exhaust system I am using is GreenBrowntechserfu.
I thought that it would be installed without removing the Exhaust System, but I removed a part of the Exhaust pipe and the Silencer because it did not work well on the Spanner.
Installation is very easy.
As it is also in OEMCenter Stand, it will be out of the time signature that moved, so let's lock the Front brake using Rubber Band, Tie Wrap, Belt etc..
How to apply STAND is similar to OEM.
This makes working easier.
(The picture is under installation)
View detail
Speaking of easy handy
I usually use Maintenace Stand, but since I made it damaged from a slight carelessness, I tried purchasing this item I was curious as before as a connection until I repurchase.
According to the conclusion, it is like the price is suitable.
I think how to compare it with Maintenace Stand, but again it is very heavy to turn the Tire and the workability is not very good.
Also, as the other people say, the position shifts while turning the Tire, so stand up the car etc etc. We need some kind of countermeasure.
However, it does not take up space for storage and does not Lift Motorcycle, so there is almost no Risk to overturn accidentally, and Merit says that prices are cheaper than anything.
However, if it was not discounted and sold at fixed price, I think that you should buy Maintenace Stand from here ...
If you are ChainMaintenance who moves the body forward and backward, I think that it may be good to try purchasing it once.
This time, only rear. I used it for Front, but I would like to use it later.
View detail