Reviews
ONE ONE Rear Sprocket
Purchased because there were no OEM parts available for my 40 year old car. The quality is high and looks good. View detail
Just in case.
It may not be an option, but Neck is the pricey one for this kind of thing. View detail
Cosmo
The accuracy of the Sprocket is lower than that of other companies' Sprocket. (The difference between where the Chain is stretched and where it is not is large.)
However, if you take this into consideration and Chain tension the product, I think it is a good cosmetic product.
View detail
Large Satisfied
[OEM] When we tried to install the for SportsterFrontEngine Chrome Mounting Bracket, the supplied Bolt (1.25-inches) was too long and the Bolt did not fit between the Frame and EngineBody in one place. So we decided to use this 1-inch Bolt (the OEM Bolt is also 1-inch) and installed it. It was very helpful. View detail
Gamaguchi Clip
The clips are too large for motorcycles and may or may not bite, depending on the type of car. Also, I think it depends on how long the battery lasts. View detail
Weighty.
The product is quite heavy, strong and cosy. View detail
Outstanding brightness
I don't think you can go wrong with any of the Sphere Light series.
Again, I am satisfied.
View detail
จัดส่งรวดเร็วการแพ็คสินค้ามาดีมาก สินค้ามาถูกต้อง ไม่ผิดออเดอร์ ออเดอร์อะไรไป จัดส่งได้ตามที่ต้องการ และรวดเร็วอีกต่างหาก View detail
Fits: HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA Monkey Baja, HONDA MONKEY RT, HONDA MONKEY R, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MOTRA, HONDA MAGNA50, HONDA MAGNA50, HONDA CL50, HONDA BENLY50CD50, HONDA BENLY50CB90, HONDA BENLY90 S, HONDA BENLY50S, HONDA CUB PRESS, HONDA CUB PRESS, HONDA CUB PRESS
Genuine Kitaco Exhaust Gaskets for SUPER CUB 50
These gaskets were purchase due to needing an exhaust change on the Super Cub 50 and I do not like reusing the old ones if at all possible. These Kitaco ones were reviewed well and so I decided to give these a try myself. The price for the gaskets was excellent and far better than buying the OEM ones which essentially do the same job anyway. I have used a few Kitaco parts before and they really are great quality. I did have some other parts in an order and everything arrived in 5 days from being shipped. The gaskets arrived in the Kiataco packaging and were spot on. No issues or problems and the specs were perfect too. Very pleased with this purchase. View detail
Fits: KAWASAKI 1400GTR, KAWASAKI ER-6f, KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI Ninja 650, KAWASAKI Ninja ZX-14R, KAWASAKI VERSYS, KAWASAKI Z650, KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI ZZ-R1400, KAWASAKI Vulcan S, SUZUKI GSR750, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-S750, TRIUMPH Street Triple R, TRIUMPH Street Triple R-LRH, TRIUMPH Street Triple RS
kawasaki z650 plug
I am very happy to receive fast delivery of a plug that performs well. The price is also satisfactory. I am very satisfied with the fact that I trust the company's prompt processing and the price is reasonable.
The quality of the parts and bike protective clothing I had previously purchased was very good.
I plan to continue to pay attention and purchase good products.
I am happy that it is delivered quickly and without any significant shipping costs. -------------------------------------------------- -------- I am very happy to receive fast delivery of a plug that performs well. The price is also satisfactory. I am very satisfied with the fact that I trust the company's prompt processing and the price is reasonable. The quality of the parts and bike protective clothing I had previously purchased was very good. I plan to continue to pay attention and purchase good products. I am happy that it is delivered quickly and without any significant shipping costs. Powered by Google Translator
View detail
Fits: YAMAHA YZF-R25, YAMAHA MT-03, YAMAHA YZF-R3, YAMAHA MT-25
Made by Active
[How is it used?
I was looking for a decent lever because I was worried about the rattle of the Chinese lever that had been attached to my Yamaha MT-25 from the time it was delivered, and I was worried when operating the clutch.
OEM or KIJIMA products would have been fine, but I had a desire to customize it a bit, so I chose this product from the trusted ActiveBrand.
Was the one you received as per Image?
I purchased the Black color and it was exactly as pictured.
Was the installation difficult?
Since the clutch lever only needs to be replaced, it can be done in about 10 minutes with ordinary tools.
MT-25 (YZF-R25 also) requires OEM colors and washers, so confirmation is needed if changing from non-OEM.
If the OEM color is not available, it costs about 800 yen, which is high-end for just a color.
How was your experience with it?
As expected from Active, there is virtually no rattling.
I am satisfied with R's finish and the QUALITY of the product.
The play adjustment of the Clutch Wire is also infinitely adjustable, but the length of the Bolt is a bit short. (No problem in actual use in my case)
Also, the meat removal to reduce aerodynamic drag ish cool. I definitely don't feel like I can feel the impact at 250cc speeds, though! (Lol)
[Included Parts:were they on?
LeverBody only.
[Was there anything that disappointed you?
Nothing in particular!
【Review】
There is almost no rattle and the product looks good, so it is definitely better to use this one than to buy a strange Chinese Lever.
Brake levers are about twice as expensive due to their complex shape, so the Quantity:Pair (for Left and Right) If you want to have it all in one place, it will be a bit expensive.
View detail
I am glad that there is a Repair item since the item will deteriorate!
I bought for Repair because it has been ripped over time and the Rubber at the tip of the V-receptacle has been coming off every time I apply STAND.
I am glad that there is a Repair item, as these items deteriorate.
Double-sided tape makes it harder to pull out." I also put up Double-sided Tape because of the proviso that it was a good idea.
Since it is Rubber, deterioration is inevitable.
Hopefully this won't take...
View detail
I bought it by model.
The size of the part that goes into the Head did not fit and could not be worked. I will probably process it and use it in the future, but I was a little disappointed. View detail
Fits: HONDA PCX160, HONDA PCX, HONDA ADV150
Appearance and functionality
There is no rattling, the lever can be adjusted securely, and the grip, texture, and price are all good for this type of product.
If I had to say so, it would be better if it had a parking function!
There are a variety of inexpensive products on the market, but after much searching, I am glad I chose this product.
View detail
tw200
The appearance has been improved by the Large change,
The instruction manual was easy to understand and I had no trouble installing it.
View detail
Fits: SUZUKI GSX250R, SUZUKI V-Strom250, SUZUKI GSR250, SUZUKI GSR250 F, SUZUKI GSR250 S
15T might be optimal.
DL1000 V-STROM250 with Front sprocket 15T is the best for me!
14T5000rpm 65km, after changing to 15T 70km.
Reliable MADE IN SUNSTAR
View detail
Plug cap
I wanted Red but it was out of stock. View detail
Fanless LED
This LED is perfect for vehicles without the space behind the headlight, which is unique to off-road vehicles.
Almost the same size as OEMHalogen, so it can be installed without any problems.
View detail
Easy to use
Easier to use than expected. Can be turned by hand without using tools.
Since it is compact, I think it is good to take it with you when you are on an overnight touring trip. I used to have a hard time lubricating the chain, but this makes it easier. I wish I had bought it earlier.
View detail
Fits: SUZUKI VOLTY, SUZUKI ST250, SUZUKI ST250 Etype, SUZUKI Grass Tracker, SUZUKI Grass Tracker BIGBOY
light
Changed from 43 to 41
It feels like riding a different Motorcycle.
Installation can be done by yourself with some skill and tools.
I don't know how durable it will be, but if it's not too bad, I think it will be a repeat.
View detail