Reviews
perfect accessory
"The original yamaha xmax300 backrest I bought is worthy of being an original part. It has an exquisite design and can be installed without damage with a certain amount of hands-on ability. It does not require additional drilling. It can ensure the safety of passengers when driving. The appearance is also It can be perfectly matched without feeling awkward, please note that the backrest and base are sold separately. ---------------------------- ------------------------------ The Yamaha XMAX300 original back of this Yamaha XMAX300 I purchased is indeed the original component. designed. It can be installed without damage with a certain ability of hands -on. It is better to ensure the safety of passengers when driving. It can not be obtrusive in appearance in appearance. It is important to note that this back and base are sold separately. Powered by Google Translator" View detail
Gaps could be a concern.
The position is indicated on the inside of the body, and it is easy enough to turn the drill by hand.
When installed, the case does not fit snugly despite the fact that it is a dedicated product, and there is a gap between the two. I was worried about rain, but since a plastic rosette washer is inserted and screwed in place, the case should not be flooded with water.
It is a nice way to stretch your back when stopping.
View detail
Fits: YAMAHA MAJESTYS (SG28J), YAMAHA MAJESTYS (SG52J), YAMAHA MAJESTYS 4- (SG52J), YAMAHA MAJESTYS 4- (SG28J)
High quality Backrest & Pillion Bar
[How is it used?
Tandem Time
Was the one you received as per Image?
As shown in the image, the red stitches match those of the Seat, which appears to be an OEM product.
Was the installation difficult?
Easy
How was your experience with it?
good
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
View detail
It's pretty good
I don't like Style, but it was surprisingly easy.
It will be difficult to get in and out.
The installation could be done by myself by referring to Youtube from abroad.
It is uncomfortable to lean back with a lumpy spinal pad on your back.
We are seeking to do something about that.
View detail
Fits: YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA XMAX
Yamaha 50L top case backrest
Build quality is so good. Easy to install but remember to glue to the surface of the top case. 3 screws are not strenght enough to hold to the backrest surface. View detail
Fits: YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA XMAX
Designability is also fat.
The material is a rubber-like material and hard.
However, it is not so hard that it hurts to lean on it.
Installation is as simple as drilling a hole in the top case and fastening with a screw.
We have not yet tested the waterproof property of the installation, but there was no flooding with just a car wash.
View detail
Fits: HONDA Rebel 500, HONDA Rebel 500, HONDA Rebel 250, HONDA Rebel 250, HONDA Rebel300
DIY OEMHelmet holder also installed!
The installation method is described as a reminder.
If you install it yourself, you do so at your own risk.
Installation time:20 min.
Required tools:Torque wrench (10mm, 13mmSocket), 6mmHexagonal Wrench?
?Instruction Manual is not included, so you can look at it first on Net.
Temporarily assemble the backrest.
? For now, so just hand-tighten it!
?Quantity:Pair (for Left and Right) Bolt next to the Rear Fender of Quantity:Remove 2pcs (6mmHexagonal Wrench).
? It is quite stiff and can be easily removed using Glasses Wrenchetc.
?? Temporarily fasten to the car body with the supplied Bolt.
When installing the side bag support, use the bolt for the side bag support without the hanger plate.
If you want to add a hanger plate, you need to purchase Bolt separately.
Retighten the backrest bracket (13mmSocket:24N.m).
Retighten the mounting portion of the backrest (10mmSocket:10N.m).
Installation is complete so far:===========
How to install OEMHelmet holder:60-90 minutes
Neji-saurus is purchased and removed.
See Neji-saurus impresario.
Make a hole with a 6mm drill around the bottom of the upper hole on the side where the Backrest Bracket will be installed.
The size of the lens must be gradually increased from 3mm to 4mm to make it large enough.
? I only had up to 5mmDrill on hand and was forced to widen the hole.
Remove the mounting plate of the OEMHelmet holder with the Neji-saurus.
Attach the OEMHelmet holder to the back restBracket with the removed screws (security and screw reuse).
Tighten with Neji-saurus.
==============================
If side bag support is installed, the procedure may be slightly different.
The backrest is a nice touch to tighten up the silhouette!
The OEMHelmet holder could not be used when the side bag was installed, so the Backrest Bracket was modified.
If you don't want more keys and are considering DIY, please refer to this page.
View detail
Fits: HONDA Rebel 500, HONDA Rebel 500, HONDA Rebel 250, HONDA Rebel 250, HONDA Rebel300
Perfectly compatible with double seat. It does not affect the loading SPACE.
Since it is a CruiserType, we considered Backrest.
We were looking for something that was easy to purchase in terms of price and Simple construction, and decided on Endurance.
I was worried that it would interfere with the DAYTONA Grab Bar Carrier, but I was able to install it without any problems. I was worried that it might interfere with the DAYTONA Grab Bar Carrier, but I was able to install it without any problems.
I think the installation of DAYTONA's Grab Bar Carrier occupies the Bolt along with two Washers from the Rear Fender, but if you remove one Washer and install it, it will be just fine.
Fender → Backrest → Washer → Carrier.
As usual, the Rear circumference must be carefully inserted or the Screw hole may be broken, so it must be occupied slowly while temporarily holding the four screws in place.
The load area has become narrower, but it is still more than 20 cm and can carry a seat bag, etc. It seems to be able to do a one-day camping trip in Tandem.
View detail
Yamaha Sissy Bar For Yamaha Bolt R-Spec
About quality and texture - Quality is good, but the paint will show marks from things being strapped to the Sissy Bar if you are not careful. About the feeling of use - Needed if you are going to take things with you on a long ride, like a knapsack. Products to buy together - You need to also puchase the Backrest Arms to mount the Sissy Bar to. Luggage Rack is optional. Difficulty of installation - Installation is not hard. You can do it alone, but much easier if you have someone to hold the parts while you install the bolts and tighten them down. Cost performance and comparison with other products - More expensive than one from China, but fits better and is the right color. It is also a Yamaha part. About shipping and packaging - Excellent. Any concerns, cautions, or advice when purchasing - None View detail
Pad only.
I don't understand why they are only selling the Pad.
The appearance is the best match to the design of the Rebel 1100, and the texture is also excellent.
However, I can't understand why the pad is sold separately.
View detail
Low Backrest
Quantity with Pad:I am not happy that it is not a Set.
No one will install this on a single body.
It is a little shorter than the external backrest, and I chose it because I thought it would best match the style of Rebel, and I was right.
The ability to Catch the Passenger's buttocks to prevent them from falling off during acceleration is not a problem, and can also be used when strapping luggage to Rear Sets.
The texture is as OEM as you would expect, very good.
View detail
It would look better if it were there, but it is sold separately from the Sissy bar.
Sissy bar and Quantity from YamahaOEM:It is a Pad that will be Set.
The zipper allows you to take out the sponge inside, so you can do things like maintenance.
It seems to be a ManufacturerOEM, but considering the price, it seems so expensive that it is no wonder! However, considering the price, it seems to be so expensive that it is no wonder!
Bar and Quantity:It would be nice if there was a Set sale for a slightly lower price, or something.
View detail
It is just the right Size.
I like the size, which is not obtrusive, but still makes a statement.
It is not recommended, but it is convenient to hang a bit of Helmet.
I think the quality of the paint and the quality of the OEM parts is quintessential.
Since Tandem is almost never done, the appearance is determined though the Parts are attached only by Parenthesis.
But the fact that the pad is sold separately is a little bit annoying...
View detail
Tandem:To the Noh!
I had never been able to ride on a Tandem because I was afraid I would be dropped, but when I installed the Made by HURRICANE Sissy bar, the effect was extraordinary. I can now ride with peace of mind! It is easy to install and I recommend it to all Rebel riders. View detail
Back Support
About 17 years ago, I bought a Mono-lock caseE350Pearl white for my white colored Honda Big scooter and used it for about 10 years, then I bought Honda Monkey125Red about 3 years ago and installed it. I was looking for a backrest for my GIVIOEME350, and I found it at Webig and bought it. The two mounting holes were drilled on the inside of the Mono-lock case lid. I checked with a tape measure and the holes were drilled with a drill. View detail
Fits: YAMAHA VMAX 2016, YAMAHA VMAX 2015, YAMAHA VMAX 2014, YAMAHA VMAX 2013, YAMAHA VMAX 2012, YAMAHA VMAX 2011, YAMAHA VMAX 2010, YAMAHA VMAX 2009
I waited six months for it to arrive.
Cannot install due to lack of Bolt.
I'm hurting. 。 There are scratches during transportation and processing.
I was surprised at the quality of this Manufacturer product.
Side ArmRightQuantity:2pc. Set? There is only 1 pc. in the box. (Lol)
I can either scrape it off and paint it, or install it without worrying about it.
I will not purchase from Yamaha North America in the future.
View detail
Design-oriented Tandem backrest bar installation
Proper painting (Lol)
Well, the design is good, but it's expensive. (Lol)
If you have the tools, you can install it in 10 minutes?
View detail
Fits: YAMAHA V-MAX 1680, YAMAHA V-MAX 1680, YAMAHA V-MAX 1680, YAMAHA V-MAX 1680, YAMAHA V-MAX 1680, YAMAHA V-MAX 1680, YAMAHA V-MAX 1680, YAMAHA V-MAX 1680
When will it arrive?
I don't want you to Sale something that's missing. View detail
Fits: YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA YZF-R3, YAMAHA MT-07, YAMAHA YZF-R25, YAMAHA MT-03, YAMAHA XMAX
Euro Yamaha topcase back rest
I love the design of yamaha top case and prefer to have a 39 liter size instead of 50 liter. The backrest helps my pillion to rest when ever we are on the ride. View detail
It is matched to ADV150.
I'm glad that it was delivered quickly.
I haven't installed it yet, but the product looks good.
View detail