Reviews
MITSUBA Dora Recording Essentials
The REMOTE CONTROLLER installation of the MITSUBA DRA RECORDER is the only choice, and the Fit feeling is unquestionable, but the price is high. View detail
Not suitable for AIO-5Camera installation
[How is it used?
Used for AIO-5 Camera
Was the one you received as per Image?
As pictured
Was the installation difficult?
The installation itself is just a matter of removing the License Plate and inserting it.
It was used for the Camera of AIO-5, but the position width of the Bracket hole of Camera is different, so drilling is necessary to fix the Bolt.
Double-sided tape can be used for pasting, but the width is a little large and the depth is a little small.
Bolt length is not enough when using Double-sided Tape
It would be nice if it comes with a longer Bolt.
How was your experience with it?
No problem
[Included Parts:were they on?
Bolt, Nut, Washer included
[Was there anything that disappointed you?
None
View detail
Mounting and Wiring are
[How is it used?
Camera faces the front properly.
Was the one you received as per Image?
As pictured
Was the installation difficult?
Since you cannot access the Mirror Nut without removing the Meter panel, you will have to do a lot of killing, but you can do it if you follow the Installation Instruction Manual.
How was your experience with it?
No problem
[Included Parts:were they on?
Bolt for fixing Camera is included but not Nut
It was used for mounting Camera of AIO-5, but the hole of Camera was too small to be used.
[Was there anything that disappointed you?
Wiring Cord bare
Installation Point or hang
Meter panel is ScrewQuantity:I was able to remove 2pcs and pull out the rest by force and work without removing MeterWiring.
View detail
Lightweight Compact
I had been using an ordinary ram-mounted Arm, but when I transplanted it to the FairingBracket from its previous mount on the Handlebar, the length of the Arm became an obstacle to handling, and because it was heavy, the angle of the Arm sometimes changed due to vibration or shock. The length of the Arm was an obstacle to its handling.
That is why we changed to a short arm. The short arm is lighter than the short arm, and it also reduces the load on the base.
View detail
The installation was Large strange, but I am satisfied.
Because of ADV160, it takes time to detach Cowl and handle Wiring.
It took almost a day, but the images are beautiful.
The Bluetooth connection was also not bad.
If possible, we hope that it will not have to be used to verify the accident.
View detail
This is the MODEL for Motorcycle without load carrying capacity!
Mounted on ZX-10R.
Litter SS and recent Motorcycle are not loadable under Seat anyway.
The body of this model is smaller than the previous model, and it is a recommendation for Motorcycle.
Especially if ETC is installed, Exactly in 10R where there is really only a tiny gap. [Commendation also in R1].
I have been using Mistuba's DRA RECORDER for about 3 years with the previous MODEL and have not had any malfunctions.
Since a driver's camera is necessary in case of emergency, we really recommend JAPAN, which has a track record of reliability and performance, rather than inexpensive products such as those made in China.
When an accident occurs and the driver's recordings are verified. It was broken. If the "A" is not attached, there is no meaning to it at all.
In addition, if there are many malfunctions, they will need to be replaced or repaired each time, but in recent years, the labor cost for installing a driver's record is quite high at any motorcycle shop.
Therefore, although the product itself is expensive, it is safe and secure with a low failure rate and solid functions.
The only bad part is that you set it up with an app, but the connection to that app is not Smooth lol.
View detail
If there is no reason, this" is" good.
[How is it used?
About 7 years and 70,000 km
XGrip for Smartphone to attach Smartphone and DVR
Mounting points are around the handlebar
Was the one you received as per Image?
Simple package, somewhat rough product as per Image. I would like to say that it is heavy, but it is heavier than I had imagined from the fact that I had heard that it was made of aluminum and from the appearance of its small size.
Was the installation difficult?
The OEM Knob is simply loosened, inserted, and tightened.
If theft is a concern, SecurityKnob is available, but it is a bit bulky.
It is possible to use an Inch size nut to secure the Merit, which can be loosened and angled without the need for tools (use the nut for installation. (Use the Nut for installation, but do not over-tighten it.)
How was your experience with it?
Compared to the standard arm (https://www.webike.net/sd/21313050/) and long arm (https://www.webike.net/sd/21313048/), there is no Spring inside, but it has not come loose or come off.
Since it is the shortest Arm, I thought it would be the least likely to cause a sense of mess when attached around the Handlebar. The support length is also shorter, so it is somewhat safer.
The short length of the cable makes it less flexible. However, the position of Charger was originally taken into consideration, so there is no particular impact.
The lightest Arm components except for those with different materials
[Included Parts:were they on?
No particular product only.
[Was there anything that disappointed you?
Nothing special. If I had to say, it would be nice if Bolt wasmm Size, but there is no problem if you don't change it from the original parts.
Quantity:If you want to buy this product, you need to purchase it from RoseRose because the Set comes with a standard arm, but unless you need a standard or long arm for height or position reasons, I feel that this product is the one to choose if you are looking for lightness.
View detail
M’s Global Market M's GlobalMarket For Motorcycle
After purchasing new, I checked the front and rear Camera, up and down, before installation.
With the power on, about in the middle of the Monitor.
Green and Blue or Line was in there and I applied for an exchange.
The response was slow and it took about 2 weeks to get the Monitor to confirm.
Today, we checked the product and found that the LCD Panel was defective.
We will replace the Body and ship it to you.
I was contacted by the company, but the Monitor they sent me has scratches in it.
That sucks. !!!!
I bought new, didn't I?
View detail
Camera compatible with Motorcycle
It is the perfect camera for shooting motorcycle videos, as it allows you to shoot from a third-person perspective and rotate the camera in various directions for later review. The camera shakes a little when the mounting rod is extended, but even so, the images are not blurred at all, which is amazing.
The flip side of being able to take 360° video is that if you take a little bit of video, the File size can easily be 10GB or so, so that is a drawback. Also, since the Lens is convex, care must be taken to prevent wounds and fingerprints from sticking to it.
View detail
Only for car model-specific
I had a DOREMI Emblem, but when I installed the DriveRecorder, I bought this and replaced it with a PMC Emblem.
The mounting position and angle of the Emblem and Camera were also to my liking.
Quantity of Bolts required to install the Emblem and Camera in the car model Exclusive Design.:I appreciate the fact that it is a Set.
View detail
I didn't use it right.
It was attached to a steel Fuel Tank and used as a base for a Phone Holder, but when running on a day with a high of 40-Degrees, it tore from the border of the inner Gold genus. It seems that the heat softened it and it could no longer support the weight.
"Must be used indoors/inside a vehicle." I'm not complaining because I used it on an unusually hot day when it says, "I'm not complaining, but just FYI.
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Cospa is good
Smartphone Holder is using RAM Mount.
This type is the best looking and the best way to fix it without getting in the way, so I use this type for all my motorcycles.
View detail
PC application compatibility complaint
I used to use CHINA.
There were a lot of glitches.
I am replacing it with Mistuba Sankowa product.
I am satisfied with the product, but
Data import to PC application is unsatisfactory.
About half of the data recorded on the SDCard cannot be imported.
I have contacted Manufacturer, but there has been no response, so I am dissatisfied.
View detail
TimePlus is fun!
Image quality (default 58 fps) is fair
The daytime image quality Number can barely recognize all letters before and after the stop, and 4-digit numbers at the back of the second unit of Right.
When you start driving, you can recognize 4-digit numbers even in the front and back.
One point, I would like to add that there are three picture quality settings:58fps, HDR, and HDR.
1080p/58fps、1080p/29fps、HDR1080p/29fps
Motorcycle is not good for drareco
Yamaha・XG250 TRICKER
I can't compare the picture quality because it's my first driver's camera, but I felt the picture quality wasn't as good as I thought it would be.
There may be a single-cylinder effect and a problem with the location of the installation.
The app is a little unstable, but useful.
The high quality MODE of 1min1File58fps is 100MB, and the DOWNLOAD feels quicker at about 7 seconds.
I think it is easy to use (although I don't know about other apps) because it also shows map and speed during video playback and the own car Pin works.
However, when I tried to play and DL other files, the Wi-Fi connection was broken, etc. It seemed a little unstable.
The SDCard is screwed into the Plus, so it is good to be able to watch videos without the need to remove the SD card.
・TimePlus
The 1 hour and 15 minute run was combined into one video of approximately 5 minutes and 350 MB.
The video is one File per minute (default value) and the GPS on the map is only that section, but
With TimePlus, the entire driving route is displayed, making it easy to look back and enjoy looking back.
View detail
It's not compatible with my black box
Quality and Texture Information Flat Braces Easy installation of black boxes for your environment Size Chart Information License Plate Size Cost performance and comparison with other products. There are a lot of products, but the products that I thought of WeBike packaging is always great. Arrives in a week for delivery and packaging Purchasing concerns, precautions, or advice It's a shame to only give you black box fastening bolts It certainly doesn't fit other brands' black boxes, but it's definitely fair View detail
Convenient to have!
I could not find a good place to mount it, so I bought a Mirror mount because it was EXACTLY what I wanted. As a result, it was Exactly!
I was able to install it without any problems, but I am only worried about theft.
The screws are dedicated to prevent theft, but if the Bracket is broken or the Mirror is removed, it is the end of the world.
I would rather be able to take it off and on easily, so I can carry it with me.
So, I am Covering as a self defense.
View detail
Only Ball can buy it.
Only the Ball portion has become saggy.
I only bought this one because Bolt is still available.
Webike is kind enough to buy only here.
View detail
ease of use
[How is it used?
City driving and touring
Was the one you received as per Image?
Yes
How was your experience with it?
good
[Points to note]
None
How did it compare to other products?
I've never used any other Manufacturer.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Camera abnormality immediately after opening the package.
After opening the package, I connected the battery and checked the operation, but the Camera error message kept blinking and I could not record. View detail
A little processing was required.
I purchased this product to install Transcend DrivePro 20 near the handle, because the included fixture was not good enough, as it did not have angle adjustment function.
DrivePro 20 and LeFH-e 2waystyle (DriveRecorder/ActionCam) However, the result was that it could not be used as it was, and needed to be modified for use.
The DrivePro 20 has a slightly concave shape in the middle, and I felt that I could use it in the middle by shaving the protrusion on the inside of the bracket. So, I carefully shaved the inside of the bracket and the entire inside of the bracket with a router, and managed to make it usable in the middle of the bracket. Unfortunately, the Indicator Lamp was covered by the Bracket, so we drilled a 5mm hole in the top of the Bracket so that the Indicator Lamp could be seen. The bracket is now usable without any rattling, but I am a little concerned about the durability of the bracket since I had to cut the inside of the bracket.
This product is made entirely of plastic, so it is easy to process. The clasp is also made of plastic, so if you try to force the clasp to tighten by inserting an object with an incorrect diameter, the clasp is likely to break at a very high rate.
View detail