Reviews
Fits: Others iPhone 14 Pro, Others iPhone 14 Pro Max
GILD camera lens protector for iPhone 14 Pro Max
About quality and texture Great aluminum quality always from the company. About the feeling of use Actually there's different color to choose from like silver or black. But only black was sent to me without option. About Design The design is great and protective. Not like those cheap lens protectors you can buy on the market Cost performance and comparison with other products Not a cheap product for a lens protector but the quality built and it's purpose is well justified. This is my second time buying this product as I didn't fitted well the first time. The adhesive didn't stick well after I removed it to stick again. So please read the instructions carefully on how to fit it. About shipping and packaging Well packaged in a small box. Least likely to get scratched during delivery. Shipping is cheap as item is very small. Any concerns, cautions, or advice when purchasin View detail
Pre-installation impression
The Instruction Manual was not included in the package, but can be found on the product page of the official ENDURANCE website. It is recommended to check the contents before purchasing.
The product is made of steel sheet gold, so it does not have a luxurious feel, but the machining precision and the texture of the paint are good, and it does not look so cheap.
The ENDURANCE Logo is a Sticker, so you don't have to put it on if you don't need it.
Low head cap bolt for Case mounting (M6, hexagon socket) and HexalobularBolt for fixing the lid (M5) was included in the package.
Hexalobular (Torque) was supplied with a Wrench, but a 3mm Hexagonal Wrench and 10mm Spanners are required to tighten the Cap bolt.
To store the ETC in the Case, simply affix a protective sponge tape to the Case and place it inside.
Since this is a universal product, it is necessary to arrange an appropriate bracket separately for installation on the car body.
The dimensions of the holes available for installation were described in the Instruction Manual for handling.
The case does not have waterproof or dustproof features, but I think this is sufficient because it prevents direct exposure to rain in addition to the waterproof feature on the ETCBody side.
In general, it is sufficient for my needs, but I feel that the price is a bit expensive since there are many other with-key products available for a little more money.
View detail
Price is high but desire to own is satisfied
If you ignore the price, it's great.
However, the Risk of theft is now clearly higher when you are out and about etc.
5,900 yen for a mere ArmParts
Texture is the best
It also satisfies the desire for ownership.
Anyway, it's expensive.
I'm ordering from Manufacturer, but I don't mind if it's sold separately, so I can get a Screw with anti-theft measures later.
I wish they would release it.
I changed to Screw Tightening with Hexagonal Wrench
View detail
Quality is top notch
If you ignore the price, I don't think you can find a better quality ClampBase than this one.
It satisfies my desire to own one.
View detail
First SMARTDisplay
[How is it used?
Used for city driving and touring.
I use it with Apple CarPlay.
Was the one you received as per Image?
In fact, when you hold it in your hand, it is surprisingly small.
The screen size is 5-inches, which is almost the same size as X-ADV's Meter.
Was the installation difficult?
It was easy to install as it can be powered from a USB port.
Wiring from Battery is also possible.
How was your experience with it?
I am still using it only for city driving, so I wonder if it is convenient? I am not sure if it is useful or not.
Is the Navigation screen easier to see?
[Included Parts:were they on?
The Mount in Included Parts:was easy to install.
A simple instruction manual is included.
Download the PDFFile from Kijima's website for connection and use.
[Was there anything that disappointed you?
We are not yet in full operation. "Honestly, is this how it's going to be?" That's my impression.
It may be due to my usage environment, but sometimes the music gets cut off or I can't hear it.
The connection method is called Smartphone&arrarr;SMARTDisplay&arr;Income, but I can't grasp where the cause is.
I'm using IncomeB+COM SB6X, but I'm not experiencing any interruption in SMARTDisplay and Pairing, so I'm going to wait and see how it goes a bit more.
【Review】
I chose Kijima's Display considering AfterCare and FOR JAPAN MODEL certification because it is sold by JapanManufacturer, although products with the same spec. are sold at a lower price.
Price-wise, the same type of product without KijimaLogo would be considerably cheaper.
It does not have air pressure management or DreEveRecorder like other companies' products, but it may be worth buying if the display alone is sufficient for your needs.
I'm worried about my phone running out of heat in the coming season, so I'm looking forward to seeing how long I can use it.
View detail
Bracket on the bar does not fit.
The angle of the bar mounting Bracket is not correct. I was able to bend it by force, so I guess it is acceptable, but I wonder if it is such a lax thing. Or did I receive a different product? View detail
Simple.
Although 2Camera (front and rear) has become the norm for Motorcycle, we chose Front's 1CameraType.
I decided to go with 1Camera because the rear wiring is troublesome, and the 2CameraType's rear image quality is reduced, which is good for preventing agitation, but not really necessary.
Since 2Camera costs about 35,000 yen, just 1Camera is better than nothing.
I usually use an IPhone, but I couldn't connect to the app and couldn't tell if it was working or not, so I guess I made a mistake...
So I connected with Android and was able to see it (laughs).
View detail
DriveRecorder for quality
Balance between price and performance (LED signals, nighttime images, front/rear shots, angle of view, etc.).
We chose this product based on our consideration.
Durability is undecided as we have just started using it.
View detail
Very convenient
I have been using AIO-5 Lite for 6 months.
I thought I could do without it, but in my use Situation, I use CarPlay and Rear Camera quite a bit differently.
I have many Cases and purchased this one, which can be operated without taking my hand off the Handlebar.
When the Handlebar is turned all the way to the Left, the REMOTE CONTROLLERBody and the Inner of the Cowl are slightly in contact with each other.
Coped by sticking Sponge tape on the corner of the REMOTE CONTROLLER.
View detail
I only write about the dissatisfactory points! See other Reviews for the good parts!
After installing the product, I went on a touring trip of about 1100km in GW, and I will write what I think of the Negative of this product that I felt at that time.
1. Pairing interruption
Pairing with the phone was disconnected while driving and the map that was being displayed via Android auto disappeared 6 times.
Sometimes the connection was automatically restored immediately after disconnection, and sometimes it was not restored even after 30 minutes. It was a strange and time-consuming process.
I would like to tell you that I have been in trouble more than once because of course it is not possible to redo Pairing with the phone while driving.
I learned after purchasing the Monitor that other companies' Monitors use a Bluetooth 5.0 Tip, while DAYTONA uses an inexpensive Bluetooth 4.2 Tip.
That, too, is a point of dissatisfaction.
The phone is a SONY Xperia1 ii
2. No Pairing
This product has a convenient feature that, after initial Pairing, automatically searches for and connects to the previously connected phone the next time it is activated.
It does not Pairing easily. Every time.
The Instruction Manual says something like Pairing at startup and Android auto startup takes about 1 minute to avoid signal congestion.
Sometimes it takes a minute to connect, but more often it does not connect even after 5 or 10 minutes, not to mention a minute, so when touring in distant areas, I rely on Navigation and was sometimes frustrated because I could not start driving until Android auto started up.
The Instruction Manual says something about trying to connect from the phone side when it is not Pairing, but when there is an automatic connection failure, the Monitor does not respond even if the phone is operated. Even if the phone side searches, Monitor does not receive the search.
I don't know if it is device compatibility with the phone or a software issue, but I would like to see a study focusing on connectivity and a softwareUpdate.
Incidentally, this Monitor can up-date software in USBMemory if the Manufacturer publishes the up-date program.
3. Compatibility with Income from other manufacturers
I usually run with my Touring buddies while talking on Income.
When Android auto started up, Income's Microphone feature would sometimes be turned off, making it impossible to make calls.
I can't figure out the cause and restarting Monitor fixes it.
I have a beacom connected, not a DAYTONA Income, so perhaps there is something on the software side that is causing a conflict.
I don't think we have a choice about this.
Overall
So far, the product has caused more dissatisfaction than satisfaction due to the unstable connectivity with the phone.
There are many good points, such as the fact that the sound is better when connecting Monitor to Income than when connecting Income to a smartphone because it has an equalizer, and the robustness of the mount, which will never fall off. I would like to see the connectivity of this product improved through software updates.
DAYTONA, we are counting on you!
View detail
Used for Radar installation
It is necessary to remove the Mirror until the Meter is removed.
I thought it would be easy, but it was more complicated than I thought.
View detail
REMOTE CONTROLLER installed.
It is good to be able to operate it with REMOTE CONTROLLER without having to Touch the screen, although it is operated while the car is stopped. View detail
ETC Antenna BracketTYPE 3
Can be installed by co-tightening with Mirror Bracket.
Installation should be completed in 15 minutes.
The product is not very thick, so you can slightly adjust the direction of the ETCAntennas etc. by hand.
View detail
neck-mounted digital voice recorder
As a Type without Wiring, I bought it for its ease of use.
The neck is thin, so it's hard to fix it. It is lightweight, so there is no burden on the neck.
As for the images, they're pretty good. (I'm checking general and wide angle, fisheye, not yet) . The sound sounds almost like noise to me.
The operating time is short because it is a rechargeable Type, but it is possible to use it for commuting to work, etc.
View detail
I have several Helmets, so that helps.
[FreedConn For R1-PLUS I have several Helmets, so I bought the Speaker kit separately, and here is the Plate for when I run out of Income attached to the Helmet!
It's the one and only. (Lol)
View detail
With a sense of security.
If you are looking for a bar mount, this is it.
Bar mount at 1 inch This is a safe bet.
View detail
Well done.
Purchased for THRUXTONRS FE with KaEdia
The cheap ones will drop the phone, so this must be it.
The joint between the ball and the body is a little loose.
It comes out a little bit when you push it in.
It doesn't matter because I stop at Screw, but it bothers me a little.
View detail
Expect to see improvements with Up dates.
I used it for Touring about 12 hours, 200 km down the road. I think it looks good, has a good battery capacity, and fits well in the helmet. I had two mysterious power downs during the touring and the doughnut shaped ear pad was too thick to fit my ears properly and bent inside the helmet, causing pain. Once the Ear Pad was removed, the ear pad fit my ears with no problem at all, and I didn't notice much difference in sound quality. The Mesh connection is convenient once you get used to it. As others have pointed out, I was very disappointed that the power supply turned off by itself. I was worried that it would turn off at any moment because I didn't know the reason. I hope this will be improved. View detail
Limited installation methods for back camera
Wiring length of the back camera is halfway; 1m on the Camera side and 1m on the Extension Cord,
The Camera side should be about 30cm and the Extension Cord should be about 2m.
Unlike a driver's camera, the Body's mounting position is near the with handle, so the current wiring length requires a connector connection at the halfway point, making wiring difficult.
The Cable that connects to the Body also has a 4-point screw on the Body Reverse side, but this is troublesome to install.
With this structure, even if the BodyMount base can be removed with One-touch, when the Cable is inserted again,
Since the connector is fixed with a rubber band to prevent 4-point tightening, it is necessary to use a precision driver to remove the screws and insert the cable before fastening the screws, so the screws are left attached after all.
The four screws on this base are not designed to be detached, so if they are completely removed, the screws may be dropped and lost.
The back camera can only be mounted on the upper side of the base in the direction from which the camera is suspended, and cannot be flipped up and down in the body settings.
The position of the Fixing Screw between the Base and Camera is not in the Center, so changing the mounting direction of the CameraBody is necessary,
Difficult to set the adjustment angle downward because the angle of the Camera is Up.
I tried attaching it to the Fender, but it could only be adjusted slightly Up from horizontal.
View detail
Fits: KAWASAKI Ninja ZX-4R SE
M820WDController CT110 HUNTER CUB Brake folder Exactly for mounting
[How is it used?
MiVue M820WD Drareco Controller mounted in the Right SideBrake folder of the CT110 HUNTER CUB2BJ-JA55.
Although the name of the folder is Clutch folder, as shown in the product description photo, the folder can be attached to the Right Side Brake folder as well, effectively and securely.
Was the one you received as per Image?
Yes
Was the installation difficult?
It is easy. The angle of the brake lever changes when the brake folder fixing screw is loosened for installation. If you mark the current position before loosening the screw, you will not have to readjust it when assembling.
How was your experience with it?
It can be mounted securely, making it easy to work with Switch operation.
[Included Parts:were they on?
Yes. Matching mounting Bolt and collar are included and ready to install.
[Was there anything that disappointed you?
There is none. As expected.
▼ Requests
It would be easier to find a Brake folder if the name of the product listed is "Clutch holder...".
View detail