Reviews
Fits: HONDA CB400SF, HONDA CB750FC, HONDA CB900F, HONDA CBR250, HONDA CBR250, HONDA CBR250, HONDA CBX1000, HONDA MVX250, HONDA VT250F, HONDA VT250F, HONDA VT250Z, HONDA VT250Z, HONDA STEED400, HONDA VF400F, HONDA NSR250R, HONDA NSR250R, HONDA NS400R
Diversion to Honda GB500
Gasoline leakage from the Cook is expensive in GB500 because the Fuel Cock is a non-resolving Type.
Processing is required, but I appreciate that it is inexpensive and problem-free.
View detail
Used between Tank and FerCook in RENAISSA
The Lever is unexpectedly heavy, making it difficult to operate with one hand.
No fuel leaks or other problems have occurred, so it is ready for use.
View detail
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350
Purchased as a spare
I bought it as a spare and I think it will work as well as OEM since it is two-way.
The cheapest one only had one place to connect the Hose, so I went with this one!
View detail
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350
In reserve.
I think it is good that the length is adjustable! View detail
Fits: HARLEY-DAVIDSON OEMGas tanks for cars with -75:Various types of gas tanks with 3/8-NPTSize cook opening
It was nice!
For now, there are no Gasoline leaks!
I don't know how long it will last!
Feels good to use!
View detail
Fits: HONDA MONKEY, HONDA MONKEY
The direction of removal is ….
[How is it used?
SpiDer125 OEMCook is broken and is on Replace
Since it is not easy to find a cook for M12 female thread installation….
Was the one you received as per Image?
main idea
Was the installation difficult?
There is nothing difficult about it, but you need to be careful around fuel.
How was your experience with it?
Phi;8 is Overspecified for SpiDer125
[Included Parts:were they on?
Hose and Clip with I.D.Φ8, StrainerNet was included, which could not be installed as it is because the diameter of the end does not match!
[Was there anything that disappointed you?
The panelParts on the front of the Cook are not Screws but Rivet?
The SpiDerOEM is right, whereas the SpiDerOEM is left, so the Fuel Hose is a little more difficult to handle.
When the transparent hose is turned around at a steep angle, it breaks, so I use a hose with an inner diameter of Φ8 and an outer diameter of Φ8 with an inner diameter of Φ5.
View detail
Individual differences?
I don't know how it works in other vehicles.
Maybe it's an individual difference.
The lower part of the Fuel Cock interferes with the Engine.
Float the rear of the tank with Washeretc.
I installed it anyway.
Seat is now difficult to install.
Fuel Hose fitting is thinner than OEM
The original Hose is not available.
View detail
RZ250 Fuerre Hose replacement
When the RZ250's Fuel Hose routing was changed, the Hose was also replaced.
I have been using KIJIMA's Hose for some time.
The last time I replaced the hose, I used KITACO's hose because of its imechain and price, but the hose hardened unexpectedly quickly and was hard to work with when removing and reinstalling the hose.
I still value workability, so I returned to KIJIMA.
The hose is flexible and easy to work with. It is also nice that it does not harden easily.
Home center sells a similar Pink hose, but it is not similar to KIJIMA's.
I recommend KIJIMA's Hose, don't just jump on it because it is cheap.
The drawback is that it is too soft, and if the bending radius is too small or too much force is applied, the hose will bend.
Even if the motor is large and sturdy when installed, it may break due to vibration when the motorcycle is actually running, and if it does break, the fuel supply may not be able to keep up and the motor may stop without gas.
If you want to make small bends, you can use a two-layered black hose.
View detail
Buy φ5mm for APE
The one I was using deteriorated, so I replaced it.
Color Hose changes the appearance.
View detail
Fits: HONDA APE 100, HONDA APE 50, HONDA MONKEY, HONDA MONKEY, HONDA APE 100, HONDA BENLY50CD90, HONDA BENLY90 S, HONDA GORILLA, HONDA GORILLA, HONDA CUB-based Engine CL, HONDA CUB Engine CD
Fuel Cock M14
It is a product with good quality and texture information There is no difference in the feeling of use from the std products It's easy to install Cost performance and comparison with other products are cheaper than std products WeBike packaging is always great, arriving in a week for delivery and packaging Purchasing concerns, precautions, or advice The rubber packing may be damaged if tightened at too high torque. It should be tightened to meet specifications View detail
Fits: HONDA CUB-based Engine (CD), HONDA CUB-based Engine (CL), HONDA BENLY90 S, HONDA BENLY50CD90, HONDA MONKEY, HONDA APE 50, HONDA MONKEY, HONDA GORILLA, HONDA APE 100 TypeD, HONDA GORILLA, HONDA APE 100
Big Bore Carburetor (PC20)
Quality and texture information larger than std products big carbreter is definitely fuelled for its sense of use HOSELINE FOR PRODUCTS TO BUY WITH It's easy to install It provides a lot of fuel because it is larger than the cost performance and comparison with other products WeBike packaging is always great, arriving in a week for delivery and packaging When purchasing, it is recommended to make sure that the big carbreter is right for you in the items of concern, precautions, or advice. However, fuel efficiency may not be good because of too much fuel injection. The pc20/pe24 carbreter was not fuel efficient View detail
Used to replace Fuel Hose on GPZ900R.
The Hose connecting NINJA's Fuel Cock to the carburetor is hardened,
I started having trouble removing the Tank, so I replaced it.
The Fuel Hose that was originally attached was measured to be 7.5mm in inner diameter and 14mm in outer diameter.
Most of the Fuel Hose Spec. have an inner diameter of 8mm, and this product is the only one with an inner diameter of 7mm.
I was not sure, and when I checked the actual product at 0aps for the first time in a while, I found that the product Package
The GPZ900R was found in the list of compatible vehicles on the back.
I was relieved and exchanged this item for a new one.
I'm afraid there would be a lot of inconvenience if the standard and bore diameters were to change...
Yes, Hose clamp is a Quantity:2pc. Set included.
View detail
You can see the inside of the Filter.
During some carburetor adjustments, I found a piece of a very Smallest Rubber? in the Float room. I did a lot of research and couldn't find the source so I decided to put a Filter on it.
This time, I decided to use a CUB, which has a matching hose bore diameter, small size, and light weight without magnet.
Bracketetetc. is not included, so you have to prepare it by yourself. Installation itself was easy and did not affect the surrounding lines even inside the Leg shield.
If you are attaching a Filter for the first time, you should be careful not to let the protruding part of the Bracket or Tie Wrap that you are attaching hit other Lines.
The product's mechanism is an orthodox mesh system:even when the Axel is opened by the governor, Gasoline passes through normally and the Engine does not cough.
The product appearance is also well finished.
The FilterBody shows the Manufacturer's name and the direction of fuel flow. The display is not sealetc., but a raised workpiece, which is good because seal can peel off or become dirty due to engine heat.
The product was securely packaged and sealed. I think this is necessary for products related to hazardous materials.
As a buyer, this is the kind of thing that makes me happy. In the past, an import from another Manufacturer purchased at another Site was sent to us just in a Vinyl bag.
Although the cause of this installation was not found in the end, it was found that it was not foreign matter from the fuel line by installing this product. I think another merit of this product is that you can see the inside of the transparent filter and mesh type to check for foreign substances.
View detail
Good quality item
The fuel filter keeps fuel running smoothly to the engine. Changing the fuel filter keeps the injectors clean longer, which means more power and better gas mileage. Bring your car or truck to any of our stores for a fuel system cleaning to get the most power from your engine. -(high quality product) FOR PERFORMANCE USE View detail
Fits: HARLEY-DAVIDSON Universal
Millimeter but dare InchHose
When I installed an oil cooler on my XR250 using a universal type hose, I used a cloth mesh hose that I had on hand and when I installed it, the hose on the side where the OEM pipe was cut slipped out and I had a terrible time.
So I looked into using a stainless mesh hose that is close to the exhaust pipe, heat resistant, low expansion, and reasonably priced.
The Hose is pretty tight to install, but I looked at it with Idling for 30 minutes and this time it was Large sturdy.
Now we will be able to go out for a real test run.
It also fits tightly into the M8Banjo.
If you measure and buy in the length you need, you can use it without waste.
View detail
8mm petrol filter COMPLETE
Good petrol filter with fine mesh inside.bulding quality good with thicker plastic. This is 8mm outer diameter hose outer connector. View detail
Petrol filter cartridge
This is petrol filter with outer diameter 6.5mm. good quality including stanless steel filter mesh inside. Recommended View detail
L-Type is selected depending on handling conditions
The Straight Type was being used, but the hose was being loaded at the filter mounting point, and vibration caused it to crack, from which the gasoline leaked out.
Depending on the handling situation of the hose, we have to select the right shape to avoid loading.
It could cause a fire.
For my Motorcycle, this L-Type was the right choice.
The filter is fine and good.
View detail
It is made by KIJIMA, so it is better than nothing.
[How is it used?
Used for Af09.
Was the one you received as per Image?
Yes
How was your experience with it?
It is made by KIJIMA, so it is better than nothing.
[Points to note]
I would recommend checking the Φnumber of Hose before purchasing.
How did it compare to other products?
Variation is also abundant, so I thought it should be made by KIJIMA….
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Used for COLLEDA50
It has a Cup on it and you can see rust accumulating in the bottom, which is fun to see the effect. There are arrows engraved on the Body for the direction of fuel flow. the COLLEDA50 Hose has a 5mm inner diameter, but it felt just right. This Filter is disposable, so I ordered the next one. if you have Space, I recommend it because of its effective shape. View detail