Reviews
At the same time as the Fender Eliminator
I think it is the thinnest.
This will be the one that does not stand out the most.
Easy to install, just insert it into the Number.
Two 10mm Wrench will be sufficient for installation.
View detail
Fender Eliminator and Reflector installation.
From Motorcycle shop to GORILLA which has been a Fender Eliminator since purchase. I don't see a Reflector or a △Mark. I installed the Number using this kit, which is co-tightened with the NumberNut, and the Reflector is attached to the hole at the bottom of the Number to complete the installation. It was very easy. (You can also install the △Mark (sold separately) under the Reflector, but I will post my impressions of that in another post. My GORILLA has extended Swing Arm with Down Suspension, so it may interfere with Tire …. (So far it is Large sturdy.) It is a horizontal Reflector, which is fine in terms of area, but I am a little concerned about visibility. I like the fact that it looks Simple. View detail
To MONKEY125Rear.
The KITACO product is well made, and the KITACO mark is subtly placed in the middle of the reflector, which is nice. View detail
unconcernedly
I was looking for a reflector that was less assertive, and this was just what I was looking for. View detail
NiceIdeas
License Plate of Z125PRO with Small body was installed by exchanging bolt nut.
I have an OEMReflector installed now because it is a Normal fender, but I think it is necessary to stand out when the body is small.
The feeling I got when I put it on the License Plate was not very noticeable, but it was not too small and natural, and it fits in quite nicely.
Also, the angle of the OEM reflector and the License Plate are different from these Parts, so visibility is at its best.
The bolt nut for mounting is attached by inserting the spring, which is also NiceIdeas and plays a role in preventing loosening, so it can be securely attached by simply tightening it by hand.
The product design is also good because the Reflector side is resin, so it is enough to tighten it by hand, and it might be damaged by over-tightening.
I will continue to use it and use it in the future, as it is also available in Fender EliminatorSpec.
View detail
Arrival of goods
I received the product. It was exactly what I ordered with no problems. Thank you very much. View detail
Arrival of goods
I received the product. It was exactly what I ordered with no problems. Thank you very much. View detail
SMART and good.
Active Reflector is Parenthesis good.
Very SMART installation.
In case you want to use a Chatter measure, you can use the vertical Number in the T-shape.
Sponge tape is applied where it hits.
The downside is that many people wear the same thing.
View detail
Decline Rhythm in Simple
Reflector made by DAYTONA.
Used to modify a Fender Eliminator Kit on a CBR650F.
The image shows a reflector (KITACO?) that was given to us as a free gift, but in comparison, it is extended horizontally and looks stylish.
The structure is very simple and consists of a Bracket and a Reflector.
I think it would look great for use on a modern vehicle.
View detail
Since you need...
The Fender Eliminator was installed in the same way as the Fender Eliminator, so a reflector had to be installed. The thinner one seems to be better for reflecting more. I'm going to leave it as it is for a while because it is good as long as it is attached. View detail
Installed at the same time as Speedra's Fender Eliminator Kit
Speedra's Fender Eliminator Kit does not include a reflector, so I purchased this one and installed it.
The size feeling is just right.
View detail
With the conversion to rear fender-less... Part 2
At first, when we finished the inexpensive Rear fender-less conversion with Home center's Bracket, we used OEM reflector, but we replaced it with this one because it seemed to be able to refresh.
[AEBS] I had already replaced the LED Blinker Lamp Set when I posted my impression of it, but here it is again as an impression of this product.
View detail
Mounting holes are perfect.
Fender Eliminator was converted to Fender Eliminator and a Reflector was added.
It is cheaper than other companies' products and the reflector itself reflects well.
I was worried about the mounting holes because of the low price, but the Number was installed without any problems.
View detail
no problem
K-FACTORY's Fender Eliminator Kit requires a separate reflector, but the company's product was expensive, so we chose this relatively inexpensive and stylish product. We were able to install it without any problems. View detail
Not without this.
Be aware that the absence of a Reflector is a violation when installing the Fender Eliminator Kit!
Shape and rigidity seem to be fine.
View detail
unexpected
I tried to buy an integrated type that does not require a reflector bracket to reduce the burden of the Fender Eliminator, but it was 3mm thick! I found out that this one is heavier than the one I have now with the License Frame and Reflector Bracket. I don't know if it is necessary for License Frame to be this strong, but the thickness should be written in the description. View detail
For old car style Custom, you need two!
[How is it used?
I purchased Reflector to make an old car style Custom.
Was the one you received as per Image?
It is somewhat cheap, but not a problem at all.
Was the installation difficult?
Since the bracket is an external bracket, we were able to install it by using a washer and bolting on the bracket.
How was your experience with it?
I initially installed them for appearance customization, but now I can drive with peace of mind due to the increased nighttime visibility.
[Included Parts:were they on?
There is nothing else.
Washer and mounting Nut must be poised.
[Was there anything that disappointed you?
The reverse side is steel, so it is likely to have Rust, but since it is the reverse side, it is not so much of a concern since it is hidden.
Cost-effective parts for old car customization, including ▼Yon Four.
The Image looks a lot more like an old car than I expected.
View detail
It's cheap
Purchased along with Fender Eliminator.
The reflector part is also thin and looks good.
I can't complain too much because the price is low compared to others, but I wish they had at least added Cushion material.
View detail
Since only this was put on the store, it used. Although it is completely satisfactory and very much satisfied about attachment and the engine performance, a rectangle style is not pleasing somehow. For a while, I had the reflector portion made sma
Since only this was put on the store, it used.
Although it is completely satisfactory and very much satisfied about attachment and the engine performance, a rectangle style is not pleasing somehow.
For a while, I had the reflector portion made small and it has already extorted it.
It is a good point when it collects. Bad point of - Not being found I wanted you to make - reflector a little smaller.
View detail
With fender-less-izing of a motorcycle, since a reflector was needed, it purchased. He bought this product that is regarded as it attaching to a number plate since a good attachment part was not found in the body of a motorcycle, and can be small divi
With fender-less-izing of a motorcycle, since a reflector was needed, it purchased.
He bought this product that is regarded as it attaching to a number plate since a good attachment part was not found in the body of a motorcycle, and can be small divided into six.
Although 1 cmx5? of the divided parts was small, the space to stick was not located at the place as for which the number plate was vacant.
Therefore, he plans to create and attach the pedestal for sticking a reflector to a number plate by his original work.
View detail