Reviews
Great for Transporter!
I installed it on YAMAHA's YZF-R25
I've been wondering about this since I've been loading up my car with my Motorcycle and taking it to Circuit Buy a racing hook
Because it is a Single Seat, there is no Tandem Footpeg
First of all, I've used it, and it's good
It's clear
Well, I think everyone has their own way of stacking it, so I'm going to put the Tie Down Belt directly on the Frame and so on Some people will load it up by hooking it up or tie a Sub-belt to it somewhere
That's totally possible, too
However, the racing hooks make it look cooler LOL!
More than just a hook, Babyface's racing hook is a beautiful piece of modeling Yes
I bought the Black one and it's nice and tight
The feedback I got from using it is that it's easy to hook the Tie Down Belt because it's easy to apply force
Of course, you don't have to hook it up directly with the Tie Down Belt, but you can also tie it up with the Sub belt It's possible, so if you don't want to hurt them, that's fine
In my case, I bought it on the premise of loading it into Transporter, but I also bought it for those who are Touring It looks like it could be used as a luggage hook
However, the price is a little high, so if you want to put a motorcycle on the Transporter, you can do it I can highly recommend it to
View detail
Fits: HONDA CBR1000RR FIRE BLADE [Fireblade].
I don't usually run Tandem! This is recommended for those who are
The Tandem Footpeg of the SC59 is secured with a hidden Bolt from inside the Seat rail It took quite a lot of time to remove it I put the Battery under Seat in the attached Instruction Manual There is a process to remove the case in the case, but the method to remove the seat rail one by one (method on the web) I was able to install it relatively easily when I did it with the (listed on the website) View detail
If it is a bit cheaper
This is the type that is attached without Tandem Footpeg
This is the point where you can hook the Tie Down Belt when loading the vehicle
It also looks and feels like Race ish, so if you're looking for a good look, Recommends It is
View detail
If you're not going to Tandem, put this on
The place where the company's Rear Sets were installed
The difference in appearance between the Tandem Footpeg and the Tandem Footpeg was too large
Remove it and install this one
Rear Sets' Heel Guard extension
It's nice to see because it comes with this
View detail
It's a great dress-up!
Vehicle:yzf-r25 (2017)
When I purchased and installed the company's Set Back Plate, Tandem Footpeg was in the way I purchased this product because I was in the market for a
Merit
Dress-up (Tightening up around the rails.)
Elimination of Tandem Footpeg
Demerit
Fewer color variations (For those of you who are color unified.)
Since the Right Side is integrated with the exhaust bracket, this is a one-sided design The only thing that can be used is
View detail
Refreshing and nice texture
It's easy to install, just screw it up, and the DAYTONA 675 has a strap for loading There is no place to hang it, so it's convenient However, it is a bit expensive View detail
The product was exactly as I had Image
The device was installed on a 2017 MODEL S1000RR
I chose this product because of the Tandem Footpeg removal
The RearSection looks refreshed and I am satisfied with the appearance
View detail
be conspicuous
I don't specifically do Race and don't use Hook, but it helps to have it on at some point I bought it because I thought I might be able to use it to hook a seat bag hook
Because it is Aluminum Cut-out, and it is a gold color, if you put it with Small Cut-out, you can get a small size It's noticeable
It's good as an Accent even if it has no use
View detail
It looks good
I removed the Tandem Footpeg because I don't plan to ride two people, and the screw holes are bothering me I bought this one because it was a good choice
Looks Refreshing and Parenthesis is nice
View detail
Dress-up parts Purpose
After removing Tandem Footpeg
Purchased as Dress-up parts.
Part of the useful function as Hook is also useful.
It looks Simple.
In combination with another company's Helmet holder
A little ingenuity is necessary.
View detail
Be careful with one selling.
Is there such a person, who only attaches One Side?
It is unknown why it is one selling.
Anodized Treatment was weak and bald out soon.
View detail
Quantity : Pair (for Left and Right) Wondering if.
This price was for selling One Side.
Motorcycle shop used for transportation, soon became scratches.
It's functional parts, so it can not be helped.
There is no Manual, ne. Well, there is no problem with this degree, but some people may be in trouble.
View detail
Quantity : Pair (for Left and Right) Wondering if.
It was a sale of One Side.
Because it was written in the product overview, I was bad that I did not read, but this price is a bit high with just One Side.
Because I bought one more by extra shipping fee it cost twice.
Also, Hook is a little small.
I think that it is easier to use a little more Large.
Naturally, there is no installation Instruction Manual.
View detail
I regret that I can not see it
After removing Tandem Footpeg I tried to attach more than nothing. There is a helmet holder by KIJIMA so it is a waste that you can hardly see it. I should do it to the same BabyFire's Helmet holder, but it is a waste as it is a waste. View detail
Is good!
Rear Fender is now visible
Refreshed
The texture is good, I am satisfied
Through a commercially available Hook
I also use it as Helmet holder
(^ ^)
View detail
Refreshed
Attach importance of Tandem Footpeg and attach this product's Black.
Hook was as imaginary as Refreshing around Rear.
Unfortunately the color of the Bolt for installation. Although it was complaint if it unified with the color of Hook ...
I am looking for BlackBolt at Home center ...
View detail
Use RACING
As it is hard to ride a two-seater at R6, I bought it for the purpose of loading luggage after removing Tandem Footpeg, because it is important for appearance.
The installation is very easy to remove and attach.
Design that does not deteriorate the appearance of the vehicle is a good impression.
Even now as a hook hanging at the time of loading, it will not be an obstacle, so there is no problem.
Unfortunately Bolt's color is different from Hook, so Bolt stands out from behind (So ??I changed Bolt).
I worry about color fading since I used it.
The price is price only for things, at least, I was delighted if at least two out of Lineup was issued and the price was lowered even a little.
View detail
I am satisfied
Since it is not attached to the CBR 1000 RR SP as it is
(Screw mountain is not cut in Frame side)
M8Tap attached and attached with Screw.
I also used it for fixing on the car and I also used it for fixing the 70 L class TouringBack.
It is secure and secure.
View detail
I think that the quality is good
I removed Tandem Footpeg as Silencer changed, so I introduced it as a hook to fix SeatBack. I thought about Matching with Frame and made it to Black, but I wonder if Gold was also good according to footpeg.. View detail
Pretty solid
I took out the Tandem Footpeg because I changed the Exhaust System to Shan Exhaust of Pranas. I bought two to hide the hole that was originally attached. The texture seems quite luxurious and it looks tough as a puzzle. I scored Net at the time of Camping touring and ran but it was robust. Originally it was with for Right Side but I bought two and I also went to Left Side. As Helium lock is also on, Screw is about Motorcycle Screw was perfect. Screw attached does not have enough length View detail