Reviews
Custom parts that go unnoticed
Installed on Z900RS.
Trial purchase for the purpose of Blacking out.
I guess Recommendation for those who are considering Custom inexpensively.
View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
Neat product
I previously installed a K-speed bumper guard, but I didn't like it because it was a plastic injection product and was attached with a sticker.
While searching for we bikes, I found the Kijima bumper guard and installed it.
Products imported into Korea can only be installed if the license plate bracket is replaced. -------------------------------------------------- -------- I didn't like it because it was attached to K-SPEED Bumper Guard, but it was attached as a plastic injection product. While searching for Webike, I searched for Kijima Bumper Guard. Products imported in Korea can be installed only by replacing the license plate bracket. Powered by Google Translator
View detail
Fits: HONDA glom, HONDA CROSSCUB110, HONDA MONKEY125, HONDA DAX125, HONDA CT125
Good quality
It feels a bit expensive, but the quality is better than the genuine product because it is a part of CNC. Easily replaced and installed with bolt-on to the extent that no manual is required View detail
Is it difficult for some car models?
Zita's Linkage Guard cracked, so I thought I'd buy it again.
I bought this one because it was no longer available.
The product itself looks good, but it is hard to tell from the photo, but when viewed from the side, the LINK side seems to jump up a little against the mounting surface.
I was in a hurry and it was my fault for buying it without checking it carefully.
It doesn't seem to fit my Motorcycle with the LINK lower than the Skid plate.
It may be that a car model with the LINK on the top or ACERBIS skid plate would attach well.
If we reverse the LINK, the position with the LINK looks good, but the rounded shape is turned inside out, so both SIDES stick out at the bottom.
After much deliberation, we decided to attach it backwards and cut the two ends that protrude downward. I was not comfortable with roughly cutting the new one, but it would have been a waste if it did not stick.
The thing is good - but I recommend that you check the angle of the skid plate and the position of the LINK carefully before you buy it.
View detail
Fits: HONDA Rebel 250, HONDA REBEL500, HONDA Rebel 250, HONDA REBEL500
Cl500
It's thick and sturdy. I'm a little worried because it's not bolted on both sides, but I think Dejosa took care of making it strong. I was worried that it would be loose after assembling it with rubber packing inside, but the more I tightened the bolt, the better it was fixed. This is what it looks like ------------------------------------------------ ---------- It's thick and good, but it's not just a bolt fastening on both sides, but I'm worried about it. It looks Powered by Google Translator View detail
Rytech Coloring
I purchased it as an option for the frame slider to be mounted on the R-One. You can add coloring to the inside of the slider, which is great for decorating your own bike.
The price was discounted so I bought it cheaply.
I am satisfied with the product quality and that it matches well with the bike. -------------------------------------------------- -------- Purchased as an option in the frame slider to be installed in Al -One. Coloring can be put inside the slider, so it was good to decorate your own bike. The price was also discounted and I bought it cheaply. The quality of the product is also satisfactory and it goes well with the bike. Powered by Google Translator
View detail
Fits: HONDA Rebel 250, HONDA REBEL500, HONDA Rebel 250, HONDA REBEL500
Cl500
I looked into installing an engine garden. I am currently installing Ali's inexpensive frame slider, but I chose it because I thought it would not be as sturdy as a pipe engine guard in terms of design. I looked at a Japanese YouTuber's video for reference for the installation, and it fits perfectly and the frame thickness is 25mm. It's not too much ----------------------------------------------- ----------- I found it to install the engine garden. Currently, Ali's owner is equipped with a frame slider, but the design is designed to be a pipe engine guard. La does not Powered by Google Translator View detail
Cl500
It's a Daytona Eng Guard accessory. I was worried about what to do if it was soft rubber, but it wasn't soft, but it wasn't completely hard. I was curious because it seemed to be a closed tube type in the photo, but when I received it, it was open on one side. It can be installed without any additional processing. It's a perfect product. best ------------------------------------------------- --------- I was worried about what if it was a dayon or engineguard accessories, but it was a tube that was blocked in the picture. best Powered by Google Translator View detail
Fits: HONDA Rebel 250, HONDA REBEL500, HONDA Rebel 250, HONDA REBEL500
Cl500
This is a Daytona engine guard accessory. I was a little worried about its sturdiness because it was bolted on only one side, but when I received it, it was thick and sturdy and I didn't have to worry about deformation. I fixed one side on the rubber protector.
If you tighten it with 8mm bolts, it will become more and more secure without any play. I recommend it. --------------------------------- ------------------------- It's a day or engine guard accessory. It's a bit of a bolt. If you tighten it with 8mm bolts, it is recommended that the fixation will be fixed and sturdy. Powered by Google Translator
View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
Dress-up effect
The Instruction Manual says to remove the Rear Carrier, so I expected to do a lot of work, but the point is that the Hexagon Socket Bolt on the Stop Lamp should turn. If you use this rough technique, you can install the carriers by simply removing and attaching the plate. I removed only the bolt fixing the carrier and floated the rear suspension bolt on the axis at an angle.
The upper side has a long hole so that it can be adjusted so that it does not contact the Stop-lamp, but it does hit the Blinker hard enough to make an individual difference. It seems to be able to prevent a thin branch, but it seems to be not so effective as a Guard. It is a good for dress-up purpose because it becomes a robust Image.
View detail
It is attached to Slider from the beginning and looks as if it is there.
It is a foreign product, but unlike Japan's culture
Manufacturer itself is not caring.
Pooch has a per ha Gap product.
This is the culture of Europe as it is.
JAPAN's Slider is definitely better.
View detail
Fits: BMW R1200RT, BMW R1200RT, BMW R1200R, BMW R1200GS, BMW R1200GS, BMW R1200GS, BMW RnineT, BMW RnineT, BMW R1200R, BMW R1200GS Adventure, BMW R1200GS Adventure, BMW R1200GS Adventure, BMW RnineT /5, BMW RnineT Scrambler, BMW RnineT Urban G/S, BMW RnineT Pure, BMW RnineT Racer, BMW R1200S, BMW R1200ST, BMW HP2-MegaMoto
I think it's better to have it than not to have it.
Easy to install.
The only drawback is the price, which is too high even if it is for imported cars.
View detail
Reduced damage from falls in Circuit
Fitted on a VTR250, the Quantity:Pair (for Left and Right) Both fell over at Circuit and showed defensive effects.
When both of them fell down at a low-speed corner, they slid and took the car body to Gu Label, and although the footpeg and lever were damaged, the engine was able to be applied later without any problem. The slider is longer than other manufacturer's sliders (60mm is common, but this one is 70mm), which may have been good. The price is a little high, but I think the quality is acceptable.
I also appreciate the fact that only the Slider part is available through Repair Parts. The only color available is black, but I hope they will continue to make them for a long time.
View detail
There is a sense of quality
To match the color of the Motorcycle, the Shock absorber on the Slider is also Blue. View detail
Beautiful Blue.
To match the color of the motorcycle, the rings on the sliders are also blue.
I am satisfied with the beautiful Blue color.
View detail
NINJA2 Helmet50R Used with EX250L Refresh appearance
I purchased a used item with a history of use (history of falls) and installed it, but
The Damage that looks like Damage is larger than the Damage that looks like Damage, purchased at WeBig.
I was also satisfied with the responsiveness of Mr. WehBig.
Satisfied with the product.
Nothing to say.
View detail
Reliable OEM Product No.2
OEM Product should still be used for MORIWAKI.
This Size is not available at Home center.
It is a reliable OEM product
View detail
Reliable OEM Product
MORIWAKI's Skid Pad is still an OEM Product.
This size is not sold in Home center.
It is a little pricey, but it is reliable.
View detail
Opmid O2 Sensor protector is quality
The OPMID CNC O2 Sensor Guard came nicely packaged and feels soild compared to the folded metal style OEM guard, not to mention the looks! We used this Opmid guard along with the Kitaco Engine Guard - If you decide to use both you have to remove the right front engine bracket in order to prevent cosmetic damage to the new O2 sensor guard. It looks cleaner after mounting and there is no risk of damage to the outside of sensor guard. *Pictured in the review. There is only highway/city road to ride here at this location so the right bracket is not necessary for the deflection of common roadway obsticles, just remember to thread lock all of your other mounting hardware. If you plan on trail riding you can swap back to your OEM and add your engine bracket if you feel you need the exrta support for larger rock obsticles. The O2 sensor guard material appears to be a strong, thick aluminum that could withstand the life of the motorcycle. Enjoy! View detail
Indispensable
Truly beautiful piece and very well built, it replaces the ugly and insignificant original one, it also gives a touch of elegance. -------------------------------------------------- -------- Really beautiful and very well -built piece, replaces the original ugly and insignificant one. Also like a touch of elegance. Powered by Google Translator View detail