Reviews
Red is good for Motorcycle's Accent.
My local Motorcycle store only had Black, so I purchased Red and was able to install it and am happy with it. View detail
Repeater
I replaced the old one with an aging one, and I put it where it didn't belong. View detail
To Refresh!
[How is it used?
I purchased this because the Cap had become crusty and decayed over time.
The Release part of the Clutch was replaced.
How was your experience with it?
It is new, so it is soft and tight.
And with bremboLogo, the tension is increased.
How did it compare to other products?
There are other cheaper Caps and such, but if it is only a few hundred yen difference, bremboCap is the way to go!
And it is a reliable Manufacturer.
[Points to note]
I will remove it properly from now on when I bleed air.
View detail
Change it often!
It was about to be torn off due to aging, so we replaced it. I would recommend replacing it regularly every few years because it is inexpensive and anyone can replace it quickly! View detail
Cracks!
When I replaced the brake fluid, I remembered that it was cracked and decided to replace it. Although it is not something that should be replaced frequently, the area around the brake can be fatal, so if there are any cracks, it should be replaced. View detail
Fits: SUZUKI GLADIUS, HONDA XR650L, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, HONDA CTX700D, HONDA CTX700, HONDA CBR650RA, HONDA CBR900RE, HONDA CBR900RR, HONDA CBX1000, HONDA CRF230L, HONDA CRF230M, SUZUKI BURGMAN 400, SUZUKI HAYABUSA, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-14, KAWASAKI Ninja ZX-10RR, KAWASAKI Versys 1000, KAWASAKI Ninja ZX-6RR
For the price ….
I bought this because I changed the front and rear Calipers to Gold and wanted to have a consistent color.
Well, I believe it is less likely to deteriorate because of that….
Matching with GoldCaliper was a disappointment. I still think it would have been better to leave it in Black.
View detail
While CaliperRestore.
I bought it because I restored a NSR50 Brake Caliper but did not have a Cap. It can be used normally. View detail
For supplementary study
Since it is a Bleeder Cap.
It's not a place you touch often.
Every 2 or 3 years at Fluid replacement.
If it's damaged, we'll replace it.
View detail
Can also be used for four-wheeled vehicles!
The Bleeder BoltCap for the front caliper on my car (MINI JCW) was shredded, so I bought one or two to try and replace it.
The OEM was quoted a whopping Gold price of 1pc.1000 yen, so we were looking for a replacement and found that JCW's Caliper was made by brembo.
I bought the Brembo BoltCap on Webike, and it is Reasonable!
Less than half the price of MINIOEM and it comes in two. It's great! Thanks to brembo, we can use the same caps for both cars and motorcycles. So you can also use it for your 4-wheeled Brembo caliper!
I would like to see the Akebono opposed 4POT for Nissan cars learn from this.
View detail
To One point Accent.
I purchased the Yellow color.
The color is vibrant when just installed.
It fades quickly.
Let's buy another one.
View detail
Is it a coincidence?
Crack crack about 2 months after replacement.
It was so unreliable that I ordered an OEM Product to replace it.
It is not mentioned in your Impression and it happened to be a HaGap.
View detail
For Brakefor Clutch Master
The cap for the air breeder of the GALE SPEED brake master cylinder was missing, so I bought one for Brembo. The for Brembo has a ring that goes through the air breeder, so even if the cap comes off, it will not be lost. View detail
Fits: HONDA CB400SF, HONDA CB400SB, YAMAHA TMAX, YAMAHA XVS250, YAMAHA XMAX250, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VIRAGO1100, YAMAHA VMAX, YAMAHA MAJESTY250, YAMAHA SR500, YAMAHA TW 200E, YAMAHA TW 200, SUZUKI V-STROM 650, SUZUKI SV650
strong, anti-lost
I put Kijima blade breeder dust cap on my Ducati StreetFighter 1098 and Hayabusa 1300R replacement for stock cap (Hayabusa with Brembo caliper). The stock cap is easy to lose when repalce bracke fruid. View detail
Fits: HONDA CB400SF, HONDA CB400SB, YAMAHA TMAX, YAMAHA XVS250, YAMAHA XMAX250, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VIRAGO1100, YAMAHA VMAX, YAMAHA MAJESTY250, YAMAHA SR500, YAMAHA TW 200E, YAMAHA TW 200, SUZUKI V-STROM 650, SUZUKI SV650
If you feel up to it, why not give it a try?
OEM Product has deteriorated somewhat and was replaced.
It is really just a fashionable color. It has nothing to do with driving performance.
However, I think it is also important to pay attention to such details as a hobby.
View detail
(´-`). oO Looks good, but durability is disappointing.
After installing it, I was pleased with its casual Fashion feel.
However, I was disappointed that the Rubber cracked after only a few days.
I thought it might be incompatible with Fluid, so I let the Breeder dry thoroughly and put a new one on.
The result was the same. I am disappointed that the durability is very poor. I hope the quality will be improved.
View detail
Refresh
[How is it used?
I purchased Bleeder Cap because it had run away from home at some point.
The reason is that we thought it would be bad for an off-road vehicle without a cap to allow mud and water to enter the vehicle.
Was the one you received as per Image?
As per Image
Was the installation difficult?
Parts cleaner was used to clean up, and Tissue was used to make the inside of the BeautyBeauty and framed.
How was your experience with it?
It's no different than OEM.:1 set of 4pcs. can be used for 2 cars. It is good to refresh the rubber of old cars because it may be shiny and elastic.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It would be nice to have "with color" as one point.
View detail
Bleeder Cap
Crack begins to crack after about 3 weeks of wear.
Large sturdy and sturdy if you replace them because there are too many pieces.
View detail
Fits: HONDA CB400SF, HONDA CB400SB, YAMAHA TMAX, YAMAHA XVS250, YAMAHA XMAX250, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VIRAGO1100, YAMAHA VMAX, YAMAHA MAJESTY250, YAMAHA SR500, YAMAHA TW 200E, YAMAHA TW 200, SUZUKI V-STROM 650, SUZUKI SV650
useful gadgets
My motorcycle is YAMAHA NMAX155. When I changed the brake fluid last time, I broke the original air release rubber cap. I have nowhere to buy it. Until I saw this KIJIMA air release screw rubber cap on webike. It is a universal accessory, suitable for most motorcycles, and the red one looks better. -------------------------------------------------- -------- My motorcycle is YAMAHA NMAX155. When I replaced the brake oil last time, I broke the original air -to -rubber rubber and I had no place to buy it until I saw this Kijima put the air screw rubber cover. It is a universal accessory, suitable for most motorcycles, and the red ones are better. Powered by Google Translator View detail
She is a versatile girl.
After all, it's cheap! And it is also very durable.
I bought it for my Motorcycle, but it is so easy to use that I use it for my car Breeder! (Lol)
Quantity:I bought it in 1 Set of 10pcs. but I am planning to Repeat as there are only a few left! (^^)
This is good!
View detail
Fits: HONDA CB400SF, HONDA CB400SB, YAMAHA TMAX, YAMAHA XVS250, YAMAHA XMAX250, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VIRAGO1100, YAMAHA VMAX, YAMAHA MAJESTY250, YAMAHA SR500, YAMAHA TW 200E, YAMAHA TW 200, SUZUKI V-STROM 650, SUZUKI SV650
Mounted on a GSX400 X Caliper
I installed it on a GSX400 X Brake Caliper. The color of the frame and wheels of this motorcycle is vermilion, and it matches very well.
I think that although it is a Dust cap in terms of function, it looks good and has a good structure that will not be lost even if the Cap is removed.
View detail