Reviews
Fits: HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON TOURINGFamily
the expendables
I appreciate Large Change for having a wide selection of fine supplies. Large change was a big help when we ran into this shortage situation. View detail
Fits: Others , その他
Used for Caliper in FZr400 3EN1
The Caliper for the 3EN1 is a Sumitomo 32mm same diameter Piston, and the OEM is terribly expensive to replace the seal, so we used it to see if we could replace it.
Size is Exactly usable in both diameter and thickness without any problem.
It was finished for about 10,000 less.
It is only a diversion and is used at personal risk.
View detail
Fits: KAWASAKI Z1000 (air-cooled), KAWASAKI Z1000 (air-cooled)
Overhaul
I purchased this product for my z750 front caliper OH. View detail
Fits: KAWASAKI Z1000 (air-cooled), KAWASAKI Z1000 (air-cooled)
CaliperOH
I have a 78 KZ750d Brake Caliper OH. I bought this product because the OEM parts are apparently discontinued. View detail
Fits: KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000 (air-cooled), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1-R/Z1-RII
Overhaul of Caliper
I have a 78 z750d Brake Caliper OH, I was told by the OEM Parts list that it was discontinued, so I purchased the product from Other Brand Product. View detail
The enclosed Dust Seal is out of model and does not fit.
Used in Rear caliper OH of Ducati MONSTER900ie.
As per Title, Dust Seal is out of type and not available.
Oil seal can be replaced.
The Dust Seal fits Honda part number 06451-MA7-405.
View detail
Use for non-conforming Caliper
Not sure if it is cosmetic or not, but I used it to replace the oil seal on an old racing caliper.
The small O-ring and piston used in the split section could be used without modification. The leftover BridgeBolt and Dust Seal were discarded.
View detail
Fits: Others , その他
daytona 675 ABS 13〜
FBrake on daytona675 abs (Black Nisshin caliper) Used for, Quantity:4 Sets are required, but can be used without problems. View detail
Fits: その他
Used for Overhaul of Nisshin4POD
I used it for the Overhaul of Nissin4PODCaliper which I diverted to ZrX1100 (from SEA BASSGSX-R).
First of all, I really like this Nissin4PODCaliper, the OEM TOKIKO6POD is so bad that I can't compare it to the OEM TOKIKO6POD, but I think it is an excellent performance comparable to the BremboCaliper.
I really appreciate how easy it is to get the Seal kit to maintain the performance of my favorite Nisshin4POD. Now you can enjoy the excellent performance of Nisshin4POD for a while again.
View detail
OEMSeal
I use it on my Caliper which is called brembo rugby, I don't use Bolt so it's ok but I need 4 for my Caliper. If you don't want to break the seal, you can use this Caliper because it comes with grease and you can use it once every 3 years. It is better than cp2696 which is the most used in my car. View detail
Fits: Others , その他
Repair Parts and therefore Exactly
I used it for Nisshin's CaliperOverhaul.
It's Repair Parts, so it fits properly, and so far it's working without any leaks.
It's nice not to have to go to the trouble of buying an expensive OEM.
View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON TOURINGFamily
To the 883 rear caliper.
I used it on the 2003 MODEL, XL1200C SPORTSTER 1200's Rear caliper, which has stopped moving smoothly even if I rubbed it out.
The price is low and the performance is fine.
View detail
TopBrand brembo
The brembo's Caliper is already more than 35 years old, but the OEM parts supply is now available I am thankful that it is there I bought it for overhaul because the Caliper stuck to my bike for a while I didn't think that I could get it as parts, but I was told that I could buy it by webike The thing has helped me a lot View detail
The instruction manual..
I used it for the BrakeOH on my Ducati, which is about 30 years old I am thankful that I can still get it at this price However, I forgot to assemble the parts of Master Cylinder and the instruction There is no order of assembly of detailed washers in the manual and there is no solution When I have done only domestic motorcycles, and the original assembly is wrong, it is difficult In my case, I made a mistake in the installation of the stop ring of the dust cover It's good to see that the mistake was noticed at times View detail
Dimensions, mounting, etc., are fine.
There is no problem with the dimensions and installation, etc., but if the Caliper is not disassembled, the Seal on the mating surface will be left over.
The price is also higher than the OEM Parts listed below.
HONDA OEM Parts:Item Number:06451-166-405:SealSet, Piston x 2
HONDA OEM Parts:Item Number:06451-GE2-405:SealSet, Piston x 2
HONDA OEM Parts:Item Number:06451-MZ2-405:SealSet, Piston x 2
View detail
Used for BMW K1200RS earlier Rear caliper
The attached Bolt is about 5 mm long but there is no problem with fixation. O Ring of Caliper joint part is 1 pc in Kit. Although it is not included, in K1200 RS, Quantity : 2pc. Set is required. View detail
Fits: HARLEY-DAVIDSON Late 87-99 MODELUniversal
can not use.
Corresponding OEM Product number : 44045-87 : Piston seal's Piston striking face was full of Rubber's BALI, Piston Boots was unable to fit the Sizing of Caliper side to Small and Oversized and Retaining Ring. For Front's KUSTOM 1 Custom One : 0130660010 (Corresponding OEM Product No. : 44047-83, 44022-83) was able to be used, but BALI on Caliper side of PistonBoots is many and it is made complicated. It is a masterpiece of Amuro Yakuro. View detail
Used in old Crab
Dust Seal does not match the old Crab.
However, this is the only one.
Search for Ducati,
Others No problem, I can use it.
View detail
I was glad to exchange it..
【What made you decide the purchase?】
On the local shop on time to delivery, the result of the way Big arrived earlier than you ordered was the result.
【How was it actually used?】
There is no dirt like a long-term storage article on the packaging exterior itself. Also shipping packaging cleanly and firmly I entered material, and I was awfully sorry..
【Mounting was difficult?】
It was cleaned during waiting for goods arrival, with Silicon grease thin attachment, feel comfortably.
After assembly, I did a real run but no leak.
[Is there anything I was disappointed about?]
Caliper1pc. Against Quantity : Since 1 set is necessary, the price was necessary for 2 Caliper.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Current Caliper, Quantity : Because I think that 2 Set is almost, Quantity : 2 Set discount sale etc. I want to expect.
【Have you compared items?】
Nothing in particular.
View detail
[Webike Monitor] It purchased for OH of the Caliper. There is what no problem about engine performance. It is although the actual condition is that there is no choice in others and it becomes empty well. The wallet was a price which b
[Webike Monitor] It purchased for OH of the
Caliper.
There is what no problem about
engine performance.
It is although the actual condition is that there is no choice in others and it becomes empty well.
The wallet was a price which becomes lonely just for a moment.
As for two
Calipers, it is serious.
When does OH(ing) next become?
View detail