Reviews
DAYTONA products are good.
As expected from DAYTONA, it is safe to use. It is good that it turns red when the voltage drops. View detail
Voltage is not measured.
Used to locate power source
LED in Body emits light when voltage is present
It can be checked with one hand, so it's useful in tight spaces.
View detail
Compact
The numbers on the LCD are easy to read, and the body is just the right size for mounting anywhere as long as there is space. View detail
first visit to Tonichi
I have a KTC digital ratchet, but the measurement range is down to 60nm.
I've been working on the suspension and drivetrain recently.
I bought it because I thought it would be good for me to stay at Handluk Wrench forever.
Somehow I felt that Mechanical, not Digital, would be better for the Large Torque, so I chose Mechanical.
Then there is the Manufacturer, since we use KTC or Tohnichi for our main tools.
I was initially looking for KTC as Main, but Torque wrench up to 140N.m side is not available.
Digital ratchet is the only way to go. I have a 200 N.m product, but I don't need that much.
Above all, the main Site. Sold Out Notation of
Maybe a model change? If a new one comes out soon after purchase...
You're going to be disappointed!
With such concerns, I decided to look for Tohnichi, which was recommended by a friend. I decided to look for Tohnichi, which was recommended to me by a friend.
I had never heard of this Manufacturer, so I looked around for reviews and reputation.
Looks very good, doesn't it?
Lineup also has products up to 140 N.m
However, there are two types of MODELs with the same measurement range:resin handles and Gold genus Knurl.
It's hard to decide which to choose.
Gold Knurl for sites that get sticky with oil or require durability
If you are just using it occasionally as a hobby and want it to look good, you should probably choose a resin handle.
Usability is
Torque settings are displayed in Lens for both the main and sub scales, making it easy to check the setting values and easy to use.
The resin grip is also easy to hold and work with.
The feeling of the click after reaching the Torque setting is also very pleasant, isn't it?
It is reassuring to know that the Knob that locks the set Torque is made by the genus Gold.
KTC is Material:I wonder if it will be damaged over time since it is plastic. I worry about it unnecessarily, don't I?
Also note that Case is sold separately.
Case is a precision tool, so it is necessary, but 5,000 yen is a bit expensive.
A little less expensive would be nice.
View detail
Convenient
I was looking for a simple type that I can put in my Cigarette because I don't always check the voltage.
It can be used while driving, but with Daytona's Cigarette power supply with lid, the lid that is left open shakes.
LED display is Blue. It is hard to see in daylight.
Body is smooth and sturdy.
I like that it doesn't look cheap.
View detail
Fallen cannibals
This is a must-have part when purchasing a vehicle. Since the voltage can be constantly monitored, it is possible to notice battery malfunctions as soon as they occur. Also, it is easy to manage the electrical parts such as the grip heater because it is easy to see at a glance how much load is being applied to the parts. The price has gone up compared to the past, but the quality and performance are excellent, so it's a good thing. However, the wiring is incredibly long. I use it by cutting it in the middle. View detail
If you want to do your own maintenance...
I already owned SK11 Fujiwara Sangyo's digital torque wrench for 3~60Nm for Spark plug and Small size Screw, but I wanted to tighten it at 59Nm for Torque management of Axle Shaft by removing and installing Wheel, so I needed to purchase Large Range 6 I needed to purchase a 6.8~135NmDigital torque wrench.
Since the range is from 3 to 60Nm, if the value is 59Nm, the digital torque wrench that you already own would be OK, wouldn't it? However, the Torque wrench's accuracy is higher in the middle of the range, and as you go to the end of the range, the accuracy drops.
Switching from the pre-set type to the digital type requires some getting used to, as the buzzer sound and LEDMeter are used to determine when to stop.
I think the Torque numbers are correct with the inspection certificate included, so I think it is safe to use.
View detail
Simple and easy to understand!
This time, I purchased it to check the ACC power supply from the fuse box for the installation of a car's driver's record system. The LED glows red to confirm that power is being supplied. I used it for the first time, but I had no trouble with it by referring to the instructions in the Emon site.
In other people's reviews, it seems that it is often used in Motorcycle electrical tinkering, and I would like to put it in my tool box and use it.
View detail
That would be handy
It is convenient to have, and when you do vehicle maintenance by yourself, you can easily measure the battery without taking out the battery, as long as it is connected to a cord. View detail
It fulfills the functionality required for Simple.
I installed it to constantly monitor for voltage drops when electrical troubles were frequently occurring in my vehicle.
I think it is good that the small type has a simple function of displaying voltage, and also notifies the user with a red light when the voltage drops. The simple functionality makes wiring easy.
The Good
Simple and Small Type. The texture is not bad, and depending on how it is installed, it does not give the impression of being attached afterwards or complicated. It is also a good feature that it glows red when the voltage is low. It is helpful to be alerted when you need to be careful without having to check the values in detail.
[Concerned].
The Contrast of the LCD is weak and the viewing angle does not seem very wide. There is no problem when viewing from the front, but it is difficult to check the values when the Layout is viewed from an angle. In my case, I did not need to check the values while driving, but installed it in a slightly secluded place because I thought it would be good if I could check the values when the voltage dropped to the point that it glows red.
I think the printed logo is too large, which is completely a matter of taste, and the simple appearance is somewhat spoiled, so I think the balance would be better if it were a little more modest.
View detail
For BAT charge voltage monitor
I have often heard that the regulator of RC42 is fragile, and since my car has been driven for more than 10 years, I was concerned about the life of the regulator−, so I installed it to monitor its function.
BAT voltage can be checked immediately by turning BAT S/W ON, and this can also be monitored. It is also a good feature that the back light of the product in question turns red when the voltage is low.
After installation, during the operational inspection in the E/G operation state before driving, we were able to confirm that the indicated voltage of the product in question and the voltage indication of the charging voltage of the BAT section measured with the Tester were almost identical, which made us think that the voltage indication could be trusted as well.
In some cases, there was a slight difference in voltage between idling and driving.
I think it is a good piece of equipment because it can monitor the status of the BAT and the power generation system by monitoring the voltage with it. I am also very satisfied with the cost performance.
View detail
For creating Bolt holes in Gasket
[How is it used?
I bought this to drill Bolt holes for UniversalGasket.
A 6mm hole at the Bolt point of M5 is just right, and a 9mm hole that can be used as For M8 is also a Quantity.:I chose this product because it was a Set.
How was your experience with it?
It takes only a few seconds to pull out Gasket.
I felt that the teeth were in good condition and sufficient for amateur DIY Level use.
How did it compare to other products?
Single Item's or a larger number of Quantities:Set and compared before purchase.
1 pc is rather expensive and a Quantity that contains many pcs.:We chose this product because it is not used as often as the Set product.
[Points to note]
Naturally, you will need a Hammer and a hard Seat to put down when working.
【Review】
It is inexpensive, but it has served its purpose well.
With Motorcycle, it seems that 3mm will not be available, so it would have been best if 7mm had been included instead.
View detail
Air Pressure Check means Large, right?
I bought it because my old one that I had been using for more than 20 years was getting worn out and it was a necessity for me to check it frequently as I ride my motorcycle off-road. I also check my car once a week. I checked on the Net, but I chose this one sold by DAYTONA because of its cost and quality. The length of the hose is exquisite and really easy to use. The previous one was a little short and depending on the direction of the Valve, it was hard to see the Meter, so I had to turn the Tire all the way around. This time I got a good deal. It is my personal preference, but the slanted tip is easier to use, and that was the deciding factor for me to choose this one. I hope you guys will too! View detail
3rd generation
I'm not looking for any particular accuracy as long as I can see the signs of Regulator's Puncture. I'm not looking for accuracy or anything like that, except for the fact that it's 1V lower than the Large body Tester. If it breaks, I'll probably buy the same product again. I have one attached to my car and it has never broken down yet, so I think it might be a vibration or humidity problem. View detail
reliability
I had not managed Torque at all before, but I was a little worried and bought it. I feel totally at ease. I wish I had purchased it earlier. View detail
It is an essential item.
I recommend it because it is cheap and easy to voltage Check. It may be an individual difference, but the surface became sticky about 6 months after I bought it. It works fine, but when I use it, it gets sticky on my hand and is uncomfortable. View detail
I'd like to have one.
I usually do Custom and Maintenance at home, and up until now, I have been tightening by hand lux in almost all areas.
However, as I purchased and read the Service Manual for my car, I wanted to thoroughly tighten the Torque as described in various parts of the manual.
After receiving it, I re-tightened the areas that I had previously tightened by hand with the Torque wrench, and was immersed in the feeling of a tight fit, which increased my satisfaction with my purchase.
Do-it-yourself work is basically your own responsibility. That is why we want to enjoy motorcycle life safely by tightening the parts that can be done.
View detail
Precision Torque Wrench
I often need a durable torque wrench to repair and maintain motorcycles by myself. This STAHLWILLE torque wrench is an original product from Germany. The workmanship is very good. The torque range is 20-100 Nm, which is enough for me to repair motorcycles. , that is, the price is a little expensive. -------------------------------------------------- -------- It is often a durable torque wrench to maintain motorcycles by yourself. This Stahlwille torque wrench is an original German product. The workmanship is great. The torque range is 20-100 Nm. . Powered by Google Translator View detail
sufficient for one's needs
I bought this for Stem Nut and Wheel nut of my car.
The Torque wrench is a fairly inexpensive part of the Torque wrench, but it is not excessive or inadequate.
View detail
A sense of security to tighten with the stipulated Torque.
Used for the first time since purchase for Oil replacement &Clutch cover replacement today.
It is still very secure, unlike hand-look Wrench.
I had a hard time deciding between the Digital type and this one, but I bought this one because it was less expensive.
Pre-set type is a little difficult to understand how to read Memory, etc., but it is easy once you get used to it.
When it came to the regulation Torque, the unique Snap feel was easy to understand and use.
View detail