Reviews
It worked for the 3rd generation GSX1300R HAYABUSA.
I'm not sure if it's necessary to use a 14mm socket wrench or not, but I'm sure it's a good idea to use a small tool for the GSX1300R HAYABUSA in order to keep it in good condition. View detail
Fits: KAWASAKI KSR110, KAWASAKI KLX110, HONDA MONKEY, HONDA MAGNA50, HONDA DREAM50, HONDA CUB Engine (FI Vehicles), HONDA CUB series Engine (Cell starter vehicle)
FIMONKEY, Flywheel removal
I think it was easy to use. It was safe to use. View detail
Required for OH above the waist
Used for Valve matching. This is a task that is rarely done, so I am thankful for this Size. (Even this Size will probably never run out.) View detail
Fits: HONDA glom, HONDA Super Cub 50, HONDA SUPER CUB110, HONDA SUPER CUBC125, HONDA MONKEY125
I cannot believe how easy this tool made the crankshaft installation
About quality and texture - The crankshaft assembly tool from Kitaco is made from a heavy duty steel and with an oxide coated surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - I cannot believe how easy this tool made the crankshaft installation. Simple to use with basic hand tools and sustained no damage to the crankshaft or tool itself, so will able to be used again and again for the future engine builds that I have lined up. Products to buy together - A key product to purchase that will allow for removal of the crankshaft at home is a crankcase splitter tool, it is designed to pull the crankcases apart and can also be used to push the crankshaft out of the crankcase. Difficulty of installation - The installation of the crankshaft assembly tool is a simple task that took 0.5 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the crankshaft assembly tool between the crankshaft and crankcase. Cost performance and comparison with other products - I find the cost of all the products Kitaco sell to great value when compared to what most other companies sell their products for but this is not the case the crankshaft assembly tool as it is more on par but specific for the Honda Grom and not a universal tool, which is great. About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the crankshaft assembly tool, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
KITACO KITACO Spring hook
This is a must-have product for spring installation and replacement. I have personally purchased and used KITACO products for a long time, so I purchased this product this time. View detail
Required for 4EUEngine Overhaul
[How is it used?
I purchased this product to use for Engine overhaul of TZr50R.
The 4EUEngine Flywheel of TZr50R uses a special screw diameter and requires a special tool for this type of vehicle.
Was the one you received as per Image?
The product was exactly as shown in the Image and comes with the Instruction Manual, so it is ready to use as soon as it arrives.
How was your experience with it?
The quintessential product is a dedicated product and is quite easy to use.
Conversely, this is the only use for this Engine, so in a sense it is too much to handle.
To use the Fly Wheel Puller, attach the Fly Wheel Puller to the screw thread on the Crankshaft on the Flywheel side as shown in the video.
While holding it in place with the MONKEY, turn it. If it becomes very hard in the middle, you can easily loosen it by tapping it lightly with a rubber hammeretc. to give it a vibration. In my case, I pushed it through by force.
[Points to note]
Nothing special, but try not to damage Mt. Screw.
How did it compare to other products?
The competing product is the YAMAHAOEM SST, but the price is not much different, and this one is more economical since it comes with a point.
View detail
Very useful
This is a very convenient product to have when replacing Brake fluid. I think it is worth the price. View detail
You look good.
[How is it used?
XR230 Used for Valve Matching
Was the one you received as per Image?
Image
How was your experience with it?
We have completed the Valve matching process without any problems.
[Points to note]
It is a small package, but there is so much in it that you can't use it all.
No problem!
View detail
Low price but sufficient Quality
The price of Motion pro was too high, so I went with this one. The price is a quarter of the price, but the quality is solid and this product should be sufficient. The box is just a bonus, and the lid closure is so roughly made that it won't close after a few uses. View detail
Fits: BMW K1600B, BMW K1600B, BMW K1600GT, BMW K1600GT, BMW K1600GTL, BMW K1600GTL, BMW R1200GS Adventure, BMW R1200GS Adventure, BMW R1200GS Adventure, BMW C600 Sport, BMW C650GT, BMW F750GS, BMW F800GS Adventure, BMW F800R, BMW F800R, BMW F800R, BMW F850GS, BMW F850GS Adventure, BMW K1200GT, BMW K1600GT
high
KTC's Hexagon socket was half price, so I bought that.
Inch size, so it's not available in stores.
View detail
Commonly usable
It is not difficult to use and can be used normally.
In the usage situation, the handlebar is removed from the vehicle body, the handlebar is fixed in a vise, this product is installed, and the cut is performed.
It is not a tool I use often, but I think it is worth the price.
View detail
Pump without ActiveAir
It is an indispensable item when replacing brake fluid and brake hose! At first glance, it looks like just a manual pump, but if you know the principle of air removal, this is enough without buying an effective pump! If it breaks, I will repeat again! View detail
Fits: YAMAHA TZR50, HONDA BENLY50CD90, HONDA XL80, HONDA XR100, HONDA XL50, HONDA NSR50, HONDA NSR80, HONDA NS50F, HONDA NS-1, HONDA CRM80, HONDA MBX50, HONDA CRM50, HONDA CR80R/RII, YAMAHA TZM50R
Convenient to have
I bought this tool to remove the clutch lock nut on my NSR50. It is not impossible to remove the clutch lock nut without this tool, but it is safer to use this tool because the lock nut is tightened by a considerable torque. The feel of using this tool is not as accurate as the DrumstickDrumstick, so it is difficult to apply force if you do not support the tool when using it. If you have an Impact wrench, you may not have to worry about this kind of feeling. View detail
Spring in one shot.
I purchased this product for use in Silencer replacement.
Before I bought this product, I had to struggle with pliers and my fingers to finally install it, but I was able to install it in one shot.
It is a part that I am tempted to be stingy with because I don't use it often, but I think there is no harm in buying it because it makes things much easier.
View detail
Brake fluid replacement
Used for brake fluid replacement. Although it is a little expensive View detail
Quantity:Cover Honda vehicles with the OEMSpecial Tool from Set
OEMSpecial Tool so you can service it with confidence! View detail
Thank goodness for special tools
I used to work with an iron saw, but I bought a special tool. The solid handle makes it easy to work with, and prevents the outer surface from getting scratched. View detail
Fits: KTM , HUSABERG FE250-501, HUSQVARNA FC250-450, HUSQVARNA FE250-501, HUSQVARNA FX350, HUSQVARNA FX450, HUSQVARNA TC125, HUSQVARNA TC250, HUSQVARNA TE150-300, HUSQVARNA TX125, HUSQVARNA TX300, KTM 125-300XC-W, KTM 125SX, KTM 150SX, KTM 250-500EXC-F, KTM 250EXC, KTM 250SX, KTM 250SX-F, KTM 250XC, KTM 300EXC
Buy Fork Springfor Replacement
I used it on my MY22 KTM250EXC to replace the Fork Spring. It works fine, but a 24mm Spanner would be useful too. View detail
Spring Detachable
I purchased this product to use for removing and installing springs when removing and maintaining the Exhaust System.
The length is just right, no slippage or pain at the grips, and they are easy to use.
I don't use it that often, but it would be useful to have 1 pc.
View detail
Good tool if used as intended.
outer fork tube clamp has a threaded lever on the side of the clamp that closes its jaws tightly on the fork. You can even remove the threaded lever from the outer fork tube clamp, so that the fork tube clamp can be placed in the vise anywhere along its length, not just by the fork dropout. Using the outer fork tube clamp is as easy as sliding it on the fork stanchion tube, tightening the threaded lever and holding the fork vertically while loosening the fork cap or base valve. Additionally, you can lay the fork on your workbench with the long arm of the tool stopping the fork from spinning by bracing it against the bench with the tool’s long arm. The DRC/Enzo outer fork tube clamp makes that possible, easier, cheaper and safer.Good price fast delivery worked perfect.Highly recommend View detail