Reviews
Can be used without problems
This is the first Chain Tool I bought, so I can't compare it with others, but I had no problem using it.
Since the cast surface of the Gold genus is intact, it is likely to rust the next time it is used unless it is treated against rust after use.
View detail
The one and only Tool that grinds Caliper pods
I'm not sure what else Tool can do for you.
It is the one and only Tool to grind Caliper pods and you may want to have one!
I've never used the other one, so I can't compare, but it gripped the pod well and was able to grind away!
Click here for the Bad replacement procedure.
https://imp.webike.net/article/636859/
View detail
Fits: KAWASAKI KSR110, KAWASAKI KLX110, HONDA MONKEY, HONDA MAGNA50, HONDA DREAM50, HONDA CUB Engine (FI Vehicles), HONDA CUB series Engine (Cell starter vehicle)
FIMONKEY, Flywheel removal
I think it was easy to use. It was safe to use. View detail
Required for OH above the waist
Used for Valve matching. This is a task that is rarely done, so I am thankful for this Size. (Even this Size will probably never run out.) View detail
hang is there, but no problem.
Chain to Quantity:There is no problem with the functionality, although a hang is required to align the pins when setting. View detail
For CT110 HUNTER CUB
I used it to service the front brake on my new CT110 HUNTER CUB because it squeals just before stopping. I bought it because it was cheaper than others and the feeling was good. View detail
Niche tool but Large active!
True to its name, the Brake Pads Opener is a great tool for widening the gap between Brake Pads.
In our house, this one has been used from One Side 1 pot of Hara 2Scooter to 6 pots of Large type On road facing each other.
How often do you use it that often? You might think,
It is used unexpectedly frequently for assembly after cleaning the brake caliper or reinstallation of the wheel after removing it for tire replacement, etc.
In my case, I also have an off-road motorcycle, which I use for both touring and racing, and I prepare separate wheels for touring and for racing and set up tires on each wheel, and then change each wheel depending on the application.
I change the wheels for RaceWheel about 3 times a year and change them for TouringWheel when the race is over. Therefore, the Opener is a big help to me.
It's not bulky, and it's a really useful tool to have, so it's a recommendation!
View detail
Heart breaker！
First and foremost, we must note that the BALI in the cutting process is quite bad, and honestly, it is the Level that causes injury.
If it is a FOR JAPAN MODEL product, I think it is a hesitant Level to ship the product as it is.
And it is not very good as accuracy, and the Center axis is also blurred.
However, it does not mean that it cannot be used at all. If BALI is removed sesse-sese-sese and military gloves are used, it is not impossible to use it.
However, we do not anticipate that the product will be used many times, and we hope that you will consider it as a disposable level for this time.
Personally, I would urge everyone to choose a more solid product when considering it as a tool.
well ♪ Hyakkety-yak ♪ It is possible for people who understand the concept of "Level" to purchase the product.
View detail
Fits: HONDA glom, HONDA Super Cub 50, HONDA SUPER CUB110, HONDA SUPER CUBC125, HONDA MONKEY125
I cannot believe how easy this tool made the crankshaft installation
About quality and texture - The crankshaft assembly tool from Kitaco is made from a heavy duty steel and with an oxide coated surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - I cannot believe how easy this tool made the crankshaft installation. Simple to use with basic hand tools and sustained no damage to the crankshaft or tool itself, so will able to be used again and again for the future engine builds that I have lined up. Products to buy together - A key product to purchase that will allow for removal of the crankshaft at home is a crankcase splitter tool, it is designed to pull the crankcases apart and can also be used to push the crankshaft out of the crankcase. Difficulty of installation - The installation of the crankshaft assembly tool is a simple task that took 0.5 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the crankshaft assembly tool between the crankshaft and crankcase. Cost performance and comparison with other products - I find the cost of all the products Kitaco sell to great value when compared to what most other companies sell their products for but this is not the case the crankshaft assembly tool as it is more on par but specific for the Honda Grom and not a universal tool, which is great. About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the crankshaft assembly tool, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Chain brush
I continue to use it because it is easy to use and inexpensive. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
good
I think it is worth buying because it can be used for various types of cars!
It would be nice to have one, especially for a 4MINI, as it will be used more often!
View detail
KITACO KITACO Spring hook
This is a must-have product for spring installation and replacement. I have personally purchased and used KITACO products for a long time, so I purchased this product this time. View detail
Cheap, but not easy to use.
[How is it used?
Used for Engine O/H of TZr50R.
In particular, a universal holder like this product is needed to remove the fixed nut of the Clutch.
Was the one you received as per Image?
We selected this product because it had the lowest Gold amount.
To be honest, I thought the cheap price would make the product quite poor, but it was not as bad as I expected.
The supplier may be the same as the ones offered by other Manufacturers because the pictures are the same.
How was your experience with it?
The ease of use is not all that great.
In the case of TZr, the fixed pin is hooked to the clutch housing, but the fixed pin is short and easily comes off,
I cannot apply force well. I have the impression that the size is not right for 4EUEngine, although it may be just the right size for other Scooters.
[Points to note]
Be careful not to put the fixed Pin in the wrong place.
I used it on two engines and accidentally put a pin on the bolt hole of the clutch, destroying the bolt hole.
How did it compare to other products?
Similar products are lined up at similar Gold prices, as if the suppliers are the same.
Once you buy one, it will last a lifetime, so you might as well get something a little more decent.
View detail
Required for 4EUEngine Overhaul
[How is it used?
I purchased this product to use for Engine overhaul of TZr50R.
The 4EUEngine Flywheel of TZr50R uses a special screw diameter and requires a special tool for this type of vehicle.
Was the one you received as per Image?
The product was exactly as shown in the Image and comes with the Instruction Manual, so it is ready to use as soon as it arrives.
How was your experience with it?
The quintessential product is a dedicated product and is quite easy to use.
Conversely, this is the only use for this Engine, so in a sense it is too much to handle.
To use the Fly Wheel Puller, attach the Fly Wheel Puller to the screw thread on the Crankshaft on the Flywheel side as shown in the video.
While holding it in place with the MONKEY, turn it. If it becomes very hard in the middle, you can easily loosen it by tapping it lightly with a rubber hammeretc. to give it a vibration. In my case, I pushed it through by force.
[Points to note]
Nothing special, but try not to damage Mt. Screw.
How did it compare to other products?
The competing product is the YAMAHAOEM SST, but the price is not much different, and this one is more economical since it comes with a point.
View detail
Very useful
This is a very convenient product to have when replacing Brake fluid. I think it is worth the price. View detail
Priced right and no damage to the adjuster.
Is a great tool to adjust the rear shock compared to using a screw driver and a hammer.It would have been extremely difficult and time consuming to preload springs without this tool.Recommend getting one to add to your collection.very handy tool, very good price.add;fits with exhaust clamps,triple tree nuts of old 50-250cc motorcycles View detail
Maintenance of Chain, which I am not good at, could be easier.
I've only done simple cleaning when I sprayed oil in the past, so I think I can do it a little better from now on. View detail
Requires some getting used to.
Too thin and spoiled in Bell Hammer's Nozzle.
Is it for a little thicker Nozzles like CRC?
Or is it compatibility with the car model? (Used on deRaster400 and GSR250)
We used it twice and returned to the old method of working with the Vinyl bag to stop and pour.
It also takes quite a while for the lubricant to travel through the Hose and come out from below.
The price is something I would be willing to keep for a trial, so I think it is a good idea to buy one to try it out.
It has been on the market for a long time, so I am sure it is useful for people who are used to it.
View detail
You look good.
[How is it used?
XR230 Used for Valve Matching
Was the one you received as per Image?
Image
How was your experience with it?
We have completed the Valve matching process without any problems.
[Points to note]
It is a small package, but there is so much in it that you can't use it all.
No problem!
View detail
Low price but sufficient Quality
The price of Motion pro was too high, so I went with this one. The price is a quarter of the price, but the quality is solid and this product should be sufficient. The box is just a bonus, and the lid closure is so roughly made that it won't close after a few uses. View detail