Reviews
Tightened with a slotted screwdriver.
Used to replace an oil line. It seemed to be able to close it with a hexagon, but it didn't fit slightly. I think it is a millimeter. View detail
Niche tool but Large active!
True to its name, the Brake Pads Opener is a great tool for widening the gap between Brake Pads.
In our house, this one has been used from One Side 1 pot of Hara 2Scooter to 6 pots of Large type On road facing each other.
How often do you use it that often? You might think,
It is used unexpectedly frequently for assembly after cleaning the brake caliper or reinstallation of the wheel after removing it for tire replacement, etc.
In my case, I also have an off-road motorcycle, which I use for both touring and racing, and I prepare separate wheels for touring and for racing and set up tires on each wheel, and then change each wheel depending on the application.
I change the wheels for RaceWheel about 3 times a year and change them for TouringWheel when the race is over. Therefore, the Opener is a big help to me.
It's not bulky, and it's a really useful tool to have, so it's a recommendation!
View detail
Tools used only occasionally are SK11
I use basic KTC and Tone for tools.
I use SK11 for tools that are used only occasionally.
Insert angle of this Deep socket:6.35mm (1/4Inch) Purchase
Sprocket Coveretc.It is necessary to remove the bolt that is deep in the bolt, and it is necessary to remove the bolt that is deep in the bolt.
Frequently used insertion angle:9.5mm (3/8Inch) Deep socket in the
If you try to use the 8mm, the Ratchet Pouch opening will be
It's thicker, so it hits the Cover.
So, insertion angle:6.35mm (1/4Inch) will be needed
But I don't use KTCetc. so I don't want to buy KTCetc. for my Wallet...
Thank goodness for SK11's Socket
Reliable quality at a reasonable price
I use KTC and Tone where I hang Large Torque.
The parts of SmallTorque that are not used much are supplemented with SK11.
View detail
a little expensive
10mm on brembo OEMHose, works well.
I like the fact that there are many Size options.
It is more expensive, but Individual Youth offers Quantity:2pc. Set is enough, so Quantity is wasted.:Better than paying high Gold amount for 1 Set of 10pcs.etc.
However, I think there are cases of multiple Wiring, so 4 to Quantity:Variation of 1 Set of 6pcs. is also desired.
View detail
easy to use
Easy to use
Daido has Daido, you can trust him.
View detail
Switching from Digital torque wrench
[How is it used?
I have been using KTC's Digital ratchet until now.
In use Alarm sounds when setting Torque is reached in Spec.
It is difficult to stop the tightening at the time of sounding but setting TorqueExactly to stop
If it's around 10N.m, it's not so much Over, but around 30N.m, it's up to the latter half of 31N.m.
The display goes and so on.
I'm not sure what's going on, so I'll stop at Mechanical's Cutting edge.
Buy MechanicalTorque wrench from Tonichi
Was the one you received as per Image?
as pictured
How was your experience with it?
The initial setup is a bit tedious.
I still feel more comfortable with Mechanical.
The easy-to-understand structure of the Torque, which can be locked with a click, is good.
There is just no visible N.m. indication, but it may be due to the degree of tightening.
I don't know, maybe it's Overtorque.
It's invisible, so it's good!
[Points to note]
So much so that I always drop the scale to at least Torque when I'm done using it and store it.
Digital ratchet is easier and hassle-free in this area.
How did it compare to other products?
Digital ratchet is a method of specifying the target Torque as a number and stopping it when it sounds.
Simple and easy to use for everyone, but the Spec.
Tightening multiple parts is difficult to do quickly.
The preliminary alarm sounds, and from there the main alarm sounds and reaches the set torque, but it takes a long time to close from the preliminary alarm to the main alarm while watching the situation slowly.
On the other hand, with Tonichi's MechanicalTorque wrench, it's just a click and you're done.
I can tighten them one after another.
Of course, if you tighten it with a lot of force or over the zone of idling after cutting, it will over, but if you do it normally, it can be tightened precisely.
I don't often use both Digital and Mechanical, but I'll probably end up using only Mechanical.
View detail
Expect durability
I bought this because my long-time Socket was getting a little licky. 900SS Cowl removal is 4mm, so I use it a lot. I tried it out right away and the new one chews very well indeed, no more worries about Bolt licking it. View detail
If you're not good at it, you'll break it. You're not good at it.
Hit it straight, don't rush, and take your time.
I didn't expect it to break... I wish I had a couple of spares.
I don't think we are in a hurry.
The work doesn't stop and it doesn't take time to make arrangements.
Do not make the mistake of matching the Chain size!
View detail
To use Point
I recently used it in a Tire replacement.
I was A little inquisitive as to whether this was the right way to use it.
View detail
This eliminates the need to search for tools.
Rose and kept it in my toolbox. Separate from the tools for my main job,
It is stored in the Motorcycle garage. I use it by hooking it to the Neodymium Hook as shown in the picture, considering that it is easy to understand and within easy reach.
View detail
Drumstickn, Drumstickn!
I often make my own parts for ZEPHYR400 and CUB90. I often use Aluminum plate as material.
For the cutout, we used different tools depending on the thickness:Gold scissors tend to bend the object while cutting, and an iron saw tends to blur the cutting line. It took a lot of time and effort to make the final correction and polish it to make it less noticeable.
I had never seen SK-11's Hand nibbler tool in person, so I did not have an Image to use it. I had never seen a hand nibbler before, so I did not have an image of using it. I purchased it and found it easy to use, and I enjoyed cutting aluminum and steel plates. It is not like cutting with a normal scissors, but with a drumstick, a drumstick, a drumstick.
The blade is a sturdy Square Type with a thickness of approximately 6mm. The blade is clamped between the blade and the board, and the blade moves down and cuts off the board in one grip. The grip force varies depending on the material and thickness to be cut; even aluminum plates are quite tiring. It is easier to cut by gripping the blade or placing the lower side of the fixed grip against the flat surface of the worktable and pushing the working grip in with your arm strength.
I had a person with a weak grip use it; he could not cut a 1mm Aluminum board with one grip. I think it has something to do with the strength. I'm afraid that if I force myself to grip it too tight, I'll hurt my fingernails." I was told. I could use a leather hand, but it is dangerous and difficult to slip.
Because of the thickness of the blade, the cut will drop about 6mm worth of cuttings. In the case of an iron saw, it will be about 2mm worth of iron dust. It is better to use different tools considering the labor and the processing time after cutting.
The blade bite was good when new, but the blade is starting to round off a bit. It would be nice to replace or polish the blade, but since it is inexpensive, it may be a good idea to replace it.
If you want to make longer cuts, you can choose an electric saw. However, for small workpieces, SK-11's Hand nibbler is sufficient.
View detail
Convenient to carry
Compact and very good for motorcycle loading View detail
Expensive but good product.
I bought it for a place where I really want to fix Wiring.
It's Titanium, so it's expensive, but I'm satisfied.
View detail
Normal for a Ratchet.
For some reason I didn't have a Ratchet in this shape, so I bought one.
Those who want to turn the machine in fine steps in a deft manner may find it a little lacking.
View detail
no problem
There were no problems, and the product could be used normally. View detail
Necessities
This is a necessity when replacing Oil.
It is very convenient because it can be discarded as household Garbage.
View detail
Only special tools can do this.
In order to revive the immobilized YamahaRZ350, I set out to overhaul it, but the Pulley remover I had on hand was not enough to get the job done. I knew the power of the special tool from my previous experience of removing a bicycle without a co-sauce, so I searched for it and found this YamahaOEM tool at a reasonable price. The feeling is that there is no rattling, and I can put a lot of power into it. However, it didn't shake, probably because it was an old motorcycle, so I applied more force with the Expander and was able to remove it safely. There was no sign of overworking the tool, and I am glad I purchased it. View detail
Heart breaker!
First and foremost, we must note that the BALI in the cutting process is quite bad, and honestly, it is the Level that causes injury.
If it is a FOR JAPAN MODEL product, I think it is a hesitant Level to ship the product as it is.
And it is not very good as accuracy, and the Center axis is also blurred.
However, it does not mean that it cannot be used at all. If BALI is removed sesse-sese-sese and military gloves are used, it is not impossible to use it.
However, we do not anticipate that the product will be used many times, and we hope that you will consider it as a disposable level for this time.
Personally, I would urge everyone to choose a more solid product when considering it as a tool.
well ♪ Hyakkety-yak ♪ It is possible for people who understand the concept of "Level" to purchase the product.
View detail
Easy to use
Purchased for Small TypeRatchet, cost performance is high with Holder set. Easy to use even in tight spaces. View detail
Purchased for Torque wrench
Purchased for Torque wrench. However, the Holder cracked rather easily if I didn't pinch it properly. View detail