Reviews
Perfect for the hot season!
Was the one you received as per Image?
Purchased for summer work. I like that the fabric is thin and cool, just as I expected.
The color looks close to White in the photo, but in reality it is exactly as shown. Light gray It is
[How did you feel about the Fit?
I am 170cm tall and 60kg and the size M fits me perfectly.
How was your experience with it?
I chose the one without YAMAHALogo, but it is still a good parenthesis.
[Was there anything that disappointed you?
Is the price a little high for work clothes?
View detail
Can be used without problems
This is the first Chain Tool I bought, so I can't compare it with others, but I had no problem using it.
Since the cast surface of the Gold genus is intact, it is likely to rust the next time it is used unless it is treated against rust after use.
View detail
It looks like it will fit in the stated capacity.
2.The product is up to 5L, but it seemed like a Limit at about 2.3L.
It's in there with no problem, so it's supposed to be in there as described.
It's much easier to dispose of than the previous Dan Ball box was.
View detail
For DIYCustom.
This is an unusual Size and will be useful for DIYCustomers. View detail
It can be used without problems
I used it to tighten the Stem Nut on my Motorcycle during the Restore process, I used it on a Plate type Torque wrench and was satisfied with the Torque management without any problems. View detail
For Wiring of Race Vehicles
I purchased Wire to match Race regulation.
Wires also come in different thicknesses, and although thicker wires are fine for the drain bord and filler caps, fine places such as the split pins of Caliper cannot be wound with thicker wires, so we purchased thinner wires.
Since it is long enough to last almost a lifetime, I think it is cosmetically sound because once you buy it, you will be able to use it for quite a long time.
View detail
Length and Working Space
We needed to change the Bolt that holds the Exhaust System in place, so we went with this one.
I would have been happy with one, but it's not perishable, so I'll keep it in the Screw box in case I use it someday.
View detail
It was pretty good.
Having recently purchased a 125cc vehicle for commuting, I wanted an inexpensive, discreetly designed shoe that I could wear to work.
These Shoes have a toe tip like safety shoes, and are neither good nor bad in terms of comfort.
The first time I used it, I had to take public transportation to get to a remote location to deliver a motorcycle, and I had to walk quite a distance. It was a hot day, but I didn't feel any steam, and I didn't notice any weight. However, whether it was because of the way I walked or the shape of my feet, the edges of the tip of the tip-core hit the area slightly above the base of my thumb, and I felt discomfort, until finally I felt pain. In my case, it seems that I should avoid walking for a long time in these shoes. Well, since I bought these shoes for commuting to work, I don't expect to walk for a long time, so there is no problem.
Walking was tough, but I had no problem operating the Motorcycle GEAR and Brakes, and felt that they were rather easy to use.
As for the size, I usually buy 26.5 cm shoes, but there were several reviews that said these shoes were Large size, so I bought 26.0 cm ones this time and they were just the right size.
First, the laces that came with the shoes were short, perhaps because of my high instep, and it was difficult to cover the knot with the strap, so I purchased a slightly longer strap separately and replaced it with a longer one. Next, regarding the ankle strap, the length of the Strap itself is sufficient, but because the Velcro portion of the Strap is short, the surface to which it is attached becomes small when it is tightly tightened, and it sometimes comes off before you know it, which is dangerous if it gets caught on a footpeg or something, so you need to adjust the tightening. Also, the lining of the Strap has a tear after the third use.
I have listed a few disappointments, but I like the design and texture, and it was cheap, so I have no complaints. I don't know about the durability of the main parts yet, so I will preface this by saying that so far, I feel that the cost performance is good. Since I use it for commuting, I expect to use it more often than my Shoes, but I hope it will last more than a year.
View detail
Easy to use
It is easy to use and comes with gloves. Also, it is cheap, so it is a Repeat purchase. View detail
For crafts
Purchased to secure aluminum plate when cutting out and drilling holes
It is working as expected.
View detail
Stem wrench, this is all you need
[How is it used?
The XR230 Stem has a bad habit of coming loose, so I tighten it up regularly with this.
So far I have not had any problems using it.
It is very inexpensive, so it is convenient to keep one of these in your tool box.
View detail
It's a good thing to have.
The socket system was unified with a 3/8 socket angle, but only Impact had a 1/2 size socket angle, so we could not share the same socket. I bought this one because it is cheap and can be shared. I am not dissatisfied with the quality and usability. View detail
3/8Deep socket
Other than that, it is usually possible to set the Socket to Quantity:I wanted a Deep socket since I have it as a Set. I purchased 6 types of this product for my needs of Size, 8, 10, 12, 14, 17, and 16 (Plug socket). 。 The Bolt and Nut are firmly supported when tightening and unfastening, and I felt a sense of security when using the Bolt and Nut. 。 Also, the size markings are clearly written, so they are easy to read. I just started using it, so I am not sure about its durability, but it is well made, so I do not think it will be a problem. 。 I am very happy with it View detail
The one and only Tool that grinds Caliper pods
I'm not sure what else Tool can do for you.
It is the one and only Tool to grind Caliper pods and you may want to have one!
I've never used the other one, so I can't compare, but it gripped the pod well and was able to grind away!
Click here for the Bad replacement procedure.
https://imp.webike.net/article/636859/
View detail
Combined with the company's Universal Radiator Hose, it is a savior for old car riders.
The pipe itself is not made of soft aluminum or brass, but a solid iron-like pipe. The pipe itself is not made of soft aluminum or brass, but of solid iron, so there is no deformation of the pipe due to tightening of the band, and it can be tightened firmly, so there is no leakage even if pressure is applied.
The ends of the pipe are also thickened to prevent the hose from falling out, so as long as the hose band is properly tightened, the hose will not fall out even if pressure is applied.
View detail
I am afraid of Short and I love it!
I love it because I had a scary experience with it once when I was changing batteries on my Motorcycle and I had to short it out! It is a little on the Large side for Motorcycle use, but I have no problem using it! It is a little bit Large for Motorcycle use, but I can use it without any problem! I am very happy with this product! View detail
Easy and clean on the go!
I put it in the Accessory CaseSpace under the Seat and clean it at the Touring destination. I am happy to be able to clean the Helmet and Cowl in just the right size. I also use it in the summer, and I like that it does not dry out the Seat and is pleasant to use. View detail
Oil absorption is not good
I used it to replace oil in my Ninja 1000.
It is 3.2L when not replacing Element, but it does not suck completely.
4.You said this is for 5L.
I really thought that if I smoked 4.5L I would probably get tapped out.
The only way to handle this is to add old newspapers or Dustcloth.
Think of it as the cost of the box.
These products are hit or miss, and it is better to use a reliable product.
View detail
Purchased oilfor replacement for ninja1000
Items necessary when changing oil.
It can be disposed of as combustible trash as it is.
I think I will continue to Repeat Emon because other Manufacturers are expensive.
The only drawback is that the Oil will ooze out and if you don't double wrap the Vinyl and dump it, the rest will look Large weird.
View detail
Used to disassemble Clutch in LETS4Palette
I bought this because I needed it to loosen the 34mm nut when disassembling the Clutch on the LETS4Palette.
I chose this one because of its high cost performance, and I had no problems with its functionality or strength.
View detail