Reviews
Fits: HONDA Dio (DIO), HONDA Dio SR (DIO), HONDA Dio ZX (DIO), HONDA Dio ZX (DIO), HONDA Dio cesta (DIO CHESTA)
AF35 LIVEDioZX Rear Brake Wire
I used Wire injector and OilUp, but it doesn't improve much. There may be a problem in the structure. View detail
A little short?
I used it to service my 30 year old GORILLA. I replaced all the wires (Clutch, Brake and Throttle) and for some reason all the wires were about 20mm shorter than the NORMAL. The installation itself is doable, but it is a bit severe to handle. View detail
Installation could not be done
I bought it for LETS II, but the diameter of Adjuster bolt was large and it could not be installed. Is there a different type in the same model?
I think that it was better to confirm when purchasing.
View detail
Fits: HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB)
BrakeWire
When CUB of my car exceeds 28000 kilometers and Front brake is hung, Lever has bad return and there was a purchase with Brake Shoe at the same time. The installation was attached somehow by connecting with the old Wire. View detail
Fits: HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB)
As expected
The difference with OEM is just a few hundred yen. But this accumulation will be the resultant Gold amount. This series is recommended for Full Restore. Because it is OEMOEM, it is natural View detail
Fits: SUZUKI ADDRESS V100 (Address), SUZUKI ADDRESS V100 (Address), SUZUKI ADDRESS V100 (Address)
The price is reasonable.
I replaced it because the OEM Cable got stuck and movement was sharp.
I was planning to purchase an OEM, but it is awkward to find ProductNo, I bought NTB's OEM ShapeCable.
I could do the installation without problems. - - - - To the middle - - -
Finally when installing Spring on Brake Shoe's side, the Gold genre Crimp part of Cable outer was thicker than OEM and Spring did not enter.
As a result, we were able to successfully install a Crimp diving diary in Grinder.
I think that there are individual differences, but in some cases it may be good to buy it with processing in mind.
View detail
Bimmy on Elbow ...
SR400 【Year of 2003】 And we are exchanging Handlebar with DAYTONA's Trucker bar. Because the height and width have been changed from OEMHandlebar, Clutch Cable also purchased this item 10Centimeter longer than OEM Length.
I felt that Spring is wrapped around the Cable part and the adjustment range is small difference with the other company's products.
For reasons of 3 ☆ as an evaluation ... less adjustment range by exchanging, not having handling Instruction Manual attached, price etc etc. It is the result that comprehensively judged.
In the future, deterioration degree of Spring wound in Cable (rust etc etc. ) And the durability of Cable itself etc.. We will focus on.
View detail
It is simultaneous exchange at the time of a Handle and Throttle-wire exchange. Since the Adjuster which can be adjusted also in the middle is attached, a span of adjustable range spreads and this Brando's Clutch wire is O. However, it is deli
It is simultaneous exchange at the time of a Handle and Throttle-wire exchange.
Since the Adjuster which can be adjusted also in the middle is attached, a span of adjustable range spreads and this Brando's Clutch wire is O.
However, it is delicate in appearance.
View detail
Fits: YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400 CLASSIC
It purchases for the Webike Monitor Handle exchange. The goods of this Manufacturer are used each time. He is Brando who can trust it.
It purchases for the Webike Monitor
Handle exchange.
The goods of this Manufacturer are used each time.
He is Brando who can trust it.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA
[Webike Monitor] It is STAINLESS-STEEL Brake-ization to the occasion which exchanges the Brake shoe since it was old although the original manufacturer's product was used until now [ ]. It was OK in Pons attachment at the Normal holder.
[Webike Monitor] It is STAINLESS-STEEL Brake-ization to the occasion which exchanges the
Brake shoe since it was old although the original manufacturer's product was used until now [
].
It was OK in Pons attachment at the
Normal holder.
View detail
Die length was as assumption although pains was taken over attachment, without the diameter of an attaching part suiting although purchased by judgment by a picture.
Die length was as assumption although pains was taken over attachment, without the diameter of an attaching part suiting although purchased by judgment by a picture. View detail
Fits: YAMAHA GRAND AXIS, YAMAHA BWS(BWS), YAMAHA BWS100(BWS)
A difference is to [Webike-monitor] goods about whether it is individual specificity at a motion of a wire. Although it used having purchased before, before what was being used before had a bad lost motion and it used it at the beginning which was bou
A difference is to [Webike-monitor] goods about whether it is individual specificity at a motion of a wire.
Although it used having purchased before, before what was being used before had a bad lost motion and it used it at the beginning which was bought, it was the touch which must pour in wire oil.
The price was also cheap, and since it served satisfactorily when putting in oil, such thing kana was thought, but the wire merely moved satisfactorily at all what was purchased this time to the smooth.
I think that he will be Ali if it thinks at a price even if it considers individual specificity.
View detail
use vehicle type: -- reason for RZ250 (4L3) introduction: -- since I felt that die length was a little insufficient with the pure wire when the billet clutch lever kit of an antlion was introduced, 5-cm Long's product made from hurricane was purchased.
use vehicle type: -- reason for RZ250 (4L3) introduction: -- since I felt that die length was a little insufficient with the pure wire when the billet clutch lever kit of an antlion was introduced, 5-cm Long's product made from hurricane was purchased.
Although the other company was also taking out Long's cable, the manufacturer who is taking out die length as delicate as 5 cm was only a hurricane company.
Not die length that honestly considered but the wire of a losing [ futility ]-to management new article although it was delicately dissatisfied is the point that two points were [ that operation is light ] good.
However, since many manufacturers are taking out the wire also upwards as the statement, it is hard to call it recommendation.
I think that what is necessary is just to choose the thing of a pleased manufacturer's required die length.
Since a price does not change so much, either ... Only 5-cm Long recommends you the one more needed.
View detail