Reviews
Ideal for Wiring processing of homemade Parts!
I used it for the Wiring process of my own ShiftIndicator, and I strongly RECOMMEND using Protective Tubes like this one, as Wiring looks and durability sucks when left bare! I'm glad I bought it because it has withstood rain and UV rays for almost a year and is very durable! View detail
Soft, flexible and easy to use!
The material is soft and easy to put in and out of the wiring. It is also resistant to deterioration even when exposed to ultraviolet rays! It is easy to use, durable and Large satisfaction! View detail
For handling bare Wiring.
[How is it used?
The 27 year old Serow 225we rear blinker that I use for mountain play has developed exterior damage and poor contact, and I have decided to replace it. Wind for SEROW I purchased a new Blinker that is a crackpot Blinker.
It is common for cheap external blinkers and tail lamps, but there are many products that do not have the wiring integrated (it can't be helped that the wiring terminals are supposed to be processed...). I purchased this product because I wanted to do an OEM-like treatment.
How was your experience with it?
This product is used by cutting the end of the wiring wire through this product to match the length of the wiring wire, but it looks as good as an OEM product.
If we had treated the wiring as bare, we would have been concerned about durability and weather resistance, but this product is convenient in that respect and may have played a role in preventing unexpected trouble with electrical components.
It is also 2m long, so depending on the vehicle, it may be a good value product since it can cover 2 to 3 Wiring.
How did it compare to other products?
I have never used other companies' products of this type, so I can't compare them, but I guess there is not much difference in Large.
It has been in use for about two years, and so far no surface hardening or other deterioration has been observed, probably because it is not constantly exposed to ultraviolet light because it runs inside the exterior.
[Points to note]
There are several different sizes in the lineup, depending on the thickness and number of wires you want to cover. So, please check carefully before you buy.
This is not a type of harness tube that shrinks when heated, so please check it carefully before purchasing.
Other items that would be helpful
The deciding factor in the purchase
[How is it used? This is a duplicate of what I filled out in the column, but when I searched Webike for an OEM-style Wiring process, it was a product that was eligible for Timing Good Sale.
【Included Parts:presence or absence】.
This product is only 2m long and is a very simple package.
[ITEMS TO BUY TOGETHER
Harness tape to stop the border between this product and the wiring, coupler or Bullet Type Terminal to connect the wiring of other brand products to the OEM product, and various types of wiring for when the wiring of the external electrical components is too short, WiringCaulking Tooletc. to install them, you will be able to work smoothly until installation.
Opinions and requests to Manufacturer.
I know this is not a product that will always sell well, but there will always be people who need it, so please keep selling it as long as you can.
View detail
Purchased for Wiring handling
Quantity of electric wire:However, since we used Bullet Type Terminal to extend the wires, it was the right choice (even this product was quite limited when we tried to use Bullet Type Terminal). (When I tried to pass through the Bullet Type Terminal, even this product was quite limiting). The thickness also looks sturdy and good. View detail
Price increased but quality is good
We use it to store cords for bicycles and security cameras as well as motorcycles.
Motorcycle electrical systems can be improved simply by using a harness tube like this one.
Unique to amateur DIY "Messiness." disappears and becomes Stylish.
Also, it's UV and stain protection, so RECOMMENDATION!!!
The unfortunate part is that the price has gone up… even though it's only a few hundred yen, the original price was low.
Pretty disappointed, but the quality is as good as ever, so I'll keep buying!
View detail
It was not very practical.
[How is it used?
I wanted to use it to consolidate and redo Wiring, which is why I decided to purchase it.
How was your experience with it?
It was not very practical, as it lacked elongation and did not fit very well through Wiring.
Wiring is also limited to about two wires, and only HornWiring can be used.
How did it compare to other products?
I think Heat Shrink Tube was better.
[Points to note]
I thought the thicker Harness tube was better because it was more universal.
View detail
Used for Protective Tube of 6V MONKEY/GORILLA Main Harness
Used to play 6V MONKEY/GORILLA Main Harness on GT80. The original Protective Tube had become hardened and chica-chica, so I used it to replace it. After the replacement, the harness became more flexible and I was able to handle the wiring without difficulty. The 1M sales unit is a big help because I could only find other products in 20M or 50M. View detail
DAYTONA Harness tube
[How is it used?
When replacing the blinker, the blinker is replaced with a new one. Wiring was used for protection and waterproofing.
How was your experience with it?
I bought a longer one, so I wondered if it would be too much. I thought it would be a good fit, but it was surprisingly just right.
I think it is supposed to be thermo-compression bonded, but I fixed it with inHemp palmac and harness tube.
How did it compare to other products?
I have not purchased any others, but since they are not expensive and sold by DAYTONA, I think this one will suffice.
View detail
Back, I have a theory that it will be unavailable.
I used to be quite fond of the Black GlassTube for protecting the Wiring section, but I had wondered why Black was being discontinued in many Cases recently.
Apparently it's part of the global regulation of rohs? The Black GlassTube is apparently out of stock.
I'm not sure how beautiful it would be to have a BlackFrame with White GlassTube protection.
View detail
To hide the Wiring around the Handlebar.
Used for Wiring around Handlebar of FXDL1450.
Compared to the OEM Vinyl type, it gives a crisp and custom feel.
You can also choose the length & thickness.
View detail
Required for Homebrew Harness
I use it to finish my homemade Harness.
I use this to protect my Wiring as it is basically a no-no to leave it naked.
I think it could be a bit cheaper.
It's expensive to use a small package.
It is very helpful that they are readily available at supply stores.
View detail
Best for heat resistant Wiring part
I used NeoFACTORY's Colgate tube and it was good, so I bought the Silicon tube this time.
The effect of heat resistance is not understood well yet, but I tried to adhere to the Engine which became hot, but I think that there is heat resistance effect and it is not easy to kink, so it is helpful.
Anyway, the price is cheap, so it is very helpful.
View detail
Battle at price
This is the second time I've ordered this product, and I bought it again because it nicely hides the various power cords sticking out from the outside.
Anyway, if you put 1 pc in Garage, it will be useful for something.
View detail
It is easy to use
It is safer to use a double coating for power wirings
I often use it because it is easier to handle than Colgate Tube
φ8 Tubes 1.25sq wire Quantity:The 2pc can easily pass through
Photo from Battery (1.25sqxQuantity):(2pc) I'm going through Wiring
The M6 Hoe Type Terminal can be threaded with it attached
It is just a PVC tube though it is for wiring, and there is no indication about the pressure resistance and heat resistance
It would simply protect the wire from mechanical rubbing, etc
How manyQuantity in the toolbox, as it is ready to use when needed and the 2m is used up quickly:These are the Parts you'll want to set or prepare
View detail
Used for rewiring of old car Just the right size
Because my motorcycle is an old car, Wiring will start to lower the voltage with ageing, so I will pull it out again
I used it, and although this Size is just fine for a Wiring or two, the city MotorcycleParts store
It's very helpful because many of the ones sold at the three stores have thicker ones and the thin ones are not sold
View detail
Wiring is clean
It's used for the Wiring Cover of CYGNUS X, MONKEY's external power supply and outlet
The way to use it is to put it over the cord that was taken out of the power supply by an individual It's not so pretty with the direct exposure to the Handlebar and Meter area etc But by interrupting it in the Slit tube, it's neat and tidy
You can do beautifully even with Heat Shrink Tube, but if you have a coupler or something like that, you can use it I have to remove the tube from the Coupler and install it and then play the Coupler again It's very easy to store with this Slit tube
View detail
Easy shrinkage with Dryer
Quality is solid; used for Wiring connections on SEA BASS motorcycles Shrinks easily with Dryer
You can buy it as a Stock if you order it with other things at We-BigSale for a discount Maybe
View detail
Quality is assured
Quality is solid; used for Wiring connections on SEA BASS Motorcycles
You can buy it as a Stock if you order it with other things at We-BigSale for a discount Maybe
View detail
I stiff too much and can not handle ordinary.
Harley 's Parts shop items, but it is difficult even to bend stiff. It looks like Mesh Tube, but it does not stretch at all. I thought about using it for Wiring but it became a Garbage. View detail
cheap
Although I was slightly worried because it was cheap, texture etc.. I think that it is a very good product, unchanged from the Manufacturer object. I do not know whether durability will make a difference, but there is no problem to use normally. View detail