Reviews
I am less prone to headaches!
It has layers of SoftSponge and Semi-hardSponge with Seal for easy application, and when I put it in the Reverse side of my Helmet cap and tried it on, it was painful because of the tension of the bee so far, but it didn't bother me at all!
SHOEI's Helmet, which I liked but had put away without use because it hurt when I put it on, has been restored to the army! I wish I had known about this product earlier.
View detail
Fishing adjustment for Helmet.
If you choose a loose size, there will be a gap above your head and the position of the helmet will not be stable. In such cases, the Universal Fishing Spacer comes in handy. There are three different thicknesses to fit the gap. Cut and use according to the shape of the interior.
This is the second time I purchased this product. This time I used 6mm because the gap is small, and I cut and pasted it according to the shape of the foam so that it would not obstruct the airflow of the helmet.
Before Fishing, I had trouble with the Glasses hitting or being held in my ears each time I put it on, but after the Fishing adjustment, the position of the headband became more stable.
If you feel that Helmet is not loose but not stable, try it.
View detail
To prevent the Helmet from shifting.
With my previous Helmet, I had a headache due to Gap while Riding for long periods of time, but the Adjustment Sponge has eliminated this problem.
This product is also comfortable on hot days because Sponge absorbs sweat.
The helmet fits snugly and is comfortable to wear, allowing you to concentrate on your riding, which is doubly safe and secure.
View detail
Could not be used for X-ROAD II.
This is not Webig's fault, but we tried to install this on our X-ROAD II, but there was no space to insert it, so we could not install it.
The package says it is also compatible with II, but the product labeling is incorrect to begin with.
View detail
There is a LARGE difference between with and without!
The chin portion protrudes from the helmet shape, so it was easy for wind to get caught in the helmet, but this has considerably eased the problem.
It is essential for winter and high speed driving!
View detail
If you are interested in Helmet's Size, you can find it here!
Best of all, it is inexpensive!
This Sponge can be cut as well as pasted, so the size can be adjusted by pasting it on the part of the Helmet that you are interested in.
In my case, the size of the Helmet I purchased was a bit Oversized.
We were able to match them beautifully.
Many modern helmets allow you to adjust the interior, but you can use basic subtraction to make some of the interior Sponge "Unplugged." Because it takes shape,
A little tighter..." If this is the case, there is no other way but to replace the interior.
I think it is possible to try this product for a while before that.
View detail
For X14 Interior Repair
After washing the interior of my X14, the Sponge on the top of my head was falling apart, so I bought this product FOR REPAIR.
Cut the missing sponge part to a large size, and cut it further so as not to block the air hole part.
Attached to firing Styrene on HelmetBody.
You can easily cut it into any shape you want with Scissors.
The original Sponge was sagging, so even with 6mm thickness, the Fit feeling seems to have improved.
View detail
I chopped it up and used it.
I could have used it as is for the interior of the GT-air, but there are many gaps, so I cut it to fit it. It fits well on my head and is much more comfortable to wear. View detail
Fits: その他 A-FORCE RS JET, その他 G-FORCE-SS-JET
It will be stronger as a helmet, but… it will also be more durable.
When fitted, the helmet becomes stronger and more secure when touring at faster speeds.
However, when installed, the Visor part is wide and provides good visibility, but the chin guard is too low and the top of the nose guard comes under the nostrils, which is very bothersome while driving. As a result, I have to remove the nose guard when I wear it, and I think the Visor fogging up considerably in winter. I am not particularly large, nor do I have a passive mouth, so I am sure there are many people with this problem.
This is a recommendation for those who consider strength and safety to be the purpose. On the other hand, it is not a recommendation for those who consider the prevention of fogging and appearance of the Visor to be important.
View detail
It was a nice Fit.
I used it to adjust the Helmet Size in EuropeSpec. As mentioned in the other imprements, I used it by pasting it inside the HelmetBody instead of the Inner.:It is 1 set of 2pc. and can be adjusted by overlapping. if you put it on Inner, it will come off when you wash Inner and it is not likely to be reusable. View detail
To adjust the size.
It is just right for Helmet Position adjustment, easy to use! View detail
Replacement brings Helmet back to life!
Since this is the part that deteriorates the most, Helmet was revived after the replacement.
Hold of the whole Helmet is also getting better, and if you start to worry about deterioration.
Early replacement is recommended.
It may be a little hard to remove, so be careful not to damage it.
Required.
View detail
HelmetSize adjustment
There are many different Size Adjustment Sponge for Helmet, but I think this WINS product is a very good product at a very reasonable price.
The Instruction Manual says to remove the InnerPad and attach the adjustment pad to the InnerPad, but I attached it to the inside of the helmet body. 。 It was more securely attached that way.
Oh, and the back of the head and overhead Pad came in two pieces each, so very affordable.
View detail
It is easy to use.
I used it to adjust the interior of X-lite's X-803 RS.
I had the fitting done at the FiveStar store, but after using it for about a year and getting used to wearing it, I purchased this item to make it tighter.
The feel is good, and the double-sided tape is rather strong and can be applied firmly. The tape is wide, so please cut it as needed.
This time, we increased the top and back of the head area, and also increased the cheek pad slightly.
I checked afterwards, and the fine tuning was successful and made it difficult to Gap even in the Circuit speed range.
X-lite costs about 9,000 yen for the Cheek pad alone, and it cannot be fine-tuned, so having a product like this is very helpful.
View detail
Unfortunately, I cannot paste it well.
It was difficult for me to paste it into Helmet.
The glue is sticky and does not come off cleanly.
Adjustments are also difficult.
Too bad.
View detail
Adjustment of loose helmets
I bought a helmet of a size that was easy to put on, but I found that it did not fit my head size, so I bought this one.
It is a universal product, so it is not perfect, but the Inner Pad fits tightly to the head and creates a sense of envelopment.
WeBig would be happy to be able to provide FittingService for Helmet.
View detail
Worth a try, for fine tuning, before replacing the interior.
It is said that the best way to select the size of helmet is to try it on, but the best way is not to try on a new helmet, but to try on a helmet that has been used to some extent and the interior has become accustomed to it. (Hetero) The condition would be desirable, but then I would have to try on the ones of people I know, and the MODEL I want is not always available. In general, helmets are not replaced that often, but the interior will always be worn out. Even if you choose a tighter fit when it is new, it may become looser than expected. In my case, with ARAI, I am JUST an XL when new, and an L is too tight, even assuming interior Downs. But I am an ARAI believer and have 4 Helmets, all ARAIRX7. I have 4 helmets, all of which are ARAI RX7, and I use them according to the motorcycle I ride and the wear I'm wearing at the time, but I still have a bias in how often I use them, and even with the same model, there are differences in fit. I like RX7X Kiyonari Birdco, which I have been using frequently recently, but when I ride Panigale, which has a tight forward lean, sometimes it becomes forward leaning, so I thought about changing the ARAIOEM System interior from the standard 7" to 10", but it is made-to-order and the delivery time is 3 months! The price is also about 4,000 yen.
So we decided to try this product anyway.
Result? ... ・ Except for the cheek pad, the fit is considerably improved, but not too tight. It is also less likely to drop forward. The only thing left to be seen is how long it will last, but since it is inexpensive, I will replace it if it gets loose again. I bought two of these for other helmets as well.
Easy to install. Kitchin and Quantity:If you set the double-sided tape, the adhesive will not shift in some places. It may be better not to stick the double-sided tape too tightly, considering the possibility of positional adjustments or replacement.
In the case of RX7X, the air inlet hole in the center is covered, so we cut that part only.
I would recommend this to anyone who wants to regain the fit of their favorite helmet that has become a bit loose.
It's worth a try.
View detail
Do-it-yourself HelmetFitting adjustment
I tried to adjust the fittings based on Niigata 2 Rinkan's April 9 blog, as I had renewed the interior.
I added Sponge because there is a gap in the front and back and top and bottom when I put it on.
The tape on the sponge is very strong, so it is better to check the fitting before attaching the sponge.
View detail
Any Shield.
In addition to the 72-jam Bubble shield, it can also be used with Universal's Shield for Jet helmets.
Installation is easy and the adhesive surface to the Shield seems strong.
When run, the Shield is properly prevented from lifting.
One drawback is that our Shield has a wobble on the upper hook that makes a grating noise while driving.
View detail
Deodorant effect and sweat absorption effectLarge!
When touring in the summer, sweating and the smell of sweat make the inside of the helmet smell very unpleasant. The Helmet liner that I installed this time is not only deodorant effect and sweat absorption, but is also good because the hairstyle does not fall apart too much. It is also a high cost/performance product. View detail