Reviews
![[K・TOUR] Helmet Holder Type2](https://img.webike-cdn.net/catalogue/images/116399/80-564-14701_1_TS.jpg)
KITACO Helmet holder Type 2
The process was easy and took about 10 minutes to install!
It went on the JA65 with no problem and was convenient to use without having to think about where to store the Helmet.
View detail
Somewhat difficult to use...
Used on a ZX10R '24.
The box said it was for 16-17 year models, but the compatibility is perfect.
No problems at all.
The ZX-10R does not have a helmet lock, so I have to attach it myself,
The two choices are Largebody Babyface or KIJIMA.
This one is like a lock coming between the Tandem Footpeg Bar, so to be frank, it is difficult to hang a Helmet.
It may be even more difficult to install because people who ride ZX10R are almost full face.
If you get used to it, it is no problem, but if you install it roughly, the motorcycle and helmet will rub against each other,
Be careful when locking, even if it is troublesome.
View detail
![[K・TOUR] Helmet Holder](https://img.webike-cdn.net/catalogue/images/111680/80-564-13200_1_TS.jpg)
Quality is good
The quality is good and the installation was easy even for an amateur. However, I am not sure if it is just my car model or the installation location, but the noise that resonates with the vibration of the engine from near the key cylinder while driving is quite loud. View detail
Fits: KAWASAKI Z125 Pro, KAWASAKI Z125 (16), KAWASAKI Z125 (16)
KIJIMA Helmet lock installed on Z125pro
[How is it used?
Fitted to Street and TouringMotorcycle
Was the one you received as per Image?
Yes.
Was the installation difficult?
It was not difficult.
How was your experience with it?
This Motorcycle has a jOEMHelmet holder under the chair, but it is difficult to use. This makes it easier. even though it is an Other Brand Product, the quality is good enough.
[Included Parts:were they on?
Key is Quantity:1 Set of 2pcs. with KIJIMA's Smallest Sticker (I think).
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Instruction Manual is included. There is no problem if you follow the instructions. The bolt to be attached to the car body was purchased separately to prevent tampering. The available bolt standard is a little longer than the supplied one, so I added thickness to the body with a washer I had on hand.
View detail
It's still convenient.
I bought it because the OEM helmet lock is difficult to use because you have to remove the Seat every time you use it. It is still very convenient.
In the past, motorcycles usually came with this type of key from the beginning, but recently the number has been decreasing. I really hope that OEMs will install this type of key, as it will increase the number of keys.
View detail
having a preeminent presence
When attached to the handlebar, it has the presence of a glistening mass of gold. When you use it, set the Dial part to "Quantity:Pair (for Left and Right) Since the helmet rings are rotated 90-degrees to either side, there must be enough space at the mounting point to allow for rotation of the dial portion. The Gold attribute of the Body and the mounting parts touches the Handlebar directly, so it is better to use a thin rubber sheet or something similar to hold the Wound on the Handlebar. It is useful to use it as a Convenient Hook or to hang SensorAlarm. View detail
Fits: SUZUKI GIXXERSF250, SUZUKI GIXXER250, SUZUKI GIXXER150
KIJIMA Helmet lock
The installation was very simple!
Until Rubber gets used to it, it will move when you put a little force on it.
View detail
This is not a conversation.
The part where the clasp is hooked fell off during the product installation stage, and the product became Garbage as it was.
I bought this product because I believed in the brand, but this is not a good thing.
It's also a security product, for one thing.
View detail
The sense of security is different without it.
We installed it on a GSX-R125.
As a former victim of helmet theft, this is a must-have product.
To install, simply remove the Left Side Tandem Footpeg once and insert it between the two.
It is a very simple process.
In the meantime, we recommend retightening the screws with the proper torque to prevent the footpeg from falling.
View detail
Fits: BMW R1200R, BMW R1200RS, BMW R1250R, BMW R1250RS, BMW S1000RR
Helmet holder can be attached to SS
[How is it used?
Used for storage of Helmet
Was the one you received as per Image?
It was identical to the photo shown on the website.
Was the installation difficult?
Simply remove the Rear Footpeg and reinstall it across the Bracket.
Very easy.
Be careful with tools because the bolt is a torx bolt.
When installing the key on the bracket, be sure to follow the instructions for attaching the Screw Lock to the Screw.
How was your experience with it?
The Holder makes me feel very safe when I leave the Motorcycle.
Since the helmet comes exactly at the rear footpeg, care must be taken not to scratch the helmet.
It was available for the 2023 MODEL.
I had a hard time with Speedra's Helmet lock, but the mounting points will be in the same place.
However, KIJIMA's product has an extended bracket and can escape from footpeg, so this is adopted.
Speedra was forsaken for installation in the same location as the footpeg section.
Babyface was also considered, but the key part is shaped like Straight when it is opened,
I thought about the possibility of Helmet falling off, so I stopped.
KIJIMA and Speedra are expected to prevent falling due to their U-shape.
The frame is black and the bracket is also black, so they are the same color and inconspicuous.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA CB250F, HONDA CB1300 Super Four, HONDA CB400 SUPER FOUR, HONDA GROM, HONDA CB1300 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER BOL D'OR, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA VTR-F, HONDA VTR250, YAMAHA MAJESTYS, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA Forza300, HONDA CB500F
Pros and cons of locking with a key
Installed on pcx 125 jk05.
Installation is very easy as it is co-tightened to the Master Cylinder, and the limited space around the handlebar is good as it does not kill the space around the handlebar.
In addition to Helmet lock, it can also be used as a Convenient Hook.
I purchased this Type product that locks with a key for its security performance, but I find it troublesome to open and close the key every time.
I also find the increase in keys to be depressing.
This is a good product for people who don't mind having more keys and locking and unlocking them each time.
It doesn't hurt to have it on.
View detail
Not available
Installed on a ZX25R.
The installation itself is very easy and can be done quickly with a Hexagonal Wrench.
After installation, I tried to use it, but to my surprise, the Wire length was too short to use.
I have a Smartphone Holder attached to the Daytona Clamp Bar, but it gets in the way and hits me.
I am considering whether to remove the Smartphone Holder or the Wire lock that I have installed.
View detail
Rear Sets are removed and Helmet is fixed...
I purchased this product because of the difficulty.
To install, simply remove the Tandem FootpegBracket and secure with the included Bolt.
It is easy to install. and no practical problems.
View detail
Fits: SUZUKI GIXXERSF250, SUZUKI GIXXER250, SUZUKI GIXXER150
Is it required?
The frame shape has not changed, so the 2023 MODEL has been properly attached! View detail
To install Rear suspension of Tank Separated Type
This is because it interferes with the hydraulic tank of the Rear suspension.
There is nothing noteworthy about the texture or functionality, but the position for fixing the Helmet has been Offset forward, so that the Helmet can be just hooked onto the footpeg.
Helmet lock in #Tail direction sometimes hit the back of the helmet.
However, since the service manual instructs the application of a screw lock to the bolt fixing the tandem footpeg, we recommend the use of a socket wrench instead of a hexagonal bar wrench.
Parts cleaner and medium-strength screw lock are required to remove the remaining screw lock during installation.
Finally, if more parts are to be tightened together as shown in the photo, it is safer to prepare longer screws at a home center or the like.
View detail
Easier to use than OEM Wire type
The M6 Hexagon Socket Bolt that holds the OEM Tool Box in place is co-tightened to two bolts, a design that is also friendly to custom beginners.
Worse, if you loosen it, the whole helmet will be stolen, so it may be safer to replace it with a tamper-proof bolt or something similar.
View detail
You can buy with confidence
I bought it to use on my katana in 2023. It also fits my 23 year katana, so you can order it.
The price is affordable and it fits the car like genuine. Delivery is fast and very satisfied
Highly recommended. Looking forward to storing my helmet for my next tour.
Fighting all Katana riders --------------------------------------------- ------------- I bought it in 2023 for use in Katana. It fits well with Katana for 23 years, so you can order. The price is cheap and it goes well with the car like genuine. Delivery is also fast and very satisfied Highly recommended. I'm looking forward to storing a helmet on the next tour. All Katana Rider Fighting Powered by Google Translator
View detail
It is easy to install.！
I ordered it right after the delivery of my car because it is inconvenient to go anywhere without the easy-to-use helmet holder. 。 Installation was easier than I expected and I didn't have to worry about it. View detail
helmet lock
JA65 CT125 Korean model also fits well. Installation is relatively simple by removing/attaching the seat hinges. A bracket is installed at the bottom of the seat hinge, and the locking mechanism is bolted to the bracket. It is designed so that the bolt cannot be unlocked in the locked state, and the anti-theft effect seems appropriate. Since it is a single cylinder with severe vibration, it seems that a threadlock is needed for the fixing bolt. View detail
![[K・TOUR] Helmet Holder](https://img.webike-cdn.net/catalogue/images/117931/80-564-14610_1_TS.jpg)
of good quality
However, in my case, the position of the DRing did not reach the Holder because I used SHOEI's GT-air, so I had to purchase a separate wire to accommodate the DRing. The Holder side does not have any problem. The product is well made and looks good as the OEM Level. View detail