Reviews
GSR has a helmet hook under a sheet. So, it was very inconvenient when it equipped with a tailback. Then, what were chosen is the goods here. Although the easy mounting arrangement of carrying out a screw stop to a handlebar is also attractive
GSR has a helmet hook under a sheet.
So, it was very inconvenient when it equipped with a tailback.
Then, what were chosen is the goods here.
Although the easy mounting arrangement of carrying out a screw stop to a handlebar is also attractive, since the rubber is attached to the portion of the band, a handlebar does not have a fear of putting in a crack at the time of attachment.
Because it is its own car of its ... Have not you wanted to damage too?
Although it was uncomfortable at first, user-friendliness is also good if it gets used.
View detail
A helmet will be placed in the form hung since it is on a side although the helmet lock is attached to the ape from the first. Since I would be sad when the product and rain fell, he wanted to make it the form put on a handle, and this product was pur
A helmet will be placed in the form hung since it is on a side although the helmet lock is attached to the ape from the first.
Since I would be sad when the product and rain fell, he wanted to make it the form put on a handle, and this product was purchased.
The inside of the helmet needed to cease to get wet even if the rain which is the product and a cinch fell.
Since it becomes a form where a screw hides when it closes, although others are also being written, I think that it is good also for theft prevention.
Wearing is also about 5 minutes. It is recommended truly.
View detail
It is used attaching to CB750. Although two hooks on which a helmet can be hooked under a sheet were attached to CB750, when a sheet was not removed, use was a source of the trouble as removing is also improper, when improper, however a rear seat had
It is used attaching to CB750.
Although two hooks on which a helmet can be hooked under a sheet were attached to CB750, when a sheet was not removed, use was a source of the trouble as removing is also improper, when improper, however a rear seat had a load.
However, after attaching this, it becomes unnecessary to have cared about storage of a helmet, and became easy.
A price is also cheap and simplicity and this [ attachment's ] are very recommends.
View detail
CB1300SB was equipped. The pure helmet holder is attached to CB1300SB from the first, and it goes into a fairly easy-to-use category. However, the side bag is attached on touring, or when leaving a motorcycle just for a moment, I wished to place o
CB1300SB was equipped.
The pure helmet holder is attached to CB1300SB from the first, and it goes into a fairly easy-to-use category.
However, the side bag is attached on touring, or when leaving a motorcycle just for a moment, I wished to place on a tank.
Then, the helmet holder was attached to the bar handle.
The goods themselves are solid also in reinforcement and texture is not bad at plating, either.
View detail
Since VTR was inconvenient [ which cannot use a helmet holder at all ] Although the holder which the flexibility which does not become obstructive hears was looked for, it was not able to be found in the shop. Although it is slightly more expensive I
Since VTR was inconvenient [ which cannot use a helmet holder at all ] Although the holder which the flexibility which does not become obstructive hears was looked for, it was not able to be found in the shop.
Although it is slightly more expensive I think that it is very much good.
The woman has also equipped easily with one driver.
With this A helmet can be placed in comfort!
View detail
Helmet lock (PMC) attachment. Since a helmet can be placed on a tank, it is very convenient. When placing a helmet, cautions are required so that a crack may not be attached to a tank.
Helmet lock (PMC) attachment.
Since a helmet can be placed on a tank, it is very convenient.
When placing a helmet, cautions are required so that a crack may not be attached to a tank.
View detail
The management method of a helmet is considered and impression is seen to inside, and I hear that it can set on a tank, and it purchases and equips a handle with a wearing helmet. A brilliant success was carried out. Since it was hard to use an au
The management method of a helmet is considered and impression is seen to inside, and I hear that it can set on a tank, and it purchases and equips a handle with a wearing helmet.
A brilliant success was carried out.
Since it was hard to use an authentic positive one, it is very satisfactory.
Attachment is also easy! It is a five stars.
View detail
ER-6n is equipped. Since a just right pipe is not found in a car body, it attaches to the root of a mirror. Operation and mounting structure are quite good. However, since the pipe diameter which can be attached is restricted considerably, we
ER-6n is equipped.
Since a just right pipe is not found in a car body, it attaches to the root of a mirror.
Operation and mounting structure are quite good.
However, since the pipe diameter which can be attached is restricted considerably, we recommend you to attach in the case of purchase and to prepare a place just.
View detail
To the vario 2 of its own car, it was pure, and although the helmet holder was attached beside the sheet, it was disagreeable that sheathing and the car body of a helmet interfered and a wound was attached. An after-purchase handlebar is equipped, and
To the vario 2 of its own car, it was pure, and although the helmet holder was attached beside the sheet, it was disagreeable that sheathing and the car body of a helmet interfered and a wound was attached.
An after-purchase handlebar is equipped, and a helmet is placed on a tank and it is acting as Locke.
Since it is lost and the lug to the direction of a side is also lost, sheathing of a helmet of a wound being attached is also dramatically satisfactory.
View detail
It is used in 07VTR250. Since the pure helmet holder was thoroughly useless, it purchased. It has equipped beside bar handle stay. If it is going to attach an in play 1. full face below, the distance a tank and near a meter will become quite s
It is used in 07VTR250.
Since the pure helmet holder was thoroughly useless, it purchased.
It has equipped beside bar handle stay.
If it is going to attach an in play 1. full face below, the distance a tank and near a meter will become quite short, and it will be hard to equip a little.
2. Since keys increase in number, subtract for those who do not want to increase a key not much.
3. The portion fixed to a handlebar is [ the cheap ] a minus point a little.
As a good point, the screw hole of 1 and fixation is inside stay, and where Locke is applied, desorption of the helmet from the outside cannot be performed without a key.
2. Although the fixed portion is a little cheaper, the amount of upper part is solid, and even if it has equipped, it has got used, and is comfortable.
It is the said touch.
As himself, he buys it and I think that it was good.
Since it is not realistic to remove a sheet one by one whenever it removes a helmet by its vehicle type The direction which that keys increase in number worries may be best to use the carabiner of a general number lock type. ^^;
View detail
It attaches to a handle and is acting as Locke of the helmet in the state where it put on the tank. It is the point which it chose that it attaches in the state where it acted as Locke, and it hides and cannot remove a screw. It is compact and use
It attaches to a handle and is acting as Locke of the helmet in the state where it put on the tank.
It is the point which it chose that it attaches in the state where it acted as Locke, and it hides and cannot remove a screw.
It is compact and user-friendliness is also good.
View detail
It has attached to the V-Twin magna 250. Since the saddle bag is attached and it is in the place which is hard to use with the ability of an original helmet lock not to be used from the first, they use now, having purchased goods. Since a handleba
It has attached to the V-Twin magna 250.
Since the saddle bag is attached and it is in the place which is hard to use with the ability of an original helmet lock not to be used from the first, they use now, having purchased goods.
Since a handlebar is too thick and is not attached, it is using it, attaching to a sissy bar.
It can use enough.
View detail
A helmet holder was not in its own motorcycle, but covering a helmet over a mirror has resistance and it purchased. Since it was general-purpose, there were quite a many diameters of permission of a pipe. Since attachment is possible with one + dr
A helmet holder was not in its own motorcycle, but covering a helmet over a mirror has resistance and it purchased.
Since it was general-purpose, there were quite a many diameters of permission of a pipe.
Since attachment is possible with one + driver, and it cannot remove if there is no key although attached immediately, crime prevention nature seems to be high.
Since it was not attached near the key cylinder, evaluation is 4.
View detail
It attached to VTR250. It was easy to separate from a rubber spacer from metal fittings, and it took time in attachment for a while in the circumference of a narrow handle. Where a key is extracted and it is user-friendly.
It attached to VTR250.
It was easy to separate from a rubber spacer from metal fittings, and it took time in attachment for a while in the circumference of a narrow handle.
Where a key is extracted and it is user-friendly.
View detail
It is used even if it changes with VTR250 and the hornet 250. Since both of motorcycles do not have good structure of a helmet holder, they are found useful very much. - - which cannot be removed since the portion of a screw will overlap and they
It is used even if it changes with VTR250 and the hornet 250.
Since both of motorcycles do not have good structure of a helmet holder, they are found useful very much.
- - which cannot be removed since the portion of a screw will overlap and they will not enter a driver at all if those who cannot do maintenance since it can attach easily with one driver also close problem-less - Locke -- uniting with a car body and, since - appearance attached also to the circumference of a handle since it is not large is good,
The above advantages which can adjust thickness with the price and rubber to which it can be convinced are considering making - which does not look to the wind it attached since there was not pure Locke like a padlock.
If there are even the place and thickness to attach, a recommend will be carried out by all means.
Since it would attach to the handle right twist of a hornet and he would like to act to a mirror as Locke now, covering it, a helmet and Locke have been connected by the pure wire lock.
Since a pure holder cannot use its own motorcycle easily, it is not worried, but for some persons, a price may feel it high.
View detail
Since even the helmet holder which does not become useful was not attached to VTR250 of me purchased at the auction, this was attached to it, but it is satisfied very in a user friendly manner. it is recommended -- 笙ェ
Since even the helmet holder which does not become useful was not attached to VTR250 of me purchased at the auction, this was attached to it, but it is satisfied very in a user friendly manner.
it is recommended -- 笙ェ
View detail
The frame pipe of triumph DAYTONA675 was equipped. It can attach, if attached rubber parts are removed. Since it will become metal nakedness if rubber parts are removed, a crack is easily attached to a frame pipe. Although the commercial vinyl
The frame pipe of triumph DAYTONA675 was equipped.
It can attach, if attached rubber parts are removed.
Since it will become metal nakedness if rubber parts are removed, a crack is easily attached to a frame pipe.
Although the commercial vinyl tape was rolled round 1 round in the measure against a crack to the paintwork of a frame pipe, it user-friendliness - Attaches [ both ], and it is dramatically easy and is saved as the direction of the others which are satisfactory for the moment is written.
View detail
Although it is easy wearing in one driver of a plus, since the internal surface is only taken, the rubber for size adjustment needs to keep in mind inserting in a pipe frame etc. so that it may not drop on a narrow place. It is small regrettable kana
Although it is easy wearing in one driver of a plus, since the internal surface is only taken, the rubber for size adjustment needs to keep in mind inserting in a pipe frame etc. so that it may not drop on a narrow place.
It is small regrettable kana that it can insert, without making it reversed also in a dimly lighted place since it is a double-sided key, but it cannot act as Locke, with a key extracted.
Conversely, when making it open wide, if a key is twisted, Locke separates with sufficient energy in ? worked by a spring, and it is pleasant.
Although he planned to have used it for the frame of BMWF650GS, a size did not suit well and it equipped the handle after all.
View detail
It is used by VTR250. It attaches to a handlebar and placed the helmet on the tank. It became easy when parking.
It is used by VTR250.
It attaches to a handlebar and placed the helmet on the tank.
It became easy when parking.
View detail
To VTR250, I think that it is a configuration good in crime prevention since a screw cannot be accessed unless it removes Locke who a helmet holder was not attached but purchased, though regrettable (if you think that I seem to be earnest and fearful, it
To VTR250, I think that it is a configuration good in crime prevention since a screw cannot be accessed unless it removes Locke who a helmet holder was not attached but purchased, though regrettable (if you think that I seem to be earnest and fearful, it will break, but).
a helmet is not brought to the prank purpose -- as it is, it is user-friendly, and recommended
View detail