Reviews
Products with a little Habit
Used as Loading Hook for Every Van.
The Hook section is reluctant to move when tightened, so it does not move unnecessarily when not in use.
If there is an existing screw hole, there is no problem, but if you have to drill a hole to install it, it is not a problem.
It seems that there is a problem with the strength of the base material, so it is better to reinforce it with a plate, etc.
View detail
Also helps prevent deformation of the License Plate
I purchased Repeat following MT−09. I installed it for a hard-bound Hook when I have a little luggage on the road. It also helps to prevent deformation of the License Plate. I would be happy if the price is a little lower...so I gave it a Cost performance of 3. View detail
quality is very good
quality is very good and simple kawasaki chrome parts always good next time ill try one more time but price is so high kkk uu View detail
MT09 is available in long and short Quantity:It is better to buy Set.
I bought a long hook for the front side of the seat and a short hook for the back side.
The long one is a bit of a bad parenthesis, but it's practical and easy to use.
I use a hook bar on the license plate to hold my luggage in place.
View detail
Good item.
good point
Aluminum and light weight.
It's a thick plate, and it's well.
I can't get the hook on the touring net to come off.
License Plate "Bending Prank." This will help prevent the
The design is also good and refreshing.
A bad point
None.
View detail
Good product
good point
The body is aluminum and light.
I've been doing well, and I've never missed a hook on the touring net.
A bad point
None.
View detail
show ('-^*) ok！
I don't actually load it with luggage, but I bought it for the look. It's perfect! View detail
It's pretty sturdy and discreet, which is GOOD.
The XSR900 does not have a carrier, so I bought this to install a seat bag.
The steel plate is surprisingly thick and solid, and with the OEM mounting bolt, it is Limit length, so you may want to replace it.
I like the fact that it is not too noticeable when not in use.
View detail
Must-have items for seat bag loading
I bought this when I started camping touring.
Installation is super easy, just remove the bolt on the license plate and tighten it together.
I used it to load the Tanax Camping seat bag2 and Side bagGT, and the Plate part did not rattle or come off, and I was able to fix it stably.
This is a very good recommendation for those who use seat bags or side bags.
View detail
Highly Universal
[How is it used?
Used as a Hook for Cargo Net
Was the one you received as per Image?
Street Image
How was your experience with it?
I had an extra Cargo Net from without Hook, so I was looking for a product that I could purchase with just the Hook.
As a result, I was able to attach it to my Cargo Net without any problems, and I think it is a very universal product.
Other items that would be helpful
Installation Point or hang
When inserting the Cargo Net into the Hook, it is necessary to stretch the Rubber of the Cargo Net to make the diameter narrower, and since the Hook side is made of flexible resin, it is necessary to push it in with a little force.
View detail
It looks better now!
Glad I replaced it with a beautiful Gold that looks and feels more classy!
The only thing is that there is no drill for this kind of parts.
View detail
To Hook for Transporter of DA17V
I bought this as a Hook for my DA17V Transporter. It is solidly made and seems to be able to endure a considerable tension. At first I was looking for a suitable Universal Product in Home center, but when it was difficult to find easily, I found it in webike, so I bought it.
I bit into the driver/passenger fixed Bolt and saw that it was just right.
OEM Cover can also be covered when Hook is not in use
Quantity:I bought 2 sets, and I thought I would fix them to the Bolt (floor side) of the Seat belt of the Rear seat.
I had to extend the hole to 12mm because the sutra didn't fit.
It is easier to buy this product than to go around the home-centre, though the cost is not equal to the Universal Product of the home-centre.
View detail
M8 is better
I bought this product to fix my 25mm Belt, because the screw near the Carrier is M8 and I could only find this product. （The screw around the carrier is M8.)
It's a little expensive, but it can't be helped.
View detail
Fits: HONDA CBR125R, YAMAHA MAJESTYS, YAMAHA MAJESTYS, HONDA MONKEY125, HONDA FORZA Si, HONDA dunk, HONDA ZOOMERX, HONDA glom, HONDA glom, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA glom, HONDA PCX, HONDA PCX HYBRID, HONDA PCX, HONDA PCX, HONDA PCX, HONDA CB250F, HONDA CBR250R
Nice hook
This is a useful item. The installation is very simple. The delivery and packaging are excellent. I chose black. Simple is the best. View detail
Neat Design and good functionality.
I put on the REBEL250 with the Grab Bar Carrier of DAYTONA, and I put on the Touring Seat BagPRO of Henry beguine, but the belt buckle of Seat bag was not well positioned, and I could not fix it well, so I bought this one.
The design is clean and unobtrusive, even when not in use.
View detail
License Plate Protection
When I remove the seat on a weekend ride, the seat gets caught on the license plate quite a bit. "Won't you bend the License Plate someday?" I was wondering.
I installed the License Plate with confidence because there is an Instruction Manual with Large and strong though the regulation became severe recently.
Body is Quantity:Pair (for Left and Right) There was a place to hook up the Hook to, but I don't plan to use it. "Well, it might come in handy for something." and I think it's part of Design.
It seems to be strong with a thick plate, and installation is also easy by removing the screw of the license plate once and tightening it together.
Recommendation to License Plate protection.
View detail
If you're going to put a TouringBack on it, by all means.
This is a valuable part for the SEROW that has few places to hang cargo.
Since it is fixed firmly, there is no problem even if you fix TouringBack languidly.
View detail
It's strong, solid and easy to use. But depending on the Motorcycle…
The Plate is thick and I thought it would not bend even if I hooked the Touring net or Belt.
I think that even a beginner can do it with only one Driver because the installation is only to remove the License Plate and to put it between the Mounting Base.
However, since the license plate is attached with Bolt and Nut, it may be difficult to install depending on the car model because the Nut may be in a position where you can't put your fingers (mine was exactly like that).
I used it for Touring immediately, and Seat bag was fixed firmly, and it was quite good.
However, on my Motorcycle, the License Plate is attached to the Swing Arm, so even if I fix it Firmly, the suspension sinks when I sit down, so it looks a bit loose. I don't have any problems with riding, and I don't have to worry too much about the seat bag shifting, but I thought I'd write this to help others who have the same problem.
View detail
I used MOTOFIZZ's Plate hook (lol)
Slant License Bracket of DAYTONA and also Slant License Bracket of DAYTONA (OEMFender only) and Plate hookMF4612 of Moto fizz were used in combination. and Moto fizz Plate hook MF4612.
MOTOFIZZ MF4728 is machined by Leutor in the upper square hole. in the upper square hole.
Plate hookMF4612 with a Red Reflector (purchased at Webig) for a USDM look.
Please note that it is a violation to use this installation method on vehicles first registered on or after October 1, 2021.
My vehicle is registered in September 2021, so it's not applicable (laughs).
View detail
Tanax's Plate hook...
I used it in a different way than it was meant to be used.
I processed the hole to hang the Hook on the top so that the License Plate can be shifted to the bottom.
View detail