Reviews
![ผ้าคลุมรถจักรยานยนต์ Bond [KIZUNA]](https://img.webike-cdn.net/catalogue/images/43748/kizuna_01_TS.jpg)
Fits: HONDA DUNK, HONDA Giorno, HONDA TACT, HONDA TODAY, HONDA DIO, SUZUKI GS50, SUZUKI Let's All cars, SUZUKI ZZ (ZZ), SUZUKI STREET MAGIC, YAMAHA JOG, YAMAHA VINO
เนื้อผ้ามีคุณภาพดี กันน้ำได้ดี ปกป้องความร้อนจากแสงแดดได้พอสมควร ผ้าคลุมมีน้ำหนักเบา View detail
The easiest to use wire lock I've ever used.
I have used about 3 different braided wire locks from other companies and this product is the best.
It is written as hard wire, but it is actually an articulated type (It's like an endless series of universal joints.) Therefore, it is soft and easy to handle even in winter. With braided wire locks, the wire and the surrounding resin become hard in the winter when the temperature is low, and even after unlocking the lock, it is sometimes difficult to remove the lock from the wheel. I will switch to this product when the braided wire lock I use on my other motorcycles reaches the end of its service life.
Most braided wire locks have the same OEM manufacturer, so the lock and key are almost the same, but this product is different in that the key is one size smaller. Also, the other manufacturer's product allows the key to be removed after unlocking, but this product does not allow the key to be removed. In other words, you cannot put the Motorcycle key and the lock key directly on the same Key Holder. In my case, the same is true for other Motorcycles, but I attach the lock key to the Key Holder with Snap, and when I ride my Motorcycle, I remove the lock key from the Key Holder to unlock it and leave the key at home to go out.
View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
Easy to hang and wind resistant. Very good.
I use this Repeater on my CT110 HUNTER CUB and GB250 CLUBMAN. It is my favorite.
I bought it last year when I bought a CT110 HUNTER CUB, because I was planning to add a front carrier and a RODCarrier to it. I am sure it will be a good reference for those who are considering purchasing it.
The front carrier is made of DRC, the largest class, and is fixed at the most forward position, so the front of the handlebar is considerably longer than in NORMAL, The height of the LeftFront section of the Rear Carrier is 10cm higher than the Seat. The lower part of the front wheel and Quantity:Pair (for Left and Right) As you can see in the photo, I can close the RearFastener to the very bottom, even with the bottom rope tightened quite a bit. I live in an area that is occasionally exposed to strong winds, and the Seat has never rolled up.
Also, I have been using it for over a year now and it has not deteriorated much. (There is a short period of time when the parking Space is in direct sunlight.) Not much dirt on it. (It has a roof, so it is virtually dry even in the rain.) and I have never washed the surface with water. I am very satisfied.
I bought it for GB250 CLUBMAN almost one year after CT110 HUNTER CUB. It is rather a little bit large, so the front wheel lower part and the quantity of the front wheel are a little bit smaller than the original size.:Pair (for Left and Right) The Adjuster rope at the bottom is fully squeezed. There is still room to spare, but not so much that it will flip up in the wind, so we are not worried at all.
Perhaps if it were exposed to rain and direct sunlight throughout the day, the evaluation of deterioration might change, but I cannot comment on that.
View detail
![Taffeta Motorcycle Cover with Rear Box [TYPE1]](https://img.webike-cdn.net/catalogue/images/124540/TBC-RB_1_TS.jpg)
It was a little Smallish.
I purchased the Z125PRO and needed a Cover.
Fortunately, we were able to place it under the roof, so we searched for an inexpensive product that would fit a vehicle with a top case, and we found this product.
As for the product, it is a thin item with no lining since it is a 2,500 yen item, as a matter of course. However, although it is thin, the fabric feels firm, and so far there has been no water seepage. There are no seams to worry about either. There are also holes to put U-locks, etc. through, a strap at the bottom of the center, a rubber strap under the front wheel, and an adjustable strap at the bottom of the rear wheel for tightening. I don't know how long it will last before it starts to deteriorate, but I think it is a well-made product for the price.
Unfortunately, the top case was too large, or maybe it was because the rear carrier was raised, but it was a little short and did not cover the lower part of the car body. Although it could be placed under the roof for the time being, there was no depth under the roof, so the rear part of the car body was exposed to rain. Nevertheless, there is too much space below from the center to the rear wheels, which would allow rainwater to enter the carriers as it bounces off the ground.
It is a decent and cosmetic product for the price, but those who are looking for high Level durability and protection from water and dust may want to make another choice.
I regret that the size was too small. Because I have no choice, I think I will buy TYPE2 which is One sizeLarge.
View detail
Fits: Others Universal, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUBC125, HONDA CROSS CUB50, HONDA BENLY50, HONDA BENLY50110, HONDA glom, HONDA MONKEY125, HONDA DAX125, HONDA LEAD50, HONDA LEAD 90, HONDA LEAD 100, HONDA LEAD110, HONDA LEADEX, HONDA APE 50, HONDA APE 100, HONDA DIOCesta, HONDA XR50 MOTARD, HONDA XR100MOTARD
Exactly to MONKEYGROM
It is Exactly for 125cc Minimoto. It is thick, waterproof, and will not fade. It is quick to hang, and the center clip prevents flapping, even in strong winds.
The holes for locks on the front and back are also well and not frayed.
The black color is inconspicuous at night and plays a role in security.
View detail
Fits: SUZUKI Address50, SUZUKI AddressV110, SUZUKI Basket, SUZUKI LETS, YAMAHA VINO, YAMAHA JOG, HONDA dunk, HONDA glom, HONDA TACT, HONDA Giorno, HONDA DIO, KAWASAKI Z125PRO, KAWASAKI KSR-1, SUZUKI BIRDIE, SUZUKI VECSTAR150, SUZUKI VECSTAR125, SUZUKI ADDRESS110, SUZUKI ADDRESS V50
Protective Cover
I am worried that it will melt in the Exhaust System, so I let it cool for a while before using it. Does anyone know if it will not melt or not? View detail
Satisfied with thickness and sturdiness
I have just started using it, and although it is heavy, it feels sturdy, the keys are quiet, it has a dustproof function, and the length is just right. View detail
Fits: SUZUKI Address50, SUZUKI AddressV110, SUZUKI Basket, SUZUKI LETS, YAMAHA VINO, YAMAHA JOG, HONDA dunk, HONDA glom, HONDA TACT, HONDA Giorno, HONDA DIO, KAWASAKI Z125PRO, KAWASAKI KSR-1, SUZUKI BIRDIE, SUZUKI VECSTAR150, SUZUKI VECSTAR125, SUZUKI ADDRESS110, SUZUKI ADDRESS V50
just plain unsatisfactory
This time, due to various circumstances, we gave up our liter SS and purchased a new GROM after a Hara 2Scooter.
It is my first new car in about 16 years, and although it has a roof, I have to park it in a place where it is almost exposed to the rain, so I decided to buy a Cover first and foremost!
When I put the cover on, it doesn't fit well. I think the height of the Mirror and parking with the Handlebar turned off are not taken into consideration.
Even with very careful Cover, the slightest breeze would roll it up to the Front Fender (I reapplied it this morning, but it was rolled up before noon).
It also has a Belt at the bottom to prevent flapping, but the Belt was not threaded through the Male side of the Buckle.
We are in the process of applying for a conformity warranty, but will replace it even if the application is not approved.
If your application is not approved, you are throwing away Gold. I definitely do not recommend it.
View detail
Fits: YAMAHA YZF-R25, SUZUKI Hayabusa, SUZUKI GSX-S750, SUZUKI SV650X, SUZUKI Gixxer 250, SUZUKI V-STROM250, KAWASAKI Z900RS, KAWASAKI ZX-10RR, KAWASAKI Z650, KAWASAKI Ninja250, KAWASAKI W800, YAMAHA YZF-R3, YAMAHA Tenere700, YAMAHA XSR700, YAMAHA SR400, YAMAHA TRACER900, HONDA rebel1100, HONDA VFR800F, HONDA CB1100, HONDA CRF250 RALLY
It is compact and practical.
It is small in size and easy to carry.
If you park outdoors during a long-distance tour, dew will form in the morning and the sheets will often get wet.
Especially in the spring, when pollen gets mixed in and gets messy, it can be really useful.
Lastly, since the material is thin, it is easy to fold and store. -------------------------------------------------- -------- It is small in size and easy to carry. If you park outdoors during a long-distance tour, dew will form in the morning and the sheets will often get wet. Especially in the spring, when pollen gets mixed in and gets messy, it can be really useful. Lastly, because the material is thin, it is easy to fold and store. Powered by Google Translator
View detail
It's cheap, so it's good.
I purchased this for a DL1000 V-STROM 800 vehicle with Rear box.
I have the impression that the sewing quality is not so good and the fabric is thin, so I am concerned about its durability, but since it is inexpensive, I will use it as if it were a consumable item.
Although it has a buckle for wind protection, it cannot be tightened until it is firmly attached to the body, so it will flap around. This is a cause of concern, as it can lead to body wounding.
View detail
![MCP High Spec Bike Cover《Bike Guard》 [LL]](https://img.webike-cdn.net/catalogue/images/43895/MBC005_01_TS.jpg)
Fits: BMW K1300 S, BMW F800 S, BMW K1300 R, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA XSR900, YAMAHA YZF-R1, YAMAHA YZF-R250, YAMAHA YZF-R3, YAMAHA YZF-R6, HONDA CBR650 F, HONDA CTX700, HONDA CTX700 N, HONDA NC700 S, HONDA NC700 X, HONDA NC750 X, HONDA NC750 S, HONDA PS250, HONDA VARADERO 125, HONDA VFR1200 F
I like the texture.
CB1300SF, LLSize is just right, Spec. is a little different, but I bought Repeat of the same product. The front and rear tires are also hidden to the bottom. The holes for the front and rear tire locks are thick enough to fit. The back is now black so it is easier to put on. The fabric is thick and durable. The one I used before could be used for 4 or 5 years, but I can't put it on while the exhaust system is hot, so I put on the small one after an hour. I have used other manufacturer's products, but I want to keep my Motorcycle in Large size, so I think I will repeat this next time. View detail
First time security products
I was not sure which security device to use for my first motorcycle, but I found it convenient to use only one key to unlock the lock, so I bought it. I thought it would be a better product if both the Chain and U-shaped Lock had a buffer material that could be moved where it meets the wheel. View detail
Fits: YAMAHA XSR900, YAMAHA XSR700, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-10, YAMAHA MT-01, YAMAHA FZ8, YAMAHA FZ-1, YAMAHA FZ-1N, YAMAHA XJ6N, YAMAHA XJR400, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA TDM850, YAMAHA TDM900, YAMAHA WR250R, YAMAHA WR250X, YAMAHA SEROW250, YAMAHA DS250, YAMAHA SR400
Use of domestic high performance Material!
I bought this Motorcycle Cover for my SR400 for fun. I bought this Motorcycle Cover because I bought an SR400 to play with and I bought this Motorcycle Cover! Also, the rainproof performance is high and it is hard to be flooded! The price is expensive, but the quality is satisfactory and of a high standard! View detail
It is a defense against all odds.
Chain locks between Wheels or between front wheel and Center Stand.
U-Lock is used for outings.
Chain is difficult to load and can be used at home.
It is unlikely to be destroyed by bolt cutter, and I think it is as defensible as military standard.
View detail
Convenient to install Disc Lock on the vehicle without burden to the body.
I would like to carry a Disc Lock with Alarm to protect against theft while on the road, but I don't want to carry it in my backpack or HolsterBack because the Disc Lock is so heavy.
Also, since I ride a naked motorcycle and did not want to use a Seat bag or Tank Bag just for this purpose, I chose this Holder which allows me to secure the Disc Lock to the vehicle body.
This Holder is designed to be attached to the Handlebar, but I didn't want to make too much noise by attaching this and that around the Handlebar, so I attached it to the Tandem FootpegBracket.
I am satisfied with the ease of use.
View detail
Stable quality
The quality is stable and the cosmetics are good.
I have used it for almost 10 years and it has served me well.
It protected Motorcycle, which was parked under the eaves, for many years.
View detail
![Camouflage Pattern Bike Cover [LL]](https://img.webike-cdn.net/catalogue/images/102051/IMO9230-04_TS.jpg)
Fits: YAMAHA tricker, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA YBR250, YAMAHA TZR250R, YAMAHA SRX250, YAMAHA RZ250R, SUZUKI Bandid 400, SUZUKI Bandid 250, SUZUKI glass tracker, SUZUKI wolf, SUZUKI ST250E, SUZUKI RGV25O Gamma, SUZUKI GSX250S Katana, KTM 390 Duke., KTM 200 dukes, KTM 125 dukes, KAWASAKI Zephyr 400, KAWASAKI Australia, New Zealand and the United States, KAWASAKI ZZR250
It was a little small.
[How is it used?
I purchased this product because the Cover I was using had deteriorated and torn.
It is used in a covered parking lot for dust protection and anti-theft purposes.
Was the one you received as per Image?
Yes
I think it is solid for the low price.
Was the installation difficult?
It is difficult to discern the front and back.
How was your experience with it?
I looked at the size chart and purchased the size listed for my car model, but it was a little small.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I thought it would be nice to have a Mark or Line that could be used as a landmark so that it would be easier to see the front and back.
View detail
![TAKUMI Motorcycle Cover Ver.2 [LL]](https://img.webike-cdn.net/catalogue/images/21036/photo1_TS.jpg)
Fits: BUELL S3, KAWASAKI GPZ1100F, KAWASAKI GPZ750F, KAWASAKI Z800, KAWASAKI Z750, KAWASAKI Z1000, KAWASAKI W800, KAWASAKI W650, KAWASAKI W400, KAWASAKI H2SXSE+, KAWASAKI GPZ750, KAWASAKI GPZ1100, HONDA VTR1000F, HONDA VFR800, HONDA VFR1200, HONDA RVF750K, HONDA RVF750, HONDA NC700S, HONDA CBR1100XX, HONDA CBR1000F
I purchased the Motorcycle Cover because it was out of date.
The handling is very easy and the double structure is very good for a Full Cowl Motorcycle Cover.
Also, GSX1300R HAYABUSA (Type 2) I was able to install the Cover with the GIVI Top Case Bracket still in place.
View detail
Fits: HONDA CR125R, HONDA CRF150R, HONDA XLR200R, HONDA MTX200RII, HONDA XR230, HONDA FTR223D, HONDA FTR, HONDA SL230, HONDA XR250R, HONDA XR250 BAJA, HONDA XR250 MOTARD, HONDA XR250, HONDA XLR250R, HONDA XLR250RH, HONDA XLR250RF, HONDA FTR250, HONDA CRM250AR, HONDA CRM250, HONDA CRM250, HONDA CRM250R
Exactly to MOTARD as well.
Bought this for my drz400. For a long time, I had been wearing the one for my previous Large Motorcycle, but it was not so good because it was too loose. This time I bought it because it said "for Off-Road" and I am satisfied with the just fit. I also like that the lower part can be closed with a string. View detail
Fits: YAMAHA YZF-R25, SUZUKI Hayabusa, SUZUKI GSX-S750, SUZUKI SV650X, SUZUKI Gixxer 250, SUZUKI V-STROM250, KAWASAKI Z900RS, KAWASAKI ZX-10RR, KAWASAKI Z650, KAWASAKI Ninja250, KAWASAKI W800, YAMAHA YZF-R3, YAMAHA Tenere700, YAMAHA XSR700, YAMAHA SR400, YAMAHA TRACER900, HONDA rebel1100, HONDA VFR800F, HONDA CB1100, HONDA CRF250 RALLY
Essentials for Overnight Touring
Lost my HalfCover that I used for 6 years last year on a touring trip, and purchased this product because the previous one, a necessity in case of open-air touring, was discontinued.
As I had expected, I will use it without the Pannier case, although the width of the Rear is not enough for Shinobu Sen with the Pannier case attached.
The half has a string fastener at the center and a quantity fastener closer to the rear.:Pair (for Left and Right) It has a D-ring in one place. I think you need to prepare a clasp.
The fabric is thin, lightweight, and easy to handle.
View detail