![icon-webike.png](https://thimg-afcc.kxcdn.com/@wth-shop/assets/desktop/img/icon-webike.png)
Reviews
![Motorcycle Drive Recorder EDR-11 Α Series](https://img.webike-cdn.net/catalogue/images/105168/edr-11a_TS.jpg)
Simple.
Although 2Camera (front and rear) has become the norm for Motorcycle, we chose Front's 1CameraType.
I decided to go with 1Camera because the rear wiring is troublesome, and the 2CameraType's rear image quality is reduced, which is good for preventing agitation, but not really necessary.
Since 2Camera costs about 35,000 yen, just 1Camera is better than nothing.
I usually use an IPhone, but I couldn't connect to the app and couldn't tell if it was working or not, so I guess I made a mistake...
So I connected with Android and was able to see it (laughs).
View detail
![Twin Dashboard Camera](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0283/24092252_1_TS.jpg)
DriveRecorder for quality
Balance between price and performance (LED signals, nighttime images, front/rear shots, angle of view, etc.).
We chose this product based on our consideration.
Durability is undecided as we have just started using it.
View detail
![Bracket for Drive Recorder Front Camera](https://img.webike-cdn.net/catalogue/images/126647/304-5191F_TS.jpg)
Used for Radar installation
It is necessary to remove the Mirror until the Meter is removed.
I thought it would be easy, but it was more complicated than I thought.
View detail
![Motorcycle Drive Recorder "MiVue(R) M820WD" with GPS [Drive Recorder]](https://img.webike-cdn.net/catalogue/images/133556/25864484driverecoder_TS.jpg)
Very good.
Motard bikes do not have space to store the body, and I was concerned about the large size of the body. I chose this model because the body is small and the connecting cable is SMART and thin.
I was very anxious about the purchase, but I was able to install it without any problems, and I am glad that I was able to use the included double-sided tape and tie wrap instead of using a bracket.
View detail
Thin but rigid.
Plate itself is thin but rigid.
It is very helpful that a Bolt for fixing the Camera on the DriveRecorder is also included!
Installation of the bracket itself is very easy as it is co-tightened with the License Plate.
View detail
![Motorcycle Drive Recorder EDR-22 Series with GPS](https://img.webike-cdn.net/catalogue/images/103484/edr-22g_001_TS.jpg)
Trusted Mistuba
[How is it used?
Mainly used for touring
Was the one you received as per Image?
Street Image
How was your experience with it?
I chose this MITSUBA product because of its compact body and reliability in case of emergency, but the Camera is the latest. (Equipped with STARVIS) I am a little dissatisfied with the fact that it is not. However, the recorded picture quality is fine.
[Points to note]
Since the Body is Compact, I don't think there will be any trouble mounting it.
How did it compare to other products?
We compared it with DAYTONA's M820WD, but there was no decisive advantage and we chose it because of the manufacturer's preference.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Not suitable for AIO-5Camera installation
[How is it used?
Used for AIO-5 Camera
Was the one you received as per Image?
As pictured
Was the installation difficult?
The installation itself is just a matter of removing the License Plate and inserting it.
It was used for the Camera of AIO-5, but the position width of the Bracket hole of Camera is different, so drilling is necessary to fix the Bolt.
Double-sided tape can be used for pasting, but the width is a little large and the depth is a little small.
Bolt length is not enough when using Double-sided Tape
It would be nice if it comes with a longer Bolt.
How was your experience with it?
No problem
[Included Parts:were they on?
Bolt, Nut, Washer included
[Was there anything that disappointed you?
None
View detail
![Short Arm](https://img.webike-cdn.net/catalogue/images/104887/RAM-B-201U-A_1_TS.jpg)
Lightweight Compact
I had been using an ordinary ram-mounted Arm, but when I transplanted it to the FairingBracket from its previous mount on the Handlebar, the length of the Arm became an obstacle to handling, and because it was heavy, the angle of the Arm sometimes changed due to vibration or shock. The length of the Arm was an obstacle to its handling.
That is why we changed to a short arm. The short arm is lighter than the short arm, and it also reduces the load on the base.
View detail
![Motorcycle Drive Recorder "MiVue(R) M820WD" with GPS [Drive Recorder]](https://img.webike-cdn.net/catalogue/images/127584/40860_TS.jpg)
The installation was Large strange, but I am satisfied.
Because of ADV160, it takes time to detach Cowl and handle Wiring.
It took almost a day, but the images are beautiful.
The Bluetooth connection was also not bad.
If possible, we hope that it will not have to be used to verify the accident.
View detail
![Short Arm](https://img.webike-cdn.net/catalogue/images/104887/RAM-B-201U-A_1_TS.jpg)
If there is no reason, this" is" good.
[How is it used?
About 7 years and 70,000 km
XGrip for Smartphone to attach Smartphone and DVR
Mounting points are around the handlebar
Was the one you received as per Image?
Simple package, somewhat rough product as per Image. I would like to say that it is heavy, but it is heavier than I had imagined from the fact that I had heard that it was made of aluminum and from the appearance of its small size.
Was the installation difficult?
The OEM Knob is simply loosened, inserted, and tightened.
If theft is a concern, SecurityKnob is available, but it is a bit bulky.
It is possible to use an Inch size nut to secure the Merit, which can be loosened and angled without the need for tools (use the nut for installation. (Use the Nut for installation, but do not over-tighten it.)
How was your experience with it?
Compared to the standard arm (https://www.webike.net/sd/21313050/) and long arm (https://www.webike.net/sd/21313048/), there is no Spring inside, but it has not come loose or come off.
Since it is the shortest Arm, I thought it would be the least likely to cause a sense of mess when attached around the Handlebar. The support length is also shorter, so it is somewhat safer.
The short length of the cable makes it less flexible. However, the position of Charger was originally taken into consideration, so there is no particular impact.
The lightest Arm components except for those with different materials
[Included Parts:were they on?
No particular product only.
[Was there anything that disappointed you?
Nothing special. If I had to say, it would be nice if Bolt wasmm Size, but there is no problem if you don't change it from the original parts.
Quantity:If you want to buy this product, you need to purchase it from RoseRose because the Set comes with a standard arm, but unless you need a standard or long arm for height or position reasons, I feel that this product is the one to choose if you are looking for lightness.
View detail
![Attached Base](https://img.webike-cdn.net/catalogue/images/59687/rap-b-378u_01_TS.jpg)
I didn't use it right.
It was attached to a steel Fuel Tank and used as a base for a Phone Holder, but when running on a day with a high of 40-Degrees, it tore from the border of the inner Gold genus. It seems that the heat softened it and it could no longer support the weight.
"Must be used indoors/inside a vehicle." I'm not complaining because I used it on an unusually hot day when it says, "I'm not complaining, but just FYI.
View detail
![MiVue (R) M820WD Motorcycle Dedicated Drive Recorder](https://img.webike-cdn.net/catalogue/images/127584/40860_TS.jpg)
TimePlus is fun!
Image quality (default 58 fps) is fair
The daytime image quality Number can barely recognize all letters before and after the stop, and 4-digit numbers at the back of the second unit of Right.
When you start driving, you can recognize 4-digit numbers even in the front and back.
One point, I would like to add that there are three picture quality settings:58fps, HDR, and HDR.
1080p/58fps、1080p/29fps、HDR1080p/29fps
Motorcycle is not good for drareco
Yamaha・XG250 TRICKER
I can't compare the picture quality because it's my first driver's camera, but I felt the picture quality wasn't as good as I thought it would be.
There may be a single-cylinder effect and a problem with the location of the installation.
The app is a little unstable, but useful.
The high quality MODE of 1min1File58fps is 100MB, and the DOWNLOAD feels quicker at about 7 seconds.
I think it is easy to use (although I don't know about other apps) because it also shows map and speed during video playback and the own car Pin works.
However, when I tried to play and DL other files, the Wi-Fi connection was broken, etc. It seemed a little unstable.
The SDCard is screwed into the Plus, so it is good to be able to watch videos without the need to remove the SD card.
・TimePlus
The 1 hour and 15 minute run was combined into one video of approximately 5 minutes and 350 MB.
The video is one File per minute (default value) and the GPS on the map is only that section, but
With TimePlus, the entire driving route is displayed, making it easy to look back and enjoy looking back.
View detail
![Mirror Bracket for M777D Front Camera](https://img.webike-cdn.net/catalogue/images/87532/20052_TS.jpg)
Convenient to have!
I could not find a good place to mount it, so I bought a Mirror mount because it was EXACTLY what I wanted. As a result, it was Exactly!
I was able to install it without any problems, but I am only worried about theft.
The screws are dedicated to prevent theft, but if the Bracket is broken or the Mirror is removed, it is the end of the world.
I would rather be able to take it off and on easily, so I can carry it with me.
So, I am Covering as a self defense.
View detail
![BS-9b Dashboard Recorder](https://img.webike-cdn.net/catalogue/images/113338/pro_photo_9b_TS.jpg)
Excellent "point to take with "Motorcycle
[How is it used?
...from approximately December 17, 2022 to September 21, 2023, inclusive.
Base is attached to the helmet using the included double-sided tape mount.
Was the one you received as per Image?
As shown in the image, as shown in the Image.
The previous generation:Bs-8a (https://www.webike.net/sd/23562886/) looks almost the same, for better or worse.
How was your experience with it?
The signal is almost always visible while it is on the screen with no problems at all, giving a sense of security. Also, the image quality is clear enough to be recognized.
The battery can also be recorded at all times while running from morning to night, except during breaks. However, if you run until nighttime, it is safer to charge the battery somewhere during breaks.
USB TypeCCable is used for charging, but it is not recognized if both ends are CCable, and USB-A is required for the One Side. In short, a cable that can charge B+COM SB6X is acceptable.
The Magnet base is a Strap that prevents falling off, but falling while driving has not occurred since the previous generation.
Because it is mounted on a helmet, it has the advantage of being able to take pictures in the direction it is facing, unlike vehicle-mounted systems.
To mount on Helmet, if the driving posture changes between motivated and unmotivated, the angle must be readjusted or only the sky will fit in the angle of view.
Because it is mounted on a helmet, the Image is easy to record against a four-wheeled vehicle that will bury the Motorcycle in a single blow.
The file is recorded on a microSDCard, but the internal file can be viewed on a Smartphone (Google Pixel 7 Pro) by using a type-CAdapter from USB-A while the SDCard is inserted in the body.
The sound and vibration notifies the user when the device is activated and when it is closed, so the user does not have to worry even if the Body is not visible from the mounting position.
I felt evolution from the previous generation because various settings can be made only with Body by long-press activation.
Mysterious blinking function added to Light, but not yet used.
Body weight is not light, but I don't think I feel a tilt in the center of gravity or directly related to fatigue when running around with it on Helmet.
[Points to note]
Although the body has evolved, with settings now possible only on the body and the charging terminal changed to type-C, the parts described in the previous generation's Impreza (https://imp.webike.net/article/414070/) remain unchanged.
The round part connecting the rubber cover on the back to the body is still too thin, and even though I had recognized it, I tore it off the first time. However, the rubber cover itself is too tight and does not come off unexpectedly.
The screws on the mounting base were re-tightened and hardened with Aron Alpha. The tightness of the screws determines the fixation of the body, so if the screws are tightened too much, it will be impossible to change the angle of the body.
How did it compare to other products?
Despite the weight of the Body, we felt that in many cases this product was superior in terms of continuous shooting time.
The image quality is beautiful, but if you want to keep a record of your touring and conversations at Income, I thought it would be easier to use SENA, which is integrated with CameraIncome.
In exchange for its weight, this product boasts a long recording time. Although we have not been able to evaluate the durability of the product, we believe that it is highly durable, as Base is used in Japan where the equipment is running around and waiting for prey without regard to the season or weather.
On the other hand, except for the Body, all the shortcomings of the previous generation have been carried over, including the giving up of the possibility of seeing no evolution except for the Body.
View detail
![Motorcycle Drive Recorder EDR-21 Α Series Model with GPS](https://img.webike-cdn.net/catalogue/images/91097/gwqa_TS.jpg)
Fits: Others
It takes a long time to watch a video.
This is attached to VSTROM1050XT.
It is equipped in case of emergency.
I thought it would be a two birds with one stone to also check my daily Riding, but I think I will only check the video when I have an accident because it takes a long time to download to watch the video and it is a lot of hassle.
Installation is no problem at all if you have the general knowledge and ordinary skill to disassemble the exterior and have electrical tools.
View detail
![Standard Arm](https://img.webike-cdn.net/catalogue/images/59687/ram-b-201u_01_TS.jpg)
It's easy to use, but it's a Large size.
[How is it used?
I purchased this to mount my Gopro.
Was the one you received as per Image?
It is standard, but quite longer than the Image.
And it is quite heavy.
Was the installation difficult?
It is easy to use because you just turn the handle to loosen it and insert the ball into the loosened part. However, when I loosened the Dial too much and it came off, parts were scattered.
Please be careful not to loosen it too much.
How was your experience with it?
It is long but easy to use because of its flexibility.
[Included Parts:were they on?
Instruction Manual。
[Was there anything that disappointed you?
I wish it was a little lighter and Compact. It's a bit tough on the half side, so which would you take?
View detail
![GoPro Mount](https://img.webike-cdn.net/catalogue/images/59687/rap-b-202u-gop1_01_TS.jpg)
Usability is good
[How is it used?
RamMount for GoproCamera shooting on Fat bar's Road motorcycle.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
It is attached in the same way as a normal go-promount, so it is simply attached with screws.
How was your experience with it?
With other GoproMounts, the height was not high enough for the handlebar, and it was hard to see the front of the camera.
The RamMount has a standard setting and was easy to install without having to think about how to install it.
[Included Parts:were they on?
As shown in the image.
[Was there anything that disappointed you?
Neck is a bit pricey, but it is easy to use.
View detail
![Motorcycle Drive Recorder EDR-21 Α Series Model with GPS](https://img.webike-cdn.net/catalogue/images/91097/gwqa_TS.jpg)
Fits: Others
Mistuba Sankowa Motorcycle DriveRecorder - EDR-21α (GPS)
It is made by a Japanese manufacturer.
Well-made and secure.
View detail
![DrivePro 20](https://img.webike-cdn.net/catalogue/images/99977/Pp_DP20-4_TS.jpg)
Helmet mount reconsidered
[addendum].
I was pondering how to mount it on the helmet, but when I checked the body weight, I found that drivepro20 was slightly heavier than DDR-S100. I did not check enough.
If the simple bracket included with the drivepro20 is attached to the helmet, the weight of the drivepro20, including the bracket, will be slightly lighter than that of the DDR-S100 attached to the helmet, but the level of weight will be almost the same. However, the Level is likely to be almost the same.
I was disappointed because I was thinking of something lightweight in consideration of the burden on my neck. It is inevitable because I did not check enough. For the time being, I would like to use it attached to the car body.
View detail
![DrivePro 20](https://img.webike-cdn.net/catalogue/images/99977/Pp_DP20-4_TS.jpg)
For HelmetCamera.
I bought it because the DAYTONA DDR-S100 I was using for Front was going bad.
When I first purchased the DDR-S100, I used it attached to my helmet, but after a long ride such as a touring trip, the weight and air resistance made it hard on my neck and shoulders, and sometimes left me with fatigue the next day or later, so I changed to using it attached to the car body. However, since I have a cheap CHINA 2-Camera DriveRecorder attached to the body, I wanted to use a sub-camera attached to the helmet if possible.
The conditions for purchase were:reliability to work properly in case of emergency, high image quality so that the number of vehicles passing nearby can be read, and small type lightweight so that it can be easily operated even when attached to a helmet, The candidates were Transcend's drivepro20 and DAYTONA's M777D.
In terms of price, drivepro20 can be purchased at a lower price, but M777D comes with RearCamera. Both cameras have the same built-in Sony STARVIS for image quality, but the M777D has a brightness of f1.8 while the drivepro20 has a brightness of f2.8. Other, M777D does not have GSensor, and drivepro20 can be used while charging, but it does not have a waterproof charging cord. After comparison, we found that the M777D is inexpensive, the RearCamera is not necessary because we intend to use it attached to the helmet, the Lens can tolerate a little darkness because we rarely ride at night, the GSensor is better, and the DAYTONA has difficulty connecting to the iPhone and Wi-Fi, I chose drivepro20 for the following reasons:DAYTONA is difficult to connect to iPhone and Wi-Fi, there is information that settings cannot be made from the app, and waterproof seems to be manageable with some ingenuity.
I installed drivepro20 on my vehicle and used it for an early morning ride. Since I was in the neighborhood, I used the drivepro20 on battery power, and it ran on battery power for less than 2 hours. Of course, I was able to record without any problems, the picture quality was as expected, and the brightness was a little dark as expected.
The bad thing is that GSensor seems to be quite sensitive, and even with the setting set to Low, it reacts to the slightest vibration, causing the camera to record Events. I think it might be robust enough for helmet mount (Large), but I think it is necessary to turn off GSensor when installing it on a car body. Also, as I knew in advance, it is not activated when the power is turned on like a normal DriveRecorder, but it needs to be activated by switch operation, so you need to be careful not to forget to turn on the switch.
For use while supplying power, I purchased an additional OptionPower Cord for the M777D and used the outer cap part to make a waterproof cable. I would like you to sell WaterproofCable as an option since it is possible to use it while supplying power to the device.
I am now considering how to attach it to the helmet, and I expect that it will work as intended since it is much smaller and lighter than the DDR-S100.
View detail