Reviews
ease of use
I purchased this for mounting a Camera on my Motorcycle using Ram Mount Parts.
The mounting is no problem, but it is troublesome to adjust the position and angle of the Camera for attaching and detaching the Camera because of the screw tightening only, so a quick release mounting is attached to the CameraAdapter.
View detail
SOTO PT-14SBCR Poke Torch Purchased in conjunction with
SOTO PT-14SBCR Poke Torch Purchased in conjunction with the
I thought that a regular lighter sold at Convenience or other places would be fine, but I still bought it with the thrusting spirit of wanting to use it OEM at first.
This is not a comparison review as I have not compared it to other lighters, but it works fine with the Poke Torch.
Since the product is not that expensive, I think I will place a regular order with Timing for WeBig purchases.
If it is difficult to ignite, extend the length of the wick to make it easier to light.
*Can be used as a lighter as it is.
View detail
Fits: Others , DUCATI SS900, KAWASAKI W800, SUZUKI V STROM250SX
Just the right Size!
It is just the right size to hold my smalls, change of clothes, water bottle, snacks, etc. ?I like the way it is made and the quality of the product. It is well made and I like it ? View detail
I am satisfied with it, but there are some points that may bother some people.
I purchased the initial lot and installed it on the same day, and use it every weekend for day-touring. I originally used a smartphone Holder, but found the following points inconvenient, so I purchased this SMARTMonitor.
It is a hassle to take the phone on and off every time you get in and out of the car, especially when you stop for a short while at a convenience store.
It can't be used in the rain (it's a notebook case, so it gets wet, and USB charging from Motorcycle is likely to be shorted).
・Heat makes the phone behave strangely during extreme heat.
The phone holder that can be mounted even in a pocketbook case is too bulky and cluttered around the handlebar.
When a phone call comes in while driving, the Sleep screen appears and Navigation cannot be viewed.
The proportion of parts that are not functions of the product itself (DFS for the application of the Radio Law (60-second wait for connection), Android Auto's characteristics, and performance) is large, but I will write my impressions when I put them together and consider them as a single product.
Elimination of inconvenience points
I→m still not sure how it behaves in extreme heat, but I have almost eliminated it.
Comfort of use
→ no problem but with the following caveats
Points to note
Touch with→Gloves is not very responsive, so Touch pan is required (or TradeOff, since it didn't malfunction even with considerable rain?)
→Brightness switching may be dependent on the phone side, or it may be set to nighttime MODE even in the daytime, or daytime MODE even in the middle of the night.
→After DFS is completed, it takes a long time to connect to my phone. after DFS is completed, it goes to WiFi connection, but it connects after repeating device search, Home screen, device search 2 or 3 times (1 or 2 minutes during this time). is it compatible with my phone?
→ The screen rendering is choppy. I don't use it for Video or Game, so it doesn't affect my use, but if you're used to the slippery crispness of a smartphone, that? If you are used to the smoothness and crispness of a smartphone, you may think, "What the hell?
→And Lloyd Auto is limited in what it can do due to many restrictions.
If you don't check it beforehand, you may be surprised at how little you can do if you use it like MirrorRingMonitor on your smartphone.
Overall, I am satisfied with the price because I was able to solve the inconvenience I had expected at this price, but I think I might have been disappointed if I had purchased the product without much research.
View detail
Mounted on CROSSCUB110 JA60
Note that the Main zipper portion is waterproof, but the Others are non-waterproof.
Puncture RepairQuantity:Set, rain gear, Inflator, and folding chairs are always in the bag and have more storage and comfort.
View detail
It's so easy to use.
The SeatBack and Side Back that I used to use were of the type where the Seat is removed and the Support belt is attached, so I used the ETCCard as a Quantity.:I was having trouble with the belt gapping when I set it, but the product I purchased does not require such problems, and it is securely fastened and does not gap at all when breaking.
it's the best
View detail
I liked it.
Installation and removal are excellent.
Is the rigidity a little weak, perhaps because it is designed to be lightweight?
View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR SP, HONDA NC750X, HONDA CB1300SUPER FOUR, Others , HONDA CBR650R, HONDA CB1000R, SUZUKI V STROM250SX
Great for touring up to medium distances.
The RainCover was also included, which was a nice touch. View detail
Reliable Brand
Purchased due to the addition of a Large Motorcycle.
We use Chinese STAND for 125 and 400 Class Motorcycles and this one for Large Motorcycles.
With Chinese STAND, the STANDBODY is distorted by the weight of the car body when it is lifted up, but this product can be lifted up stably without any problem at all.
If I had to make a request, I would say that protective parts should be attached to the pipe that touches the ground when lifting up, otherwise the STAND will become wound wound.
View detail
Large doubles as Small
Boxes used so far
Mono-lock case [E43NTL-ADV]
It is good because there is plenty of room in terms of capacity, but the closing operation is cumbersome until you get used to it.
It was Stress every time, every time.
Mono-lock case [B32NB-ADV]
The closing motion was easy as I just closed the lid.
Top box 35L, compatible with Honda OEM and Smart key
Although Merit is that only one Smart key is needed.
The inside of the box has a lot of protruding parts, and perhaps because of its shape, it is necessary to consider the direction of the Helmet when storing it.
I had only used it for 2 months, but Stress was more Large.
That's where I found this B45+ this time.
Well, certainly Large
I think it looks the worst from behind.
But I think the security of being able to fit a lot of luggage and the lack of Stress when using it is good.
Base plate is made of Wide (Sold separately) I feel more secure now that I have changed to
I don't know if it's because it's still new, but the Hinge part is stiff.
Much thinner and chubbier insoles than previous GIVI product insoles
Those are the two things I'm not happy about.
My request to Manufacturer would be to add a Pocket or something to hold the included Net in the corner or edge of the lid side!
View detail
Cospa best
It is easy to lock and the mounting strength is Firmly fixed, unmatched by other companies. View detail
Handlebar Lock is not possible.
Ignition and Seat Cylinder set.
I was able to purchase it at a reasonable price, but I was unable to lock the handlebar, which is the most important thing.
We took security measures in a different way.
View detail
Guardian bell
I bought it at Harley's Amulet and it looks cute and makes me feel like I'm wearing one point of reference. View detail
Fits: HONDA PCX160, HONDA PCX150, HONDA PCX125, HONDA PCX Hybrid, HONDA PCX e:HEV
If you want to put GIVITop case, this Carrier
Mounted on PCX JK05.Corresponds to all models. Some PCX models require modification, but JF81 and JK05 can be installed by removing the cover.
I bought it because I planned to install GIVI's Top case (Mono-lock) from the beginning.
It is Small and is the cheaper of the Carriers.
If you want to install GIVI's Top case, this is the CarrierRecommendation. You can even order it from authorized dealers.
View detail
Convenient to install Disc Lock on the vehicle without burden to the body.
I would like to carry a Disc Lock with Alarm to protect against theft while on the road, but I don't want to carry it in my backpack or HolsterBack because the Disc Lock is so heavy.
Also, since I ride a naked motorcycle and did not want to use a Seat bag or Tank Bag just for this purpose, I chose this Holder which allows me to secure the Disc Lock to the vehicle body.
This Holder is designed to be attached to the Handlebar, but I didn't want to make too much noise by attaching this and that around the Handlebar, so I attached it to the Tandem FootpegBracket.
I am satisfied with the ease of use.
View detail
Hook was not needed.
Used on GPZ900R. The large hooks are not suitable for motorcycles with hooks, but the large mesh of Rubber is the best choice. View detail
Recommendation for those who are anxious to draw a Maintenance Stand alone!
Although an instruction manual is included, it does not explain the details of how to assemble the unit, which was confusing at first. I would have liked to have a guide to the screw holes to be used for the approximate number of inch tiers.
There was a product video on how to use and assemble the product, so I checked it out and assembled it. The video was very helpful.
The NINJA1000's front tire (120/70Zr17) was firmly secured and stood on its own. It also felt stable when lowering the bike.
I used to do maintenance only with the Rear STAND, but when I lifted up the bike by myself, I didn't hang it properly and it fell over. I wish I had bought it before I stumbled...I would like to recommend this product especially to those who work alone to avoid damaging a large motorcycle.
View detail
Taste after 5 years of use.
It can be looped so it can be adapted to any Style.
The first is a bright Orange color.
The more it is used, the more natural the brown color becomes.
Button with Crimp on thick cowhide.
The key and Key Holder will not come off.
Motorcycle riders are looking for a product like this that is sturdy and won't scratch around the Stem.
I found a pretty good product.
View detail
Fits: SUZUKI Gixxer SF 250, HONDA CB1300SUPER BOLD'OR, HONDA NC750X, HONDA CB1300SUPER FOUR, HONDA CRF250RALLY, HONDA CB1300SUPER FOUR SP, HONDA CBR650R, YAMAHA MT-25, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR SP, HONDA CRF250RALLY S, SUZUKI Gixxer 150., KAWASAKI VERSYS-X 250 ABS(17) KLE250D, YAMAHA MT03, Others , SUZUKI V STROM250SX
I thought it would be good for day touring.
The quality looks good, but the capacity is smaller than the picture suggests. The capacity is enough for one day touring. View detail
Fits: KAWASAKI ELIMINATOR SE, KAWASAKI ELIMINATOR
expensive
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
Nothing to use, just Screw.
[Was there anything that disappointed you?
price
View detail