Reviews
Fits: HONDA Africa Twin Adventure Sports ES, HONDA Afriva Twin Adventure Sports, HONDA Africa Twin
Works outstanding!!
I was skeptical at first, but it fits perfectly and works great! Easy installation. I have the Honda CRF1100L Africa Twin 2021. View detail
Fits: HONDA Africa Twin Adventure Sports ES, HONDA Afriva Twin Adventure Sports, HONDA Africa Twin
AFT 1100 OEM Quick Shifter
Perfectlly working mainly from 2nd to above gears. 1st to 2nd still need some adjustment or skill improvement. Anyway very easy to install (detailed instructions) and configure. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Partially made of Steel, it is prone to rust.
[How is it used?
The Normal pedal was a bit tasteless, so it was attached to the Brake pedal version up.
Was the one you received as per Image?
The size was larger than expected and easy to step on.
Was the installation difficult?
Install the Normal brake pedal so that it is sandwiched between the Normal brake pedal.
Plus screw allows installation with a single Driver.
How was your experience with it?
The driving operation is easier because there is more area to step on.
However, it took some time to get used to it because of the slight increase in height.
[Included Parts:were they on?
Mounting Screws, Mounting Hardware, etc.
[Was there anything that disappointed you?
Body is Material:Aluminum, but the Plus screw and the bracket on the reverse side are rusted with steel. Especially when the Plus screw is rusted, it is difficult to remove it.
▼This is a common design, but you can enjoy a slightly Mischief atmosphere.
I think the discomfort during operation depends on the person.
View detail
![Twin Shock [Z Series] Z302](https://img.webike-cdn.net/catalogue/images/126055/116-21218010B_1_TS.jpg)
Come with heavier rated springs, preload adjusting collars, rebound adjusters and the looks
About quality and texture - The twin shocks from YSS are made from machined billet aluminium featuring an all black anodized surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - This rear suspension features a spring rate that is specific for a weight range which makes it simple to choose from the two options available. Obviously way better then the original units with there heavier rated springs, preload adjusting collars, rebound adjusters and the looks when fitted to any of the coloured Monkey 125 give that custom appearance. Products to buy together - The suspension on the Monkey 125 would have to be the worst part of this mini moto, so after the purchasing of this quality rear suspension the essential product to purchase to complete your suspension upgrade would be the YSS fork damper kit that can by purchased via the non-listed item quotation here on Webike. Difficulty of installation - The installation of the twin shocks is a simple task that took 0.5 of an hour to complete. Mechanical aptitude and the use of basic hand tools is what is required to secure the rear suspension between the frame and the swingarm. Cost performance and comparison with other products - I find the cost of all the products YSS sell to be on par when compared to what most other companies sell their products for and the twin shocks are no different. About shipping and packaging - With there being no option for sea freight or EMS for the twin shocks, I had to chose FEDEX which is priced higher then I like to usually spend on shipping. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Lowdown
After much deliberation, I decided to go with EFFEX and it was the right choice.
Thanks to the fact that it is a little more than two centimeters lower, it will stick with sticky feet.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000GT, SUZUKI KATANA
I can work on it myself, but it's more difficult.
Link Plate was replaced while supporting the car body with Panda Jack using only Side Stand.
Both foot tongs are now attached up to the ball of the big toe and feel more secure.
Since the rear was lowered, the front fork also protruded 1.4 cm.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000GT, SUZUKI KATANA
EFFEX Lowdown Kit
Even 2cmDown makes quite a difference in the sense of security.
Quantity:I think Set's STAND is also sturdier and better made than OEM.
View detail
Focus on appearance
Shift sensation feels smoother.
The entry into Neutral does not change.
Custom parts that look more or less the same.
I think so.
View detail
With Down Type Exhaust System, you have to make a bracket.
Was the one you received as per Image? Better than Image.
Was the installation difficult? It is easy to install if you are a do-it-yourselfer.
[Was there anything that disappointed you?
The MORIWAKIDown Type Exhaust System does not allow the Bracket to be installed, so I lowered the Bracket so that it does not interfere with the Brake and made it myself.
View detail
Even if it's not a low-headed Bolt….
I purchased this to improve the hardness of the entry of Shift on my 2014 NINJA1000, which had been bothering me since I bought the car used.
Installation could be done without removing the Cowl, so it took only 5 minutes.
However, when installed with the supplied low head bolt, it does not interfere with the OEM change lever, but there is only a gap of about 1mm, which bothered me, so I installed a M6×10 button cap bolt with a lower head than the low head bolt to secure the gap.
Shift entry remains a little stiffer than before, and I feel that the shift feel has become tighter.
I wish it were a little cheaper because it is expensive for such small parts.
View detail
Nice simple solution
much better than using sealant or silicone if you forgot, like did, to fill the rim lock hole before installing tube and tire. Nice simple solution for plugging the extra hole when 2. rim locks are not used.Using these to plug the extra hole in a rim makes the job easier and looks like it came from the OEM. These may be little things, but it's the little things that count to finish a job correctly. View detail
Great product
Fits well View detail
tw200
[How is it used?
Touring
Was the one you received as per Image?
YES
Was the installation difficult?
Easy
How was your experience with it?
Very good
[Included Parts:were they on?
It was attached.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI ZZR1100 D, KAWASAKI ZZR1100 C, KAWASAKI ZX-10, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI GPZ1100 , KAWASAKI GPZ1000 RX
Black will not fit without shaving due to the thickness of the surface treatment.
I cleaned up the cist Shaft with Paper but it was too tight to fit, so I had to rub the Bearing Inner Ring with Paperetc. a lot to get it in, although not enough to drop the Plating.
The reason may be the thickness of the plating, since I purchased it in black, but after inserting it into the Shift shaft, it turned smoothly, so it may be due to a slight thickening and deformation of the splined area near the shaft due to processing distortion.
The bearing was also reluctant to move, but after placing it in the shift shaft, it rotated smoothly, so I decided that the bearing would rarely rotate and assembled it as it was.
It would be nice if the price was a little lower.
View detail
Genuine Puig Chain Tensioners (Adjusters) for BMW S1000RR 2017
I have not used the chain adjusters from Puig before but I have had a lot of use from other brands but decided to give these a chance. Finding the right ones for this specific bike was not tricky as I had already checked Puig website for the part number. Luckily, Webike did stock them for this bike so all was good. As I said before, I have had a lot of use from other brands like Lightech with great results but wanted to see for myself if these Puig ones are up to par with those. The price was a lot cheaper than the Lightech branded ones and this was also a plus point. With some other parts, I had them all shipped together via EMS and the order arrived in 5 days from being shipped. On arrival these were really well packaged even though they came in the Puig box. They are really well made and the anodising is flawless in the red colour I opted for. They are very well put together and the threaded section is super smooth. I do have to say, they look a lot like the other brands as the design is almost the same. I suppose there are only a few ways of manufacturing this kind of part anyway. Fitting is very straight forward and even a novice can fit them without issue. So the final result was excellent and I am very pleased with the Puig brand for this use. Will no doubt try them again on other bikes too. Thanks Webike View detail
Fits: HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub].
Formative Lantern CUB
The work is difficult! Special tools are required. If you don't have it, you can't do it! First, you need to remove the front wheel, then the front cushion, and then use a special tool called a spring compressor. I recommend the Straight Coil Spring Compressor for Motorcycle, which can be used on an AXIS light truck and an NVAN. I received this compressor as a prize from a magazine. I have been using it for more than 10 years. I have been using the NTB product Moldy gave me for 1000 yen before, but this time I had a chance to use this product. View detail
Has the Shift's entry been further improved?
I purchased this product for the purpose of further improving the shifting of my MONKEY125 (JB02). First of all, I would like to conclude that I am honestly not sure about it? I originally installed KITACO's Shift link, so I thought it would improve the shift entry compared to NORMAL, but it didn't.
I had a short test drive, and I was pleasantly surprised by the improvement? I am planning to go on a long touring trip. I am planning to do long touring from now on, so I expect that my impression will be different. If I can confirm the improvement, I will give my impression again.
View detail
Fits: HONDA Super Cub MD, HONDA Super Cub Pro, HONDA solo, HONDA MD90 (Postal CUB), HONDA MD70 (Postal CUB), HONDA CL50, HONDA MD50 (Postal CUB), HONDA BENLY50CD90, HONDA BENLY50CD50, HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA SUPER CUB110
New, good.
Used for a Lantern CUB of a memento. The suspension has been changed from 17in. to 14inch of LITTLE CUB. I wanted to wear 17in. TRTire, and if I had held out for another year or so, I could have had 17in. TRTire!!!! I was very sad and heavy! I bought the wheel used and I don't remember replacing it, so I proceeded to work on it this time because I was free from work. I will report back if there is any change after that! View detail
Fits: HONDA CRF1100L Africa Twin, HONDA CRF1100L Africa Twin Adventure Sports, HONDA CRF1100L Africa Twin Adventure Sports ES, HONDA XL750 TRANSALP
Really recommendedParts
I thought the OEM footpeg of CRF250L was too narrow and glaringly not good enough, so I replaced it with this RALLY Footpeg from OEMAttachment.
It is also about 1.2 to 1.3 times Wider and has a nice texture. Above all, it is an OEMAttachment setup, so Spring can be used as is, and a brand new split pin is included.
The width of the car is wider and more secure when riding in everyday life, and when standing, the stability is incomparable to that of the OEM car.
It is not expensive, and I really recommend it!
View detail
ARCHI Change Rod Retainer
Package landed safely.packing tiptop.item is well built and solid.shifting is smoother than before..highly recommend.thank you team webike.more purchase to come.shop with ease with webike. View detail