Reviews
Fits: HONDA monkey, HONDA monkey
I think that attachment is easy and it is what is not understood unless it is those who understand. It is w which I regard as appearance looking thick.
I think that attachment is easy and it is what is not understood unless it is those who understand.
It is w which I regard as appearance looking thick.
View detail
Although 笙ェ engine performance which also made the swing arm the same color is the touch regarded as the kana ? which went up since the wheel is polish .. It is large satisfaction. ~ which was extolment also from the friend equipped with the swing arm
Although 笙ェ engine performance which also made the swing arm the same color is the touch regarded as the kana ? which went up since the wheel is polish .. It is large satisfaction.
~ which was extolment also from the friend equipped with the swing arm of OVER.
It may be better for the direction of liking [ a thick swing arm ] to choose the thing of a company famous for a swing arm.
View detail
It is dramatically good. In play [ of other people ] is telling all. not being written to them -- a little . In the case of the vehicle type which has changed the drive sprocket into 16->17 dishes in 520 and 530 sizes, a chain may make it a ch
It is dramatically good.
In play [ of other people ] is telling all.
not being written to them -- a little .
In the case of the vehicle type which has changed the drive sprocket into 16->17 dishes in 520 and 530 sizes, a chain may make it a change assist a little.
It is better to adjust a drive sprocket with Ho of a driven sprocket with 16 dishes, when those who are worried want to change a moderation ratio although I think that it is so much satisfactory for running.
They are goods good without a complaint except it.
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI W800, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ400R, KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI ER-4n, KAWASAKI 1400GTR, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZR-7/S, KAWASAKI ZR-7/S, KAWASAKI Z750 (water-cooled)
It attached to GPZ900R (A8). The former somewhat far change pedal became the best location. Moreover, knurling of a skid is also well effective. However, even if it changes only the location of a step, with the angle of a change pedal, for som
It attached to GPZ900R (A8).
The former somewhat far change pedal became the best location.
Moreover, knurling of a skid is also well effective.
However, even if it changes only the location of a step, with the angle of a change pedal, for some persons, it may be hard to ride and may become.
Moreover, it is whether practice is required at first?
Considering a price, I am satisfactory.
View detail
After exchanging rear suspension, cfc TOSASU felt it soft and there was uneasiness. Although what is necessary is just to all also have exchanged cfc TOSASU, it is hard-pressed pocketbook and exchanged springs. After exchanging, the touch which th
After exchanging rear suspension, cfc TOSASU felt it soft and there was uneasiness.
Although what is necessary is just to all also have exchanged cfc TOSASU, it is hard-pressed pocketbook and exchanged springs.
After exchanging, the touch which the breaking which was uneasy until now becomes brave, and is holding the road surface mounted.
It is the data about SETTENGU sent together with goods that was glad.
It was saved.
Moreover, going to a peak by this became pleasure.
View detail
It is liable to a full bottom at the time of a full brake, and exchanged for the undercowl interference prevention in the uneven level difference with normal.
It is liable to a full bottom at the time of a full brake, and exchanged for the undercowl interference prevention in the uneven level difference with normal. View detail
Fits: HONDA Giorno (4Cycle), HONDA DIO(4Cycle), HONDA SUPER DIO, HONDA TODAY, HONDA TODAY
Although 笙ェ appearance which was very good shopping although he wanted to exchange rear shocks and in play was seen and decided also changes, a degree of comfort compares pure, is solid, sense of security and sense of stability increase, and it is very pl
Although 笙ェ appearance which was very good shopping although he wanted to exchange rear shocks and in play was seen and decided also changes, a degree of comfort compares pure, is solid, sense of security and sense of stability increase, and it is very pleasing. View detail
CB1100ABS was attached and used. He has a feeling which the breaking corner ring was completely different and became brave. Although it is somewhat more expensive, I think the parts which may be effective.
CB1100ABS was attached and used.
He has a feeling which the breaking corner ring was completely different and became brave.
Although it is somewhat more expensive, I think the parts which may be effective.
View detail
Fits: HONDA Giorno (4Cycle), HONDA DIO(4Cycle), HONDA SUPER DIO, HONDA TODAY, HONDA TODAY
changing into this Sas, although he had got lumbago because of with the bottom of normal suspension -- with a bottom -- shoes -- a degree of comfort also becomes good and is comfortable!! those who have ridden on Today -- it is recommended at everybody.
changing into this Sas, although he had got lumbago because of with the bottom of normal suspension -- with a bottom -- shoes -- a degree of comfort also becomes good and is comfortable!! those who have ridden on Today -- it is recommended at everybody. View detail
Fit straight on and looks great
Fit straight on and looks great View detail
When it was going to attach the aluminum swing arm made from a thailand to KSR110, there is no rear axle shaft and it used the general-purpose axle shaft here. When seen from the pure axle shaft, the same product made from steel of riding of grease wa
When it was going to attach the aluminum swing arm made from a thailand to KSR110, there is no rear axle shaft and it used the general-purpose axle shaft here.
When seen from the pure axle shaft, the same product made from steel of riding of grease was also good at satin, and received the strong impression.
Since it is important components, it is recommended at those who want to be scrupulous.
View detail
With separate-handle-izing, the back step corresponding to it was looked for. Although various back steps of each company were looked for, this product made from OVER also with a realistic price was decided on. It is the result which can also sati
With separate-handle-izing, the back step corresponding to it was looked for.
Although various back steps of each company were looked for, this product made from OVER also with a realistic price was decided on.
It is the result which can also satisfy structure of each part.
Especially the bearing went into the operation part of a pedal and a peg, and the motion became a smooth in it from the back step made from OVER for former Vmax.
However, although former product made from OVER and back step for Vmax of the only uneasy point were also so,
since the bolt stop of the plate of a direct back step will be carried out to an engine cover and an engine -- if -- a fall and the worst -- it may stand and the bolt stop portion of an engine cover may die also by GOKE.
.
.
View detail
With what does a run change suddenly like this only by changing an axle shaft? It changes, and if it rides, it understands. They are the components of a super-recommend.
With what does a run change suddenly like this only by changing an axle shaft?
It changes, and if it rides, it understands. They are the components of a super-recommend.
View detail
Fits: YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R
Since there were many sneakers and foil opportunities, it purchased. Since appearance was spoiled without taking pains over attachment since it was a y's gear, it did not become precocious. Since the attachment screw was also a stainless, there ar
Since there were many sneakers and foil opportunities, it purchased.
Since appearance was spoiled without taking pains over attachment since it was a y's gear, it did not become precocious.
Since the attachment screw was also a stainless, there are also no worries about rust and it is satisfied.
View detail
Fits: KAWASAKI ZRX400, KAWASAKI ZRX400II, YAMAHA XJR400R
The separate handle was used, and since power tended to incline toward the front, it attached. Although it is town riding Mayne and the effect is seldom demonstrated --!!
The separate handle was used, and since power tended to incline toward the front, it attached.
Although it is town riding Mayne and the effect is seldom demonstrated --!!
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100
In language, although explanation was difficult, and GSX-R1100 was owned, the zephyr 750 approached touch like a racer replica. It is moved by firm handling... I thought that I should have attached earlier.
In language, although explanation was difficult, and GSX-R1100 was owned, the zephyr 750 approached touch like a racer replica. It is moved by firm handling... I thought that I should have attached earlier. View detail
Kymco The sooner 100 is equipped. There was no tandem step, and since it was complained that a guide peg was slippery, it attached. A hole suitable for attachment is also located in an exactly good location, and it is a cinch. It is large popu
Kymco The sooner 100 is equipped.
There was no tandem step, and since it was complained that a guide peg was slippery, it attached.
A hole suitable for attachment is also located in an exactly good location, and it is a cinch.
It is large popularity as having become easy at the fellow passenger.
View detail
Fits: HONDA FTR223, SUZUKI glass tracker, SUZUKI Glass Tracker Big Boy, HONDA FTR223, SUZUKI glass tracker, SUZUKI Glass Tracker Big Boy
He wanted to suppress the nose dive at the time of a slam on the brake, this product was purchased, and it attached to FTR223. Attachment is easy if a front wheel is raised. If I get a friend to help the direction which cannot be raised, in about
He wanted to suppress the nose dive at the time of a slam on the brake, this product was purchased, and it attached to FTR223.
Attachment is easy if a front wheel is raised.
If I get a friend to help the direction which cannot be raised, in about 15 minutes, it will exchange and it will be made.
since it only turns although it is setting -- being easy (the small monkey is useful) -- it can do and a span of adjustable range is also quite wide.
It was able to come to apply brakes in comfort.
Since a rank amateur like me can also feel by one Yukichi (those with change) and can buy relief, they are parts which we can recommend to you.
View detail
Although it attached and was satisfied with the eye factory of the thing which OH(ed) pure SP Sas, it was different to the extent that the difference in a damper understood that it is a smooth of initial motion when NSR which is putting in the ohlins is s
Although it attached and was satisfied with the eye factory of the thing which OH(ed) pure SP Sas, it was different to the extent that the difference in a damper understood that it is a smooth of initial motion when NSR which is putting in the ohlins is straddled also by SHIROTO! It is recommended! View detail
Looks good at a good price
Looks good at a good price View detail