GT Project Motorcycle Drive Sprocket / Front Sprocket Reviews

Filter

Write a review and get Webike Points!

Reviews

KITACO

31 Aug 2023

Drive Sprocket (Front)

Fits: HONDA DAX125, HONDA glom, HONDA CT125CT110 HUNTER CUB, HONDA MONKEY125, HONDA SUPER CUB110-PRO, HONDA CROSSCUB110, HONDA SUPER CUB110

Japanese Webike user

5/5

Exchange with Chain Exchange

Since this is the second time the Chain has been replaced (13,000 km since the last replacement), the Sprocket was replaced as well.
When I took the car to Motorcycle shop for its 3rd year inspection, they recommended that I replace the Sprocket. (Mileage:26,000 km)
However, we could not think of raising the number to a higher speed than the current one due to the lack of Torque on uphill slopes, so we decided to leave it at NORMAL.
The product itself was fine, and the installation went without a hitch.
The new and removed parts were stacked on top of each other to check the decrease in the amount of wear, but there seemed to be no decrease at all.
When removing the mounting bolt of the Sprocket, the shaft did not rotate when GEAR was inserted, and there was no problem. (Slotted screwdrivers were used on the teeth of the Sprocket to prevent the shaft from turning.)
I am not sure about the durability of the product, but I do not think it will be a problem because it is a manufacturer's product. View detail

SUNSTAR

27 Aug 2023

Front Sprocket

Fits: HONDA NC750S, HONDA NC750S DCT, HONDA NC750X DCT, HONDA X-ADV, HONDA NC750X, HONDA NC700X DCT, HONDA NC700X, HONDA NC700S DCT, HONDA NC700S, HONDA INTEGRA, HONDA INTEGRA, HONDA CTX700N DCT, HONDA CTX700N, HONDA CTX700

Japanese Webike user

5/5

no problem

The price was a little lower than OEM Product.

The car has a mileage of 60,000km and was replaced with an OEM Product that came with the car since it was new.

The OEM Product that I removed, I couldn't tell if it was decreasing or not, but what about SUNSTAR?

As for the installation, it was done without any problems. View detail

KITACO

25 Aug 2023

Drive Sprocket (Front)

Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100

Japanese Webike user

5/5

Honda's Mission mopeds are Large body compatible.

[How is it used?
I bought it to refresh the drivetrain which had been neglected for a long time, and to replace it with a Driven Sprocket that was swung to the maximum speed side about 2 guns more than OEM because I replaced it with a 90cc Engine of Tanaka Shokai. I bought it to refresh the drivetrain.
Was the one you received as per Image?
KITACO's Custom parts has been helping me a lot since I got my moped license in the summer when I was 16 years old.
Honda's DriveSprocket for mini bikes is the same as the Large body, so it was a product that I was too familiar with and passed by the Image because I have been using it since I was participating in mini bike races with my NSR50.
Was the installation difficult?
The Driven Sprocket is easier to detach than the Driven (Rear sprocket).
The SprocketBody can be easily removed by removing the Cover, removing the two Bolts holding the Sprocket & Holder, and removing the Holder along with the nails.
When installing, the reverse of the above procedure is used to complete the assembly.
How was your experience with it?
Is this a steel product to reduce weight? It is a steel product, but it has a hole in it moderately, which could be mistaken for a hole for fixing the Holder.
Although it does not have the noise reduction rubber like OEM products, its durability is no less than life, and its price is reasonable and the number of pins is abundant. When I was enjoying mini bike racing, I owned several types of Driven Sprocket to change the number of pins by CourseLayout and do some kind of setting.
[Included Parts:were they on?
One Driven Sprocket and one HolderPlate for fixing.
[Was there anything that disappointed you?
I have used them for over 30 years on various Honda-based Mini bikes and have never been dissatisfied or disappointed.
Originally, DriveSprocket is a discreet Parts and is covered by Case cover in NORMALSpec. Motorcycle, so it is a Parts that is only seen in terms of functionality.
Other items that would be helpful
Point and hang of installation
Since it is easy to remove and install, the work tends to be messy, so do not be in a hurry to make sure that you do not forget to tighten the screws.
[Availability and clarity of the Instruction Manual
There is no Instruction Manual, but the product is easy to understand.
[Notes]
Since you will be working on the drive and braking systems, be sure to carry out the work properly and reliably.
[ITEMS TO BUY TOGETHER
Aside from replacement for setting, if replacement is due to wear, the front and rear Sprocket & Chain are in the Quantity:This is a place that should be replaced by Set, so please consult with your budget before purchasing.
Since the rear wheel is to be removed and attached, if there is room, it is better to take the rear brake shoe into consideration as well, since it can be done in one operation, making it easier later.
[Opinions and requests to Manufacturer
I continue to be a customer for various parts of Mini bike and I look forward to working with you in the future. View detail

KITACO

22 Aug 2023

Front Sprocket

Japanese Webike user

4/5

Driven Sprocket17T

Purchased to get better fuel economy for ns1
Acceleration is worse, but fuel economy has improved, so I am satisfied.
Select 17T, the largest size View detail

XAM

05 Aug 2023

Front Sprocket

Fits: HONDA HORNET900, HONDA HORNET600, HONDA XL1000V VARADERO, HONDA VTR1000FVTR1000F FIRESTORM, HONDA VFR750F, HONDA NR750, HONDA CBR900RRFire blade, HONDA CBR650F, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CB650F

Japanese Webike user

4/5

A standard item. Valuable Size expansion, although the delivery time was long when the product was out of stock.

Because I ride a motorcycle that is a reimported vehicle and is unpopular with JapanFOR JAPAN MODEL, I have been living my life as a rider, struggling to find the right size even for drivetrain parts.

XAM has developed a wide range of Sprocket's number of Sprocket's pins, and is a member of the Sprocket world. Conscience." I believe that the "one" is the one that is the most important.
Please continue to support Lineup for many years to come.

Now, the product, as a RiderLevel, I have no problems with it at all.
From a Rider I know who does Race. Accuracy is not good; ISA is better." I was told, because there is no SIZE!!!! It makes me sad that even SUNSTAR doesn't have the number of Ding that we have to deal with.

I think XAM is picking up on this as there seems to be a similar event in the old car system.

We use Quantity when exchanging Chain:Purchased and replaced by Set.

Front sprocket is not so chippy to be replaced, but, well, I went with the momentum.
If you're going to exchange, you're all in the clear! View detail

KITACO

04 Aug 2023

Front Sprocket

Fits: HONDA NSF100, HONDA LITTLE CUB, HONDA CB50, HONDA glom, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion)

Japanese Webike user

3/5

Purchased to replace Driven Sprocket and Chain and 3 other items at the same time.

The standard 14T was replaced with a 15T and the Driven Sprocket was replaced with a 33.
As for Image, it looks like Drive was changed to 15.5 Ding.
The RPMs were lowered, so the fuel consumption was up 5 km.
The first gear can now be handled like a normal Motorcycle.
But as the Shop Owner said during installation.
OEM has anti-vibration Rubber, but this one does not.
He said that the running sound would change.
This is especially noticeable at low speeds. It is a clatter from toot-toot.
What do you want from a CUB?
This is what I felt most after the exchange.
Personally, I plan to return to the OEM standard 14T and 34-ding next time. View detail

XAM

03 Aug 2023

Front sprocket

Fits: SUZUKI GS50, YAMAHA YSR80, YAMAHA YSR50, YAMAHA YB-1, YAMAHA GT50, YAMAHA GT80, YAMAHA GR80, YAMAHA GR50, YAMAHA FT-1/FT-50 70-71, SUZUKI COLLEDA SPORT, SUZUKI GAG, SUZUKI EPO, SUZUKI RV50VANVAN, SUZUKI GT50, SUZUKI RG50

Japanese Webike user

4/5

Replaced because of rattling.

I had purchased a Sprocket from a low-cost manufacturer and was using it, but I was concerned about rattling from the beginning of the purchase, so I switched to XAM, a reliable company.
The rattling has been beautifully fixed and I am very happy with the results.
The vehicle in which it was installed was a YSR80, and since it was too high-revving engine to be suitable for city driving, we dropped the number of pins by one.
We have abandoned the maximum speed, but the emphasis on acceleration has made city driving much easier. View detail

JT SPROCKETS

24 Jul 2023

Steel Standard Front Sprocket 741 - 525

Fits: DUCATI SPORT TOURING ST3 S ABS, DUCATI SPORT TOURING ST3, DUCATI SPORT 1000 PAUL SMART LE, DUCATI SPORT 1000 S, DUCATI SPORT 1000, DUCATI GT 1000, DUCATI GT 1000 TOURING, DUCATI DIAVEL 1260 S, DUCATI DIAVEL 1260, DUCATI DIAVEL 1200 STRADA, DUCATI DIAVEL 1200 DARK, DUCATI DIAVEL 1200 CARBON, DUCATI DIAVEL 1200 CROMO, DUCATI DIAVEL 1200, DUCATI 999R, DUCATI 999S, DUCATI 999, DUCATI 998 S, DUCATI 1198 SP, DUCATI 1200 MONSTER R

Japanese Webike user

4/5

Easier city driving

I changed from 15T to 14T.
It is now easier to use 2nd and 3rd gears in town and on mountain passes, and 4th gear on roads without traffic lights, making driving easier and less jerky.
The replacement is a Large variant, but it works quite well and is highly recommended. View detail

SUNSTAR

21 Jul 2023

Front sprocket

Fits: SUZUKI GSX1300R HAYABUSA, SUZUKI GSX-R1100, SUZUKI GSX-R1100, SUZUKI GSX-R1100, SUZUKI GSX-R1100, SUZUKI GSX-R1100, SUZUKI GSX-R1100, SUZUKI GSX-R1100, SUZUKI GSX-R1100, SUZUKI GSX-R1100, SUZUKI RF900R, KAWASAKI ZZR600, KAWASAKI Ninja1000, KAWASAKI Ninja1000, KAWASAKI Ninja1000, KAWASAKI Ninja1000, KAWASAKI ZZR600, KAWASAKI VULCAN800, SUZUKI GSX1100F, KAWASAKI VULCAN800 Drifter

Japanese Webike user

5/5

16TSprocket

I am satisfied with Large, although the satisfaction level may not be indicated correctly.
The replacement was aimed at reducing fuel consumption and increasing cruising range when touring.
In order to make the DIY project as cost-effective as possible, we decided to replace the FrontSprocket first.
As a result, the rpm at 100 km/h on the highway dropped about 500 rpm on the meter reading. Do not think that it is only 500, but my car turns about 5000 rpm in 100 km, the longer the distance, the more large the effect will be. The fuel consumption of the important thing also fell by the change of ECUData, but it recovered to about 18 km/L by touring at a common sense speed.
In the future, we are planning to convert to a 42→41 car using the OEM Ninja 1000 Rear Sprocket to further improve fuel economy.
It would be great if Total's rpm could be lowered by 1000 rpm at 100 km/h….
It does not require much skill to replace the nut, but when removing the nut, a Torque Impact wrench with 600N-m or higher is required. It is so hard that you may think it is an Opposite Thread Screw.
When tightening the Torque wrench, after temporarily tightening the nut to get the proper tension of the chain, put the gear in first gear and insert a hexagonal wrenchetc. between the teeth of the Drive and Driven and the chain. Please refer to this page. View detail

DRC

13 Jul 2023

Dura Front Sprocket

Fits: HUSQVARNA FC250, HUSQVARNA FC350, HUSQVARNA FC450, HUSQVARNA FE250, HUSQVARNA FE350, HUSQVARNA FE450, HUSQVARNA FE501, HUSQVARNA TC125, HUSQVARNA TC250, HUSQVARNA TE125, HUSQVARNA TE150, HUSQVARNA TE300, HUSQVARNA TX125, KTM 125EXC, KTM 125SX, KTM 125XC-W, KTM 150SX, KTM 150XC, KTM 150XC-W, KTM 200EXC

Japanese Webike user

5/5

Replaced OEM13t with DRC12t.

Used for HUSQVARNATE250i MY22.
As per Title, I changed from 13t to 12t.
The rear sprocket is not set to be larger than the OEM52t, so the adjustment was made at the front, but the effect is outclassing and the benefit in mountain play is large tight.
That said, the cruising speed does not drop that much, and it can cruise at around 60 km/h with a comfortable margin. View detail

KITACO

06 Jul 2023

Drive Sprocket (Front)

Japanese Webike user

5/5

16 best

Be sure to put it on when you bore up! You can feel it! Backslash. (^o^) / View detail

JT SPROCKETS

05 Jul 2023

Steel Standard Front Sprocket 520 - 525

Fits: HYOSUNG GT 650 COMET S, HYOSUNG GT 650 COMET R, HYOSUNG GT 650 COMET, TRIUMPH TIGER 900 RALLY, TRIUMPH TIGER 800 XRX ABS, TRIUMPH TIGER 800 XRT ABS, TRIUMPH TIGER 800 XR ABS, TRIUMPH TIGER 800 XCX ABS, TRIUMPH TIGER 800 XCA ABS, TRIUMPH TIGER 800 XC ABS, TRIUMPH TIGER 800 XC, TRIUMPH TIGER 800 ABS, TRIUMPH TIGER 800, TRIUMPH STREET TRIPLE 765 S ABS, TRIUMPH STREET TRIPLE 765 RS ABS, TRIUMPH STREET TRIPLE 765 R ABS, TRIUMPH STREET TRIPLE 675 R ABS, TRIUMPH STREET TRIPLE 675 R, TRIUMPH STREET TRIPLE 675 ABS, TRIUMPH STREET TRIPLE 675

skooby

5/5

Genuine Front JT Sprocket for Suzuki GSX 650 F ABS

I purchased as a spare set to replace my stock ones when I change in a few weeks. Have used JT sprockets for many years and know they are brilliant quality and do last a long time compared to some other brands. Decided to stick to the oem set up gearing as this is how the bike is supposed to operate. Maybe in the futue I will try a tooth lower in the front but for now, stay OEM gearing. Easy part to find, I was surprised Webikes stocked them really and quite a few different versions for different models and makes. Price was pretty good. Ordered along with other parts so the shipping was good too. Arrived with no faults or issues. The outer box had been sealed with extra tape to ensure, nothing could fall out or escape during transit. Any empty space was filled with air pockets and bubble wrap so nothing could move too much and damage other more delicate parts in the box. The machining of these sprockets is second to none. The spacing for the bolts is perfect. No problems with anything really. I have not found a sprocket that is of high a quality for teh simialr price range before. I will stick with JT Sprockets.Have fitted before and know how they go on really easy little job. As I said, great quality parts from a great UK company. Thanks Webike for the great service as always and help with anything I need. View detail

SUNSTAR

01 Jul 2023

Front Sprocket

Fits: SUZUKI GSX250FX, KAWASAKI ZZR250, KAWASAKI ZXR400R, KAWASAKI ZXR400, KAWASAKI ZXR250R, KAWASAKI ZXR250, KAWASAKI ZX-4, KAWASAKI ZEPHYR400χ, KAWASAKI ZEPHYR400, KAWASAKI XANTHAS, KAWASAKI KLE400, KAWASAKI KLE250 ANHELO, KAWASAKI GPZ400S, KAWASAKI GPZ400R, KAWASAKI GPZ400F, KAWASAKI GPZ250R, KAWASAKI GPX400R, KAWASAKI GPX250R II, KAWASAKI GPX250R, KAWASAKI FX400R

Japanese Webike user

5/5

A product that is sure to be highly durable

■Why did you choose it?
The main riding style is 500-700Km long per touring, with occasional driving events.
Therefore, durability was desired, and since the front is particularly subject to strong loads, steel was selected instead of aluminum, and made in Sunstar because of its renowned high roundness.

■Use it!
The OEM of ZEPHYR400X is 16T.
This is the second time the product has been replaced with the same product.
It was sure to be highly durable. (ManufacturerSpecifications says durability:10,000 to 30,000 km)
It was replaced after about 20,000 km, but the degree of wear of the teeth was as shown in the photo, and it was still in good condition with plenty of room to spare.
Since Chain passed away first, I had no choice but to use Quantity for both front and back this time.:Set to replace it

■COSPA
The unit price itself is not so different compared to OEM, so the cost performance is good.

■An aside
Sprocket (back and forth), Chain is 3Quantity when exchanging any of them.:I still think it is a good idea to replace it with a Set.
Also, do not build a structure that is unbalanced, with only the Sprocket having high durability, or only the Chain having high durability,
I think we need to choose.
If you buy a durable Sprocket and the Chain is cheap, you will have to throw away the Sprocket that is still usable by exchanging the Chain first, which is a bit of a waste.

Based on my experience of replacing them, I think it would be better to determine the durability of the Sprocket first, and then choose the Chain accordingly.
If you choose Steel's high durability Sprocket, Chain should also be high durability, Material:If you choose Sprocket in Aluminum, Chain is also available.
Cost performance will improve overall when Balance is considered, such as by using LightSpec.
(I think the most Cost is the high durability Spec.) View detail

KITACO

29 Jun 2023

สเตอร์ (หน้า)

Art

5/5

ใส่แล้วดีสวยงามแข็งแรงขนาดพอดีกลับโซ่ View detail