Reviews
Fits: SUZUKI V STROM 1050, SUZUKI V STROM 650
Purchased for Loading Hook
I purchased this for the installation of the Loading Hook.
I may replace the Blinker sooner or later, so I need one with Service hole.
It is well made
View detail
Inexpensive and functional!
Nut is anti-loosening Type, which is good for Number. View detail
I wanted Black!
This is great! It's a bit of an accent. View detail
![[K-CON Pro] License Plate Base](https://img.webike-cdn.net/catalogue/images/69385/0901-657-00050b0_TS.jpg)
License Plate Base
License Plate was installed to prevent bending and staining.
The size is exactly the same as the License Plate, so it fits nicely.
I would have liked it to be a little lighter in weight.
View detail
Lightweight and good.
[How is it used?
When I replaced the Tail Lamp on my Vmax 1200 with Universal Product 'It would be better to make the License Plate Holder lighter and less shaky.' and ad vise, so I exchanged it.
Was the one you received as per Image?
It was lightweight (about 149g) and had a good texture.
How was your experience with it?
no problem 。 Titaniumium Flange Bolt Standard Brand:ZETA Item Number:D6594 I was thinking of purchasing this Bolt, but I didn't need it because the Bolt that came with the product was also of good quality.
[Points to note]
Spring washer is not included.
How did it compare to other products?
I am satisfied. I looked for something lightweight, so Material:License Plate Holder in Aluminum was excluded.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
Product weight should be stated.
Installation instructions are in the photos only. I think it would be safer if precautions and other information were on the back of the PACKAGE.
The Black colored Washer was not included for 126cc and above. it seems to be different from the 50−125cc Washer.
View detail
Expectations for weather resistance. I think it will sell better if there are results of weather resistance test.
Unusual Material for License Plate Holder:Plastic, and AES resin. I had been a little curious about it for a while, but this time I decided to use it for my air-cooled LTWIN, which seems to generate more vibration than the air-cooled 4-shot that I ride on a daily basis.
First, Carbon Like." However, it is quite luxurious. It is not a smooth surface, but a texturing-like finish that gives the Carbon ground.
Compared to cheap carbon, this one has a more luxurious feel.
Also, whether it is Carbon or FRP, there are some edges missing due to slight tipping, etc, [Color] It would be quite poor and disastrous if Clear were floating or yellowing, but that does not seem to be a concern.
For functionality, if you want to use it on a motorcycle that vibrates a lot, use a license plate holder made of aluminum or other gold alloys, or FRPMaterial.:I definitely recommend this over Carbon's License Plate Holder.
Since it can tolerate quite a bit of sway in terms of material, it is excellent for vehicles that are off-road, SR400, or larger vehicles with Big single or TWIN engines.
I know many people suffer from cracking of the License Plate itself due to vibration in Single Motorcycle, but I think just replacing the Holder with this would be a preventive measure.
We have heard that AES resin is often used in automobiles such as Aero and Bumper because of its good weather resistance and moldability, which can be said to be upwardly compatible with ABS resin, but we would like to measure the Level of weather resistance compared to ABS resin in future use.
In the first place, Quantity:It's like 1pc.2000 yen, so if it keeps for a year, [Color] I think it's totally more cost-effective than paying 10,000 yen for Real Carbon, where Clear's Yellow change is inevitable.
However, AES is sensitive to organic solvents, so it is desirable not to apply too much VANVAN to parts cleaners and the like.
I had a feeling that the Large hand would imitate the Genre items in the future, since they had not existed in the Motorcycle Aftermarket parts until now.
View detail
perfectly (suited)
Perfect for your local Number!
The number is small, so it is not likely to be bent even if it was there much.
It is safe.
I'm putting up the Seal of the Shrine Amulet.
View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
License Plate bend prevention
Before I installed the License Plate Base, I used to catch my pants and bend them, but since I installed the License Plate Base, I haven't had any problems. View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
Simple is Best!
It is a perfect score because it was intended to reinforce the License Plate. 。
It is excellent in terms of strength, texture, and cosmetics.
It is not suitable for dress-up purposes, as it has almost no dress-up effect.
View detail
To one point!
I put it on because I wanted a change in appearance. View detail
Fits: Others Universal
DAYTONALicense Plate Holder
I had been looking for the color I wanted, but could not find it. I was able to buy other items at the same time, so I was able to get free shipping and I am satisfied with the large size. View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
Necessary and sufficient
Solidly made, thick and strong enough.
It is necessary and sufficient since it is installed for the purpose of preventing distortion and bending of the Number.
View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
Number Protection
I installed it to prevent the Number from bending. So far, it works well because it does not bend when it hits.
Also, it's very heavy.
View detail
Carbon number holder
Rough cut surface at the top for a reasonable price.
Disappointed.
View detail
Parenthesis OK
This is especially true for off-road motorcycles, but if the License Plate is simply attached to the Fender, it will bend easily at the slightest touch.
For this purpose, various license plate holders are available, but to be honest, they are just license plates, so there is no need to demand such high quality (they are not visible anyway), and it is difficult to choose the right product.
This Carbon Plate-like back plate by MotoServiceEdge has a Carbon-like finish on the surface, which looks really cool at a glance, like a Carbon plate.
The size is a little larger than the License Plate. Carbon-like." pattern is a little visible.
The price is reasonable and I recommend this!
View detail
Fits: その他
Exclusive products are ultimately safer than Universal Products
The Ceramic resistor part of the LEDNumberSIDEBlinker made by ACTIVE was damaged and became a high flasher, so I bought it for repair. I am glad to know that I can install it easily! I would be happy if ACTIVE would continue to sell Repair Parts. View detail
with Reflector
Purchased because of the Fender Eliminator.
The Reflector is convenient because it can be installed along with the Number, since it would be poorly maintained without the Reflector.
The product itself is thick and sturdy, so it is unlikely to be bent only at the reflector attachment point when it is caught on the cover.
I think the price is a little high, but the color is good and the rigidity seems high, so it is not bad.
View detail
Casual Accent but satisfying!
Balance of price and texture is good.
I wanted to match the color of the car body, so I am satisfied.
View detail
![[WALLESS] Aluminum License Plate Base Plate](https://img.webike-cdn.net/catalogue/images/59796/wls-001_01_TS.jpg)
Effective for License Plate resonance countermeasures
I was going to have the License Plate of VANVAN200 reissued because the crack started from the edge of the Mounting Bolt seat and the crack has been growing since then. I decided to purchase this product as reinforcement. 。
View detail
Fits: Others Universal
Yo...
Installed on the License Plate of Mrs. Rebel250.
I have pushed and pulled this product with it installed before and it went gasketed, but it bent with the License Plate, so I think it has no strength at all.
but purchased and installed again lol
This product is a little larger than the License Plate, and the main points of this product are that it is lightweight and can be easily installed. (´∀`)
Incidentally, when using the included anti-vibration sponge, the gap between the license plate and the panel becomes too large and the panel floats.
Overall, I think it is a good product for dress-up purposes.
View detail