Reviews
Functional Parts for a Bland Bolt
[How is it used?
For fixing Bolt of License Plate of SEROW250 which is used for mountain play.
Just by replacing the inorganic fixing Bolt with this product, it will look better, and it can also be used as a Net fixing Hook for when you have a lot of baggage. Two for the price of one. PARTS.
Was the one you received as per Image?
I saw a friend's Motorcycle that had already installed this product when I didn't know it existed yet. What is this aluminum color that looks like a very small version of the Tezuga?" When I asked him about it, he told me that it was a product installed for the above-mentioned purpose, so I immediately took a crack at Ideas.
The product was as per Image because of such a process of purchase.
Was the installation difficult?
The difficulty level is low because all you have to do is remove the bolt that was attached to the License Plate and install this product, and I think that anyone can easily customize this part.
How was your experience with it?
Most of them are free dress-up parts, but they are used for fixing the Hook of Net for Motorcycle when we carry a lot of luggage with Motorcycle, which happens a few times a year or not.
It is seldom used for functional purposes, but it is useful when it is.
Well, it's a bit of a duplication. Color Anodized Aluminum Collar Dress-upSmall things.
[Included Parts:were they on?
As you can see in the picture, each color Aluminum Collar, Cap bolt (length is about 20mm?), Nut, Nylon washer×2 and 1 piece of Iron Washer are included. and Nut and Nylon washer×2 and 1 piece of iron washer is 1Quantity:Set, and itsQuantity:Two Sets are included in the package.
[Was there anything that disappointed you?
My friend who used it before me bought the Red one, but after about a year or so the Anodized staining faded and it became just Silver, so he painted it Red with plasticolor and dyed the hollow side line White (it was exactly the Image of Zunga).
Anodized light colors may fade quickly.
Other items that would be helpful
Point and hang of installation
Even though the collar is sandwiched, it is basically a fixed Bolt. "Tighten with the proper Torque." I don't think there is a problem as long as the
"Loose and falling off." If you are concerned about the "Mere Old Man", it may be a good idea to replace the existing nut with a Lock nut.
[Availability and clarity of the Instruction Manual
No Instruction Manual, as noted above. Bolt & Nut+α for fixing So no problem.
It can be used not only for fixing License Plate, but also for fixing M6Size, so it can be used in various ways depending on each individual's Ideas.
[Notes]
Not particularly
[ITEMS TO BUY TOGETHER
Basically, no.
Bolt & Nut, Aluminum Collar, and Washer in Quantity:The set is complete, so if the purpose is to fix the License Plate, this product is all you need.
[Opinions and requests to Manufacturer
2Quantity:Considering that the Set costs about 910 yen, I would like to request a more UV-resistant dye.
View detail
Slight appearance change
I was looking for a Case to put my CALI certificate in and happened to come across it in a search and it was cheap, so I bought it.
I didn't like the position of the Sticker on the local number, so I'm glad I chose this one.
It is a product that is only for appearance, but I think this kind of product is also interesting and White.
View detail
Fits: Others Universal
with Reflector Black
Easy to install with good design and product precision.
The vehicle on which the SlightRear Fender was installed is a Z900RS with ARCHI's SlightRear Fender.
The number base that comes with the SlightRear Fender is designed to be installed using an OEM reflector, but the OEM reflector was not the right width for my taste, so I purchased this product with a narrower reflector instead.
The supplied Bolt nut and FlangeSpacer were not used because different ones were installed.
I did not use the urethane sponge, but I am satisfied with the appearance of the Image without any resonance.
View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
Good. ??
In my case, I could not install other holders because they interfered with the bracket of the driver's license plate, so I found this product, which is the same size as the Plate, and purchased it immediately.
The License Plate is the same size as the License Plate, so if you do not have enough space to install the License Plate, you can use the "Large" Recommendation!
It is a fairly sturdy Plate-type Holder, so you no longer have to worry about bending the License Plate by catching your foot or Cover. ^o^
View detail
Fits: HARLEY-DAVIDSON FLFB, HARLEY-DAVIDSON FLSL, HARLEY-DAVIDSON FXBB
Number bracket kit
Refreshing around the Number.
Parenthesis I got better.
View detail
Simultaneous installation with Fender Eliminator
I put it on because I thought it would help eliminate the cheapness of the bare Number. The angular design fits well and keeps the number position from looking unnaturally high. View detail
Fits: Others Universal
For License Plate protection
I purchased this to protect the License Plate. As other reviewers have mentioned, the License PlateBody does not fit into the groove of the Frame perfectly. I don't know if this is the reason for the cushion material, but I think the PlateBody will have to be lifted a little. I think that people who purchase this type of frame probably want to fit the license plate into the groove of the frame. If you cannot fit the license plate into the groove, we recommend you to purchase the type without groove. View detail
Prevention of License Plate cracking
The rim and claws are attached to hold the License Plate in place. View detail
No damage even after many falls!
I chose it when I participated in a race on an off-road motorcycle with a number.
If the Number is bent, unreadable, or damaged, it will fail the Race inspection and will not be able to run.
Material that is sticky and bends well:I had inherited Plastic to be resistant to damage, and I was right.
In the race, the Motorcycle was sometimes thrown or tipped over violently, but thanks to this Plate, the Number was able to run without any damage at all.
Material:Since it is heavier than the Aluminum Simple one, we recommend a firm attachment to the Fender section.
View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
Just the right Base for the Fender Eliminator
I bought this as a reinforcement for the License Plate of the Fender Eliminator. I wanted to use a slightly larger frame with a red frame, but it interferes with the tail cowl, so I decided to use this frame, which is almost the same size as the License Plate. It doesn't look any different, but it gives me a sense of security as a reinforcement. View detail
Fits: Others Universal
Note that Reflector is easily removed.
[How is it used?
I wanted to refreshing around the Rear of KDX220SR during Restore, so I set the Fender EliminatorSpec. to be used, but it was too refreshing and the Number seemed to bend easily.
Did you receive the item as per the Image?
butchered Material:It is a simple product made of aluminum with little assertiveness, yet it is a functional product that seems to work well and is exactly as shown in the Image.
Was it difficult to install?
Once the License Plate is removed from the vehicle, this product is inserted into the back of the License Plate and the work is completed.
BoltQuantity:Easy Custom that only requires 2pcs removal and installation to finish the work. (?) It is
How did you like it?
I installed it on a vehicle that vibrates a lot, but so far I haven't noticed any loose or cracked troubles.
Was "Included Parts:" attached?
Reflector type was purchased, so Reflector Plate, UrethaneTape for vibration reduction, Bolt&NutQuantity for installation.:2pcs BlackAluminumBolt colorQuantity:2pc. Set was included in the package.
Were there any disappointments?
As mentioned in the Title, the Reflector was removed from the Body during the installation process.
Looking at the Mounting Base, there were no claws for mounting and no trace of adhesive or double-sided tape, so it was a wonder it was still attached.
Probably if it had not been removed by this Timing, it would have come off during driving, so I wonder if I am lucky or not... I glued it with RubberBond for vibration resistance, and so far it has not come off.
Other items that would be helpful
Point and hang of installation
Since there is room in the large size of the hole for fixing the bolt, if you install the bolt properly, the bolt will be slanted or the bolt will be too large for the quantity of the bolt.:Pair (for Left and Right) If you are concerned about this, please check the upper and lower Quantities.:Pair (for Left and Right) Install it while watching the Balance of the
[Availability and clarity of the Instruction Manual
This easy-to-understand product also comes with an Instruction Manual, which is typical of Daytona's products in terms of ease of understanding.
[Notes]
As I mentioned above, Reflector is easy to remove. (Is it an individual difference?) I think it would be better to reattach it firmly with double-sided tape or Bondetc. to avoid a sad ending.
[ITEMS TO BUY TOGETHER
Nothing in particular, this product is all that is needed to complete the work.
However, it may be a good idea to purchase double-sided tape or bond etc. if you do not have them on hand to prevent the reflector from falling off.
[Opinions and requests to Manufacturer
Please make sure to take measures to prevent Reflector from falling off.
A few more color variations would be even better.
View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
Good texture
Large size as the License Plate.
Guard the bend of Number casually.
If you don't look closely, you can't even tell it's on.
View detail
Tanax Moto fizz plate hook4
I purchased this product to install Side Back on my BirdCity125.
I think the quality is good and the cosmetics are good.
This is a product of Recommendation to Scooter.
View detail
It was not for 125CC!
I thought I bought it for 125CC, but the product is for Horizontal Type, so the upper Quantity on the License Plate is not available.:Pair (for Left and Right) has overflowed.
The reason is that I did not carefully check the shape of Engine Displacement Volume and License Plate.
It is a waste to replace it with another product so we use it with the overhang.
Parenthesis bad (crying)
View detail
Ideal for crime prevention.
This is no longer an exquisite product.
The combination of anti-tinkering Torx bolt and anti-loosening Nut is kind.
The design is simple and the color line nap is abundant.
View detail
It has a sense of luxury.
Installed on PCX160.
It is quite luxurious.
Reflector is also satisfactory with good design.
View detail
Low-profile License Plate Base
[How is it used?
If you have a Fender Eliminator, there is a risk that the License Plate may bend, so we purchased a base plate as reinforcement.
Was the one you received as per Image?
The quality is not bad, but since it is FRP, strength needs to be taken into account to a certain extent.
Was the installation difficult?
It is easy to fix by simply clamping it onto the License Plate.
How was your experience with it?
Quantity:Pair (for Left and Right) The reverse side is attached with Carbon Seat, and the other side is attached with Carbon Seat. [Color] Clear is blown on it so it seems to be easy to clean.
[Was there anything that disappointed you?
It is thinner than you might imagine, so it is likely to be cracked by a Damage that hits it. It is a reinforcement to prevent the License Plate from bending.
View detail
To prevent cracking of License Plate.
The claws on the underside of the plate were the deciding factor in my choice, and they hold the License Plate firmly in place. View detail
![PREMIUM ZONE License Plate HolderQuantity:Set [M6]](https://img.webike-cdn.net/catalogue/images/15651/91950_O01_TS.jpg)
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
For Dress-up
PREMIUM ZONE License Plate HolderQuantity:Set and
DAYTONA lightweight License Plate Holder for 126cc and above at the same time
Purchase
I am satisfied with the dress-up.
View detail
Fits: Others Universal
To prevent LicenseNumber bending
I bought this to prevent LicenseNumber bending.
As for the work, remove the LicenseNumber (10mm Nut).
Install with Holder
View detail