Reviews
Fits: KAWASAKI KLX250, KAWASAKI D tracker, KAWASAKI D-TRACKER-X
The installation system is bad
It seemed that the position of the Screw hole was slightly misaligned as other people were reviewed..
Some sharpen etc.. I think that it will be necessary to devise such ingenuity.
Protection performance is unknown, but Knee grip may become easier.
Would not it be better to purchase it as Dress-upItems?.
View detail
Hold property rises, it is easy to control.
Because the car body is rounded slightly at NORMAL, the feeling of Hold is not bad for Off-road boots, but by attaching this Frame guard, the Hold property rises markedly.
In my riding method, footpeg and Step plate are important parts for Machine control, it is a foot belly, Heel and ankle, and it holds at various foot parts, but Frame guard is By attaching, the thickness also increased slightly, the area to be Hold increased, making it very easy to control. Although it is Standing, it is easy to get on because it has a solid feeling of Hold during Jump.
Installation method, but the installation manual was not enclosed.
I could judge by Pitch of Bolt hole of product so there was no problem but I think that Manual should be attached.
Body Right Side Quantity Heol Guard's Bolt : Remove 2 pc, add the attached Bolt to Quantity : Just tighten 2 pc.
Left Side removes the Drive sprocket cover, removes the Bolt of the Sub Frame, inserts it obliquely from the Driven Sprocket side, and tightens the Bolt of the Sub Frame. Tightening Torque, like OEM, 2. 7N - I closed with m. I think that it should be written for those who do not have a service manual in Manufacturer.
For me, rather than Frame guard, the meaning of the Step plate is Large.
As the sense of unity with Motorcycle increases, operability improves so it was perfect for me who is an off-road beginner. It is especially recommended for people who want a sense of unity with the body when the car body runs ramping when you run off-road, or those who are suffering from Control.
View detail
It also has thermal insulation effect Material : Carbon Style is also Parenthesis good.
Twill Weave Carbon I bought a pattern.
TL 1000 R, Without Heat Guard,
Although it may be thought that a hot thigh burns when it is hot,
With a Heat Guard it will not get hotter.
it's recommended.
Since it is fixed with double-sided tape, when removing Suspension, Bolt will be hidden, so it is necessary to remove it.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
I feel like OEM Product
I could not bear the heat of summer Frame and purchased it and installed it. I think that the heat has been relieved than I thought. The installation was also an OEM, did not do extra processing, soon came. View detail
Fits: KAWASAKI KLX250, KAWASAKI D tracker, KAWASAKI D-TRACKER-X
The purpose can be fulfilled but the accuracy is bad
I do not have any particular points (Lol) The purpose is achieved.
Bad point is bad accuracy. First of all, Screw holes do not fit and some cutting is necessary
As soon as Screw head does not fit in Body, we exchanged with Small Head Screw.
And the angle of the bent part does not match. Although it is necessary to adjust the angle with actual spot
You will need something like a vise to do for Beauty.
Also, to improve the processability at the manufacturing stage originally, Slit is lightly included in the folding line.
If you adjust it many times it will be politely broken with Gold genus exhaustion.
Although it does not do almost any surface treatment, it is more than the company's Skid plate
Considering that it is a place to rub it, I'm getting slippery.
Is not it better if the texture after consumption is cool?
Since there is only Frame guard for KLX and Carbon,
Although it is not as Designful, purchase for the purpose of protecting Frame.
Since Carbon 's MODEL has replaced Rear master to Yankaha' s Tank integral type than Gold 's face value, I can not expect it, I thought that Aluminum that can process was better and stopped.
In addition, we are also assuming that we will make one-off in the future, so we are considering it as a starting point for that.
View detail
Things are good.
I installed it in Honda X4. There are similar products such as Active and Habit Lee etc. Material : I am attracted to Carbon and chose this. It was not good as Heat Guard but it looked good. Installation of Side cover Bracket is extremely www www
A-tech products are Material : Carbon [Hand Ray Up Item] ClearGel coat is thick and slightly like White. Depending on the thing, the position of the hole is disengaged.
Basic It is an easy processing premise. I have written Instruction Manual.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Apply to heat measures. so-so.
Full cowl summer heat is unbearable. As soon as you touch the Frame. Although it is good as a measure, there are still a lot of conditions. Fit feeling and overall Balance is as good as expected. View detail
There are also other models
I inquired and purchased for RMX 250 S. There are also other types of cars so please put them up soon.
It is an Anodized item of satin finish. If possible, Color Anodized Aluminum such as Gun meta was good - - -
Because satin silver, soiling etc. are very conspicuous. There is no Clear paint on the surface.
There is also a place not along Frame Curve and you need to fix it.
It is considerably impossible for the price. Now it is difficult to purchase custom parts with out of print cars so it was not satisfactory although I purchased it without any choice.
I am also using Z - CARBON, but there are considerable differences in the result.
However, it is a pleasure to revive the outdated car Parts. Manufacturer's enthusiasm for ☆ 4. But Y'SGEAR like LePeraAluminum board is not a plate, there is a reasonable thickness so strength is no problem. Practicality is high, so it is Recommendation for those who place more emphasis on functions than it looks.
View detail
It's changing. (^^) /
I wonder how about SEROW 250, but I thought and thought
I thought that it is light because it is Aluminum
It's heavy as its thickness is so great, Fitting too
In the type that I have to put Color in one place
After all Quantity : Pair (for Left and Right) So that it will overhang
In other words "Fashion Put" You will say.
In addition, I can not agree with this fashionable part
It may be useless to recommend it to humans ^ ^;
I - - - , A little more how to install
Review again - - - I think about it (^. ^)y-.. o ○
View detail
A-TECHA-TECH Frame Seat Guard
For Frame's Small scratch hidden, this time it installed. Body, heat-resistant Tape, Double-sided Tape, Aluminum Tape (Black color) It was Set. There is a part which does not fit exactly when it matches Frame, and it can not paste with the attached Double-sided Tape (It will float) Since there was also part, reinforced by tightening the end part with Frame in Aluminum Tape.
Aluminum Tape seems to be included for that purpose. It is an impression that it was tastefully finished with gloss with Twill Weave Carbon when trying to install. I wrote that Clear paint is recommended for manuals, but I installed it as it is.
The place to worry about the fading condition after aging. For those who are outdoor storage, those who painted Clear may last long.
View detail
Cool!
Worked at the same time as Tank sideGuard, so we removed the Cowl and installed it. Parenthesis is nice.. I do not know the effect of summer, but it looks great! SIDE looks tight. There is no problem with mounting accuracy, Instruction Manual, Included Parts : Also gathered. View detail
Luxury feeling increases
Purchase to hide the fact that the foot rubbed against the front when Rear Sets were not wearing and the paint of Frame had become slippery.
I have never felt that Frame is getting too hot from the beginning, but this will not feel any more.
There are other similar products, but most of the other companies are considering servicing or things that are empty Type is mostly. But I do not touch the Bolt of that part, especially if there are no holes, the part to be cleaned is reduced (Lol) Select this Type.
Luxury feeling also increased, it is cool anyhow.
From now on, other parts are also Material : I think I will increase the number of Carbon items.
View detail
The color tone is Plating itself.
Unlike Black Plating image, because it is a perfect Plating color, I'm thinking to install it after painting Black. OEMSpec. So I think that accuracy is a sure thing. View detail
To Custom
I bought Twill Weave Carbon dramatically as it is a product I was curious about since the past ...
Well Delivery is slow and slow
It took 7 weeks
Remove Cowl, paste insulation Seat on goods and paste it with Double-sided tape from above.
It is not a difficult task but as it is necessary tools like hexagon etc.
I have an Instruction Manual
The item was fine and Exactly overall, overall I did not feel too much heat running.
View detail
I've had it installed at a motorcycle shop.It took quite a while.It's OK if you have an OEM footpeg, but if you have a different type, it will interfere with the frame.That was the reason that it took so much time.I inserted one piece of w
I've had it installed at a motorcycle shop.
It took quite a while.
It's OK if you have an OEM footpeg, but if you have a different type, it will interfere with the frame.
That was the reason that it took so much time.
I inserted one piece of washer and made it come outside. And now it's OK.
It has good appearance, and I can move the clutch without any problems.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
The SUZUKI GSX1300R-HAYABUSA 2002 model was equipped. It purchased in order to dress up with Carbon design. It is thin although the Design is good -- I was glad when thick to a slight degree.
The SUZUKI GSX1300R-HAYABUSA 2002 model was equipped.
It purchased in order to dress up with
Carbon design.
It is thin although the
Design is good --
I was glad when thick to a slight degree.
View detail
They are the goods currently regarded as it purchasing some day. The peach in both the guide-pegs root is lightly burned in [ Ride ] 極暑 the other day. When it could not bear any longer, it decided on purchase. requiring special attention, since it is n
They are the goods currently regarded as it purchasing some day.
The peach in both the guide-pegs root is lightly burned in [ Ride ] 極暑 the other day.
When it could not bear any longer, it decided on purchase.
requiring special attention, since it is necessary to remove a sheet by a Tank inferior border and that hitting (left-hand side -- especially) in the case of
attachment, and to lift a Tank.
It is just fit with sufficient processing accuracy, and satisfactory.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Certainly [ product / this ]! may be sufficient although pains is taken a little over attachment (.., such as desorption of a Cowl etc.)! Appearance is extreme good!!! A Fitting does not have deviation so much, either and is good goods!
Certainly [ product / this ]!
may be sufficient although pains is taken a little over
attachment (.., such as desorption of a Cowl etc.)! Appearance is extreme good!!! A Fitting does not have deviation so much, either and is good goods!
View detail
The frame cover was also attached in order to unify appearance, since the tank side cover was attached. Although attachment was easy and only being simply exchanged for pure parts, since it was attached to the location which is considerably different
The frame cover was also attached in order to unify appearance, since the tank side cover was attached.
Although attachment was easy and only being simply exchanged for pure parts, since it was attached to the location which is considerably different in hidden bolt positions being pure when it was itself, correction was required so that a bolt might come to the original location.
Although it may be necessary to modify depending on the case, since texture improves, it is recommended more than it.
View detail
Although it was an object for Ninja400R, since it was full compatible, ER-6n (2010 models) was equipped. twill carbon -- it is beautiful. . . If the work which cut(s) and sticks a heat insulating material on 笙ェ flesh side calls it time and
Although it was an object for Ninja400R, since it was full compatible, ER-6n (2010 models) was equipped.
twill carbon -- it is beautiful.
.
.
If the work which cut(s) and sticks a heat insulating material on 笙ェ flesh side calls it time and effort, it will be time and effort, but the attachment itself is completed in about 1 minute of a thing.
Since it is appearance 竊鯛?竊?although it is potted-plant parts, it is large satisfaction.
View detail