Reviews
Quality that only an OEM can provide
Since we put a cover on the body of the car, there were many times when the Mirror got caught on the cover and tore the cover...
It was difficult to cover the Cover with the protruding Mirror.
However, it is troublesome to remove Mirror each time. 。
OEM Flexible Bracket was purchased.
I used to use another company's product and liked it because of the range of motion, but the vibration ruined it quickly in the past.
I was skeptical, but I thought OEM would be large and sturdy, and the bracket was thick and looked sturdy, so I bought the YAMAHAOEM one. 。
Flexible Bracket
Flexible Bracket is not the type that can be folded down after installation, but the type that can be rotated back and forth freely. 。
YAMAHAOEM, Y's Gear's Flexible Bracket is
There are 3 types.
A Type H:115mm×W:100mm
B Type H:100mm×W:85mm
C Type H:75mm×W:65mm
I chose C Type because I want to show Refreshing around Handlebar.
However, if the vehicle has a screen such as SS or Scooter, the bracket may interfere with the screen, and it is not suitable for vehicles such as Separate Handlebars where the vibration of the vehicle body comes directly to the bracket.
after replacement
[Good point]
◎Mirror can be rotated and folded, making it easier to cover.
It can be neatly stored in→Cover.
◎Even when parking SPACE is narrow, it is possible to narrow the width of the car as much as possible.
◎Bracket is thicker and more rigid, making it resistant to vibration and less prone to Mirror shake. ◎Bracket is thicker and more rigid, so it is resistant to vibration and does not feel the shaking of Mirror.
◎Of course, Japanese Vehicle Inspection Correspondence.
[Bad point]
◎Maybe it is the way the Bracket is made, but the Mirror is more inward-looking, so visibility is reduced. ◎Bracket construction or Mirror is more inward, so visibility will be reduced.
◎Installation and adjustment can be time-consuming due to the many moving parts (laughs).
◎They are resistant to vibration, but because of the wide range of motion, the angles will Gap slightly if left unattended. →SmallAdjust frequently.
There are good parts and bad parts.
There is no problem at all for car inspection. 。
It would be better to use it with your own fine-tuning.
There are similar products even if they are not OEM. The point to pay attention to is the thickness of the base of the bracket. The thicker the bracket, the longer it will last.
View detail
Silicon spray
If you wipe it lightly with silicon spray, you can use it for a long time without any rust. Since there is no point rust at this level, I think the quality of the plating is good. View detail
I should have started out high.
I replaced it with Low Mirror … I couldn't see anything, so I bought just the Bracket for Repair.
You have to actually put it on.
View detail
Good looks, good rear view, good price
Round TypeRound mirror bracket was replaced with a Wing Bracket.
The Mirror has been set forward for improved style and visibility.
When replacing, be careful not to break the Screw threads, otherwise they will be Large sturdy.
Please note that Yamaha vehicles have Opposite Thread Screws, so please be careful about compatibility.
View detail
No matter how many times I post, it is not reflected in the revue...
[How is it used?
*Is this due to a communication problem? No matter how many times I post a revue, it is not reflected, so I will post it again.
The SV650X has a Mirror Holder on the handlebar of the Separate type, and its posture is slightly more forward leaning than the Standard type, so the distance between the head and the Mirror is closer.
Furthermore, the OEM Mirror has a long bracket and the Mirror section is far away, so the head can be seen in the rear while driving in a quantitative manner.:Pair (for Left and Right) The "A" mark is a symbol that indicates the number of the "A" mark.
If the Mirror part can be moved forward from the mounting point, the viewpoint can be moved away and the head can be moved to the Quantity when checking the rearward direction.:Pair (for Left and Right) I installed this product thinking that it would be possible to check by simply shifting the line of sight without swinging to the I installed this product thinking that it would be possible to check by simply shifting the line of sight without having to shake it.
Was the one you received as per Image?
The product was just as I had hoped in the Image, as the design was processed to bend the Bracket forward, allowing the viewpoint to be farther away, as I had hoped.
Was the installation difficult?
It is a simple process to install the OEM Mirror in the reverse order of how it was removed.
How was your experience with it?
As I mentioned above, the viewpoint is far away as I wanted it to be, and when looking backward in Mirror while driving, the head is Quantity.:Pair (for Left and Right) (Depending on the installation position of the Mirror unit...).
[Included Parts:were they on?
Mirror Bracket only as shown in the image (Quantity):Pair (for Left and Right) (sold separately).
[Was there anything that disappointed you?
This product is only available in Plating Specification... I would like to get the Black Spec. but I guess it is impossible to order as it is not a product that sells well....
0Other items that may be useful include
Point and hang of installation
None in particular. Fix it at any angle you like.
[Availability and clarity of the Instruction Manual
There is no Instruction Manual, but it is an easy-to-understand product.
[Notes]
This is not a Common For Left/Right Side item due to the forward curved design, at the time of purchase. For Right." For Left." Please do not make the mistake of purchasing the wrong one.
[ITEMS TO BUY TOGETHER
Mirror part is sold separately, so please purchase separately a Mirror of your favorite design that can be installed.
[Opinions and requests to Manufacturer
Plating version only if possible. Black version Please also sell
View detail
Plating is good, but I also want Black.
[How is it used?
The SV650X has a Mirror Holder on the handlebar of the Separate type, and its posture is slightly more forward leaning than the Standard type, so the distance between the head and the Mirror is closer.
Furthermore, the OEM Mirror has a long bracket and the Mirror section is far away, so the head can be seen in the rear while driving in a quantitative manner.:Pair (for Left and Right) The "A" mark is a symbol that indicates the number of the "A" mark.
If the Mirror part can be moved forward from the mounting point, the viewpoint can be moved away and the head can be moved to the Quantity when checking the rearward direction.:Pair (for Left and Right) I installed this product thinking that it would be possible to check by simply shifting the line of sight without swinging to the I installed this product thinking that it would be possible to check by simply shifting the line of sight without having to shake it.
Was the one you received as per Image?
The product was just as I had hoped in the Image, as the design was processed to bend the Bracket forward, allowing the viewpoint to be farther away, as I had hoped.
Was the installation difficult?
It is a simple process to install the OEM Mirror in the reverse order of how it was removed.
How was your experience with it?
As I mentioned above, the viewpoint is far away as I wanted it to be, and when looking backward in Mirror while driving, the head is Quantity.:Pair (for Left and Right) (Depending on the installation position of the Mirror unit...).
[Included Parts:were they on?
Mirror Bracket only as shown in the image (Quantity):Pair (for Left and Right) (sold separately).
[Was there anything that disappointed you?
This product is only available in Plating Specification... I would like to get the Black Spec. but I guess it is impossible to order as it is not a product that sells well....
0Other items that may be useful include
Point and hang of installation
None in particular. Fix it at any angle you like.
[Availability and clarity of the Instruction Manual
There is no Instruction Manual, but it is an easy-to-understand product.
[Notes]
This is not a Common For Left/Right Side item due to the forward curved design, at the time of purchase. For Right." For Left." Please do not make the mistake of purchasing the wrong one.
[ITEMS TO BUY TOGETHER
Mirror part is sold separately, so please purchase separately a Mirror of your favorite design that can be installed.
[Opinions and requests to Manufacturer
Plating version only if possible. Black version Please also sell
View detail
frequently
I think it would be a good idea to polish them frequently with silicon spray to prevent rust, etc. View detail
Mirror Bracket
I purchased this product because I wanted to shorten the Stay of Mirror that I am using.
This is a customization of Mirror for old cars while keeping the OEM style. I also used it on an old Yamaha two-stroke car, and the mirrors were lowered to make it more stylish.
View detail
No problem.
It is a normal product with no problems. It's very good for normal use. View detail
That's what I wanted!
There it is, just what I was looking for!
I was also able to attach it to the KITACO Mirror.
View detail
essential component
This part seems to be a must for the CBR250R RMC51
You can't see well behind you without it
At 5'7", all I can see are my arms
I suppose a few of these parts could be added to the structure so you can decide how many you want to install based on your physique
I was Large sturdy in one
View detail
It's tolerable.
OEMOption so texture and rigidity are quite good.
Since I just installed it, I want to see the durability from now on.
It is good that 3 Length Lengths are aligned.
Since I want to suppress the overhang, I select Short this time.
It is good not to see too much.
It was better if Black was there.
View detail
Changed to 50 ~ 90
KITACO KITACO : Round Mini Mirror Bracket
50 cm is short and hard to see
Changed to 90 cm
Still it is hard to see
I think that it is good for balancing with the car body
View detail
Fits: その他 Universal, その他 Universal
Design as I thought
It was a product as I thought. There is no problem with installation and texture is perfect.
Cospa is satisfied well also in terms of price.
Image when I installed it on the car body just like I was satisfied without problems.
View detail
Not obtrusive and inconspicuous.
Quantity in combination with Blue Mirror Circle : Pair (for Left and Right) I bought it with.
Because we are exchanging Handlebar with Z-Bar, I tried to shorten C to make Mirror inconspicuous, but the backward visibility is somewhat worse but the appearance is personally satisfied.
It is a product that can be relieved at the time of vehicle inspection as it can correspond to the new security standards because it can be adjusted back and forth to Flexible with built-in shock absorber..
View detail
Satisfied
First I bought a short item and I can not see the back at all
I repurchased a long Bracket,
You can see the back firmly this time,
It is good to choose Bracket's Length.
View detail
KITACOKITACO Round Mini Mirror Bracket 140 mm
I installed it on MONKEY.
First I bought Mirror with with 90 mm with Bracket, but as expected I only see my arm (Lol) So I repurchased Bracket Only 140 mm.
Speed's slow moping uses considerable care when changing course, securing backward visibility is important.
View detail
Mirror Bracket
When I bought the first short Bracket I can not see the back at all,
Later I bought a long Bracket,
I was saved because Length could be chosen,
The shorter one is apparently Parenthesis.
View detail
A-TECHA-TECH Mirror Extension 20mm
It is an Option product of A-TECHA-TECH Mirror. If you attach this, 20 mm Mirror becomes long and it feels easy to confirm backwards. I think that Color can also be chosen. View detail
Parenthesis I think it's good, but in COSPA way - - -
To S1000RR for Webike
I had you order
The figure that SS removed Mirror is formal wear
I think that this
There is a method of attaching (^ ^ ゞ
However, Magical racing
I need Mirror & Bracket
So when you buy at the same time expensive
I will become Mirror
View detail