Reviews
I'd be even happier with Clip.
I changed to brembo 19RCSBrake master cylinder, so the hose is also brembo's new one.
We cut about one-fifth of the tank while exploring the interference with the Cowl and where to fix the Tank.
Being brembo's Hose, the bore is naturally moderately good.
The hose clip does not come with the lens, so I tried using a clip I had on hand and found that a DAYTONA clip with an inner diameter of 10mm was a perfect fit. (11mm, maybe, or...?)
I used it with a good amount of bending, not to say 90-degrees, but I did not feel any particular strain on the hose and felt it was soft.
I appreciate the low price for the HoseSingle Body, but it would have been nice if the Hose clip was also included so I wouldn't have to go through the trouble of researching and buying one.
View detail
GALE SPEED's Radipon's TankNipple's Angle conversion
The GALE SPEED radipon only comes with a TankNipple with Straight and no 90-degrees in Option, though,
for Rear with Angle can be fitted with this AngleNipple.
They are sold in the supplemental parts and can be ordered.
I wrote it here because I can't do imprints on ordered products.
Well, they are essentially the same thing, right?
The Snap ring can be installed, but the Rib part is slightly thinner than the Nipple for Front, so the Snap ring will rotate round and round if the Rib is left as it is. (No exclusions will be made) 。
I have not tried it, but it seems that substituting Nipple for Front for Rear is not possible.
If the O-ring is not old, it is Large sturdy, but you are on your own if you install it.
Hose is normal! Hose clamp is included. The inside diameter is not clear, but it is for brembo etc...
View detail
haughty
I used it in RCS and had about half left over.
Unlike Company B's KRear hose, it is not translucent but beautifully transparent.
Flexibility is not good, and the inside dents when bending.
I heard that if you bend it through another Tube and put it in boiling water, it bends well.
I don't know how durable it will be in long-term use, but so far it hasn't sweated.
View detail
It's going to look good.
Transparent Tube.
I wanted to extend the hose of the Reserver and decided to make it transparent anyway! I bought it with the idea of making it transparent.
It uses Project mu's Green Fluid, which looks Skeleton-like.
It is also useful for air venting because it allows the user to see air bubbles that have accumulated in the hose during air venting.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Exactly in subtle Size
The normal Φ8 hose clip is too thin and tight, while the Φ10 hose clip is too stiff.
This is a dedicated Hose, so the Size is Exactly.
That alone is already worth it.
Cloth-wrapped Spec. but the cloth feeling is weak.
It will have a fairly smooth surface finish.
So, it is not suitable for older cars that want to have a full cloth feel.
Performance is unquestionable!
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
very durable, strong, no leaking
I've installed 3 Kohken mesh type oil tank hose on my motorcycles for 3 years and now on Hayabusa. It's high quality, very durable, strong and no leaking. It has 2 clip available which is a advantage for being ready to install. View detail
Babyface Reservoir Tank Hose
When replacing the brake master cylinder, replace the black of the Reservoir Tank Hose. [Color] I bought it to change to Clear. I am happy with the look and feel of the KRear hose. View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Durable hose
Excellent quality of brake fluid hose, it is easy to install and have been using it for 5 years plus, and still no leaking. Recommended View detail
I'll just swap it out.
only after ... is it ... [Color] I bought Clear.
Not sure yet if I'm going to sweat it out, so we'll see.
View detail
Thailand Gong Tube!
This corrosion, weather, chemical, and abrasion resistant tube is similar to a regular silicone gumTube, but is completely different.
I think the Gold amount is also about 8 times different.
But I know of only one such chemical-resistant, transparent Tube, Thailand Gon.
The fact that it is used in medical institutions, research facilities, and petrochemical combinators is testimony to its superior performance.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Brembo master cylinder
Buy Hose cut too short (laughs)
Compared to the texture of the Brembo master, I would like a more luxurious feel.
View detail
OEM Product is the safest choice
[How is it used?
MainMotorcycle's XJR1300C has brembo's 19RCS installed in the brake and clutch master cylinder, and when replacing the handlebar this time, the oil tanks of the brake and clutch were replaced and the oil tank stay was replaced. The oil hose was also newly replaced.
The original Hose is also bremboOEM Product, but it has been used for about 4 years, so we could see some deterioration, so we replaced it.
Was the one you received as per Image?
As you can see in the image, it is a plain black rubber hose.
There is an image of a Caliper being applied to the product image, but it did not look like it was measured accurately with Caliper, so I measured it myself. Please note that these are only measurements taken with Scale, so please use them as a reference.
The outer diameter was about 10mm and the inner diameter was about 6mm. brembo's Nipple is 7Φ so I think the size is correct.
The length was about 100mm. If you want to change both Brake and Clutch, you can use Quantity.:You will need 2pc.
Clutch was about 1/3 of the way to Garbage, so I felt a little wasted.
How was your experience with it?
This oil hose is an OEM product, so you can use it with peace of mind. If you buy a hose from another company just because it is cheap, it will harden quickly, or worse, crack and fluid will leak. If you have any doubts, I recommend brembo's oil hose.
[Points to note]
Hose clip for 10? inner diameter will not fit in the nipple part.
MASTER's Nipple is Material:Be careful not to forcefully pry as it is plastic and can be damaged.
Some people stop at Tie Wrap, but I think Wiring is better.
How did it compare to other products?
This Hose is very good at not sweating. Koken's Hose with Mesh sweats.
I don't know why it sweats, or if the fluid is slowly leaking out, but if it is bad, it gets soaked, but this hose, a brembo specified product, does not sweat at all. I feel relieved.
View detail
Normal.
[How is it used?
For collecting Parts in Rose.
No leaks, no sweat? It doesn't seem to sweat.
Was the one you received as per Image?
Yes
Was the installation difficult?
No
How was your experience with it?
usually
[Included Parts:were they on?
No
[Was there anything that disappointed you?
None
View detail
Hose while replacing Master Cylinder. [Color] Clearly.
Hose while replacing Brake with RadialType. [Color] Cleared.
I bought it because I heard it was hard to sweat.
To bend it, you need to soak it in hot water, but once it is bent, it is fixed, so that is convenient.
[Color] Clear, so it's easy to check the air bleed.
View detail
Note the curvature
Since it is so much effort, I used it with Green Light color Fluid, which is more White than pure transparent. [Color] It's like Smoke.
You should not use a vehicle with a tight handling due to poor flexibility, or you should buy a longer Size and make it go around Large.
The inside is a little dented due to the way the picture was taken, just installed, so durability is unknown.
There was another part number for Rear, so I bought it, but both front and rear were this size.
View detail
Improved FluidHose texture
It improves not only the appearance but also the texture of FluidHose. View detail
Skeleton
ReserveHose was sweating, so I decided to replace it with a Skeleton one if I was going to replace it.
It's nice
View detail
I'm sweating.
I was sweating, kind of. [Color] I wonder if there is a good Clear-! View detail
3maOil tank→hose for Oil pump
The 3ma has a different size for the outlet diameter on the oil tank side and the inlet diameter on the oil pump side. This is a mean thing to do. But this tube solves it! It has a solid clip band and no stress. View detail
leak out
The transparent hose made it easy to see the air bleed and easy to change the large bore. View detail