Reviews
A powerful look!
I bought it because it was on Sale at a lower price!
Parenthesis is good with powerful Exhaust End.
As for the volume, there is a lunch box, so it's not a blast, but I'd say it's on the Large scale.
The EXUP wire is treated and then simply installed.
Baffle is also included, so I think the cosmetics are quite good!
Minus points for Material:Stainless Steel and heavy for its appearance.
View detail
good
Good quality, elegant sound, good looking product. View detail
Fits: KAWASAKI Ninja ZX-4R, KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja ZX-4RR
What a blast! Really Japan Government Certificated!
It arrived within 2 days of ordering. Delivery was very fast and I am satisfied with the Large change.
As for the sound, the sound is a ridiculous explosion, just like the regulation limit of 100db. LOL!
In contrast to other manufacturers' slip-on silencers, where the sound often does not change much at high RPM, the YOSHIMURA's sound is very different from the OEM's even at high RPM, so you can feel that the sound has changed.
The bass is already so loud in the low and mid speed range that you could get caught by the police. LOL!
The Instruction Manual was included and was very easy to understand regarding installation. It was very easy to understand. The tightening Torque was also included.
What do you need the next time you buy an Exhaust System here?
Simply purchase a new Gasket at the KawasakiOnLineShop!
View detail
Excellent Exhaust
The build quality of the Yamamoto Spec-A is amazing. The installation was very easy and straight forward. The sound is slightly aggressive at low revs but smooth. On the highway (60mph or 100kph) it is pretty quiet, which is good for longer trips. When I get another bike, Yamamoto Racing will be on my list of manufactuers for an exhaust. I just wish they made a header kit to match. View detail
Large Satisfied
Engine braking now works more gently than OEM.
The volume is just right without being too loud.
View detail
Fits: KAWASAKI ELIMINATOR 400, KAWASAKI ELIMINATOR 400SE
Recommendation for volume and sound quality purposes
I don't know about the output, but the sound has changed considerably.
Not so much immediately after installation, but after driving for a while, it becomes quite powerful.
View detail
MAGNUM is good
It's sound art. Size, color, and color don't come out. Korea chose this product because of noise regulations, but fortunately, it can pass. View detail
Installation super kan tan, sound exciting.
After removing the OEMSilencer, it was installed with a pop. The driving sound is sensual. I am very happy with my purchase. The good thing is that Webig had it in stock so I received it right away. View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
Excellent response.
This time, I noticed that the new one was defective and after installing it in the vehicle, I replaced it with a new one.
I had them send it to me and I was able to get it fixed. It is only a sticker, but it is true that the sticker was peeling off, so I asked them to take care of it, even though it was a hassle.
View detail
Yoshimura Magnum Carbon
셀프 장착 가능하고 소리너무 좋습니다 내바이크가 아주 다른바이크가 되엇습니다 너무 마음에듭니다 강력추천 드립니다!!!
구조변경만 되면 아주 좋을듯한데 무리없이 될꺼라생각합니다!!!
About quality and texture
About the feeling of use
Products to buy together
Difficulty of installation
Cost performance and comparison with other products
About shipping and packaging
Any concerns, cautions, or advice when purchasing
----------------------------------------------------------
You can install it yourself and the sound is great. My bike has become a completely different bike. I like it so much. I highly recommend it!!!
It would be great if the structure were changed, and I think it will be done without problems!!!
About quality and texture
About the feeling of use
Products to buy together
Difficulty of installation
Cost performance and comparison with other products
About shipping and packaging
Any concerns, cautions, or advice when purchasing
Powered by Google Translator
View detail
Style changes in about 10 minutes of installation work!
We are satisfied with the OEM Sound, so we replaced it with Slip-on Silencer, which is an easy replacement.
I feel like I am somewhat soaked and Sound has changed!
View detail
Exhaust System
I didn't like it because it was too big OEM, so I replaced it.
Happy with Slim
View detail
No problem
Today, he's going on a long trip, so we're actually going to put it on and drive.
As I mentioned in my previous impressions, yes, it seems to work on the 8BK without any problem.
For the sound of the explosion, I put a lid on the baffle and drilled a dozen holes about a millimeter across with a Drill.
The performance may be far from what it should be, but it will not be good enough.
We were able to get the sound down to the certified level.
Sound quality is... ・ Grom's Yoshimura muffler sounds better. sweat
Well, I like the shape.
The sound is louder than normal, which makes it easier to drive, clutch meat, etc.
I'm going to ride with this for a while to see how it goes.
View detail
It is easy to install.
Looks Patchy View detail
Japanese Government Approved Exhaust System
I replaced the Exhaust System every time I did vehicle inspections because it was a hassle.
Driving noise is OEM level, but other companies' Racing Exhaust System (It does not correspond to Japanese Vehicle Inspection.) I am satisfied with the ease of Accelerator operation compared to
The angle of the Silencer is looser in appearance than the earlier types, but I personally prefer this one, as it has the same angle as the one around the Rear Fender.
View detail
Mysterious Exhaust System that becomes quiet when turned
Idling is the sound of a normal single cylinder, but when it starts running, it sounds like a train, the same as the OEM, so it is not annoying even in Large urban areas.
The Exhaust System is light for the weight of the Thailand, and is ideal for clogs Motorcycle, which are fat in the mid and low speeds and not extended at the top.
View detail
Satisfaction goes up considerably.
The OEM Exhaust System also sounded good, but it didn't look good enough, so I replaced it with a We-Big-Pit-In. I have had both Exhaust Systems and the weight is definitely lighter. The driving, sound, and appearance have improved, and I am quite satisfied. View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
I looked at it in comparison. Both
I tried both Slip-on lineCarbon and Slip-on lineTruck di.
There is also a powerful low-speed Torque. Carbon, on the other hand, is a little slower at low speeds, but it seems to accelerate faster up to high rpm.
I will do so. This is a personal opinion, so you can choose by Design
I think. I think the performance of both is excellent.
View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
Quieter than OEM?
I replaced the Slip-on lineCarbon Exhaust with the Slip-on lineTruck exhaust and actually ran the engine at full power. I wonder why this exhaust system is not JMCA or Japan Government Certificated. Why is it that the volume is the same etc. as the standard value, but only for motorcycles?
I wonder why you are so strict on Exhaust System. Even though there is no regulation for cars, except for the volume, when the Exhaust System is replaced!
View detail
Fits: HONDA CB250R, HONDA CB300R, HONDA CB300R
What's that? It's on. Sweat.
Today, we temporarily installed the muffler. After much deliberation, we decided to go with the Acrabo muffler.
I really wanted a government-approved muffler with a reasonably good sound.
I don't like the shape of it, but I like the shape of the Aklab, it's perfect, but the sound is... sweaty.
I bought it because I thought it would be a good time to break it in after the break-in period.
Shipped 3 days later... sweat.
I had some time today, so I did a temporary attachment.
My CB250R is an 8BK, and this muffler is an impression of the 2BK muffler up to '21. The 8BK also has a 2BK exhaust manifold and slip-ons.
I knew it would be attached, but I thought that 2BK slip-ons would not be attached to the 8BKOEM exhaust manifold.
I was thinking about it. (I had heard some impressions that the 2BK Moriwaki exhaust manifold did not fit the 8BKOEM muffler.)
I was going to buy a 2BK exhaust manifold if it didn't come with this aclab.
because of ...
What? It's attached. Of course, it's not broken in yet, so it's a temporary installation. The exhaust manifold is not banded yet.
But it's like there's nothing to resist. It feels normal.
And when I put it on, I'm still concerned about the sound.
It was a blast, I felt it was like a Harley with a modified muffler.
I would like to remove the baffles and modify the sound deadening system.
I don't like the sound to be too Large... sweat.
For now, it's just a temporary installation today, so when the break-in is over and it's time to put it on for real, we'll do it.
I would like to make an impression to see if there are any obstacles.
I'm sure you have your preferences, but the sound is a blast. sweat
View detail