Reviews
Changes in Engine Characteristics
Impression after installation
The sound has changed to a more bass-heavy, stomach-churning quality.
I don't think the volume is that large, but it still feels annoying right after the replacement, but you get used to it after two days.
The Silencer appears to be a Punching mesh of Straight construction, sound deadening material, and a Collaborate Rate of multi-chamber construction.
Change in Engine feeling
Compared to Normal muffler
The Torque feel at low rpm is probably diluted due to the good power loss, but even if this is subtracted, the engine rpm rises smoothly as the pickup and run-up become light and smooth.
Engine braking during downshifts from 4th to 3rd gear, 3rd to 2nd gear, etc., and AxelOff is also lightened to a certain degree in the speed range.
RPM rise becomes Smooth, and acceleration is perceived to be faster due to the shorter time to reach the mid to high RPM range.
As a side effect, the Engine felt less vibration.
Although it was an expensive purchase, we believe the following points will increase the value of this Exhaust System
JMCA Government Certification allows for safe use in the event of an exhaust volume crackdown.
*This is taken to mean that the price tends to be higher because the labor and development costs of certification are passed on to the customer.
Exhaust characteristics are changed and the rpm rises faster, resulting in higher speeds, etc.
The muffler layout is more accessible around the rear axle shaft, making it easier to adjust the chain.
The MORIWAKI muffler is a traditional brand.
These are the good points of this Exhaust System.
View detail
Fits: SUZUKI V-STROM250SX, SUZUKI GIXXER250, SUZUKI GIXXER SF250
YOSHIMURAExhaust System
SEA BASSvSTROM250sxYOSHIMURAExhaust System installation took about 30 minutes, it took longer to remove the OEM exhaust system. I ran about 100 km after the installation, the Torque is higher and I can use the higher GEAR more, the uphill is stronger than NORMAL. View detail
MORIWAKI after all
I considered other Manufacturer's products, but I had a long-time admiration for MORIWAKI, so I bought it at OutletSale's Timing.
The product is beautifully finished, and the single-cylinder-like exhaust sound at low rpm and good blow-off at high rpm are also favorable.
View detail
Fits: HONDA GROM, HONDA GROM
nice sound
I feel that the sound changes from about 6000 rpm, and it is a nice sound that keeps me turning.
However, after one week and about 200km, discoloration and rust started to float, so I recommend applying StainlessGuard if you are concerned about it.
View detail
It doesn't make it a pontoon in the first place.
I had checked the 8BK-md47 many times with the staff before purchasing it to make sure it was really large and sturdy, but it was not easy to install as there was quite a bit of modification required.
Also, the design of the Silencer in the product image is different, and it is a mystery why this is not checked and changed every time.
First of all, the fixed bolt hole of the middle pipe is 20mm gapped to the Right when viewed from the front, a position that cannot be corrected by compensation.
The Silencer is not fixed to the fixed bolt hole because it interferes with the RightBlinker on the Rear, so I bought a Bracket and modified it to fit with the Bracket. The exhaust port is directly behind the License Plate, so it's really lame.
Why put a Manufacturer's product on the list that does not seem to conform?
And after confirming it many times, why did they respond as OK?
I don't know if the Staff here is too ignorant or appropriate, but I guess it is a company that can't help itself.
View detail
Large I am happy!
The sound was better than I expected.
The bass is more prominent than in the Normal muffler.
Not too loud, not too quiet.
View detail
Performance commensurate with price
Installation was completed in less than an hour and Gasket is included.
It is the same as OEM at startup, but you can feel the power coming out of the mid-range RPMs.
Also, the OEM exhaust system has a grainy sound starting at around 60 km/h, but this one has a solid single-cylinder thumping sound that is enjoyable to ride.
It is expensive, but I think it was worth it and effective.
View detail
Fits: HONDA GROM, HONDA GROM
Pleasant Pulse feeling and Sound!
Parts accuracy is very high and welds are in very good condition.
Installation is also extremely easy.
I was able to purchase the Large Variant Reasonable at webike's Spring Sale this time.
Thank you
View detail
I'm glad I bought it
[How is it used?
・Touring
Was the one you received as per Image?
As you can see in the Image, it's cool!
Was the installation difficult?
Request for Shop
How was your experience with it?
Better response when opening Axel, no more one-tempo13 delayed feeling before replacement.
Torque at the bottom seems to have increased.
The lighter the Exhaust System is, the lighter it is when riding in the car.
[Was there anything that disappointed you?
None at all
I was worried about the high price, but I am glad I bought it.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
BlackShort Tube - The Best Of BlackShort Tube
I purchased Z thinking it was a Short Tube in Black.
Idling is quieter than OEM, but brazen as it starts running and revs up.
The black paint also seems to work well with the Stainless Steel material, and there is no fading or peeling of the paint. Except for stepping stones,
The volume is tame, but you may choose it for its design appearance.
View detail
The YOSHIMURA
The sound is totally different from the OEM Exhaust System and is very good. The price is a bit steep, but it is worth it. View detail
Fits: YAMAHA WR155R
I'm glad I bought it!
Lighter than a normal muffler and effective on its own
It turned well.
After all, it is a high quality product that puts YOSHIMURABrand to shame!
The installation is also excellent with no modification!
View detail
Fits: HONDA CT125
become more elastic
I am satisfied with the appearance and sound of the Large, and I am not worried about the frame breaking because it is made very well and carefully, and it is held in place at three points. View detail
Normal look is the best
The bolt of the normal heat guard, especially the heat guard attached to the Exhaust System, is quite large.
It was tightened by Overtorque.
The cap bolt included in the package was a little short, so I procured an M8-45 at a hardware store.
As mentioned in the instruction manual, the Heat GuardBracket needed to be adjusted while making the actual adjustments.
It is good for those who like Normal look.
The silencer end changes the appearance of the silencer.
Sound has also changed to a thicker overall look and feel and I am satisfied.
View detail
Fits: HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB110PRO
Design good.
The OEMExhaust System is pretty quiet, so I went with this one, which is cheaper and looks better.
Simple design in Stainless Steel is good.
Sound is quieter than I expected, although Punch is there.
I am glad I bought it because it is quiet and I don't have to worry about my neighbors.
View detail
Fits: KAWASAKI Ninja ZX-4RR, KAWASAKI Ninja ZX-4R SE
I can tell from Start! He's a good guy, isn't he?
[How is it used?
Used for Touring from city to mountain.
Was the one you received as per Image?
Because the OEM chose Black as opposed to Silver,
It became tighter and tighter.
Was the installation difficult?
It was installed at Motorcycle shop.
The work took about one and a half hours for the Large body.
How was your experience with it?
The difference can be seen from low rpm.
Comparison with Normal muffler
・Normal muffler:
→ In the operation of Clutch and Axel when starting, connect Clutch
If it is too much, it will stall, so we will use more Axel,
I turned it too much and it reminded me of that feeling I had during my training.
The volume becomes LARGE at around 6000 rpm.
Trickster Ikazuchi (Full Exhaust System)
→Even with messy Clutch operation, it is easier to start.
The sound becomes more loud from around 4000 rpm, and it also blows better.
You will want to pull it without raising GEAR.
[Included Parts:were they on?
Trickster's Seal is attached.
[Was there anything that disappointed you?
Since the Idling was a medium-sized Motorcycle, it did not have the vibration sensation characteristic of the Large type.
Other items that would be helpful
KITACO's xk-17Gasket is supported, but the thickness is thinner than OEM, so OEM Product is used.
View detail
It is not as noisy as I thought it would be, which is a relief!
I think most people overwhelmingly choose YOSHIMURA for VSTROM250SX, but that is why I was attracted to this Yamamoto racing, which would not be an option for many.
Volume:89db/4650rpm (STD/86db) Acceleration noise:77db Weight:3.6kg (STD6.7kg) Was it?
The 89 decibels were not as loud as the numbers suggested. That was a concern, so I was relieved.
And although it is not a Type sound with that much bass, it is a light and unobtrusive Sound.
The OEM tended to be jerky because of the good characteristics of the Road type, but it moderated moderately and the Middle became thicker and extended pleasantly, which is also a characteristic of the Road type. This is also a characteristic of the road type. I think it suits the machine very well.
However, the instruction manual is too PRO oriented ^^;, so I was a little confused, but I managed.
Although the installation method has a slightly Floating feel, it would be Large sturdy if it were not running OFF BALIBALI.
I am satisfied with the large size, and the maniacal nature of the product! (^。^) y-. O-
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE
My first Full Exhaust System
I replaced the OEM after 8000 km on it.
Low-speed Torque is thinner than OEM.
Idling sound is 97~99 and very Large sounding, even at low speeds.
It has been blowing up better since around 6000.
I would recommend it to anyone who wants to get a large sound, which can be done with JMCA.
Also, there were no JMCA certification documents included.
View detail
Fits: HONDA GROM, HONDA GROM
nice sound
I bought it to enjoy the change of sound because it was cheaper on Sale.
Sounds more pleasant than OEM.
Looking forward to Touring!
View detail
Fits: YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA MT-125, YAMAHA XSR125
I seem to have a connection with YOSHIMURAExhaust System.
There were three criteria for choosing Exhaust System.
Government or JASMA certification (←Can be installed at YSP)
Short Type
As cheap as possible
The one that satisfied all three of these requirements was YOSHIMURA's CYCLONE.
Since the product is not yet on the market, the detailed evaluation was chosen based on speculation and expectation.
View detail