Reviews
very good product
This is a very good product. It blocks quite a bit of wind.
The design also matches the bike very well.
It's not easy to install, but it's sturdy.
If you are installing a damper, you need to think a little bit more. Since the installation locations overlap, you may have to give up one thing. -------------------------------------------------- -------- This is a very good product. It blocks quite a bit of wind. The design also matches the bike very well. It's not easy to install, but it's sturdy. Those who want to install a damper need to think a little bit more. Since the installation locations overlap, you may have to give up one thing. Powered by Google Translator
View detail
GILD Rear Caliper holder for Brembo P2 rear brake
About quality and texture Top quality aluminum bracket. With smooth finishing. The weight feels ok. Not too heavy or too light. It also comes with brembo fiting stainless steel screws. About the feeling of use Looks perfect in silver with my gun metal brembo rear brake. Products to buy together Bought it with brembo P2 with red logo. Item number 20.B852.78 Difficulty of installation Installation maybe shorter if the rear rim is easily removed. The fitting of the rim which takes a while. I replaced my rear hose so the total time about 2 hours. But just fitting the caliper and bleeding the hose maybe just an hour. Cost performance and comparison with other products Price is around slightly cheaper than the other brands but the finish is not short of the others I guess. About shipping and packaging Come in plastic wrap with bubbles wrapping for protection by seller. Shipping cost is not expensive as the item is not very big. Any concerns, cautions, or advice when purchasing The only concern is that the item maybe scratched as it's only cover by plastic but the seller did a good job by protecting it. And the item is made not easily scratch too. View detail
Brembo P2 rear caliper
About quality and texture Great finishing. Top Brembo quality. About the feeling of use Worth the money. Brake strength is just nice. Equal quantity to the the stock. Not too much or little braking power. Products to buy together I bought the Glid caliper holder for my Z900RS. Fits perfectly. With beautiful outlook. The striking Red Brenna logo stands out from far as I install a short muffler. Difficulty of installation Fits perfectly with the caliper holder without difficulty. Make sure you holder has screws to hold the caliper as it doesn't come with it. Fitting it to the caliper takes about 5 minutes. Cost performance and comparison with other products Worth the price for it's performance. Quite standard braking power with a reasonable price. About shipping and packaging Comes with a box but the warranty seal was broken when I received it. But no issues with the caliper. Any concerns, cautions, or advice when purchasing No issues with fitting and buying. Waited a short while when it's stated out of stock. View detail
![SPI-H32 Shift Position Indicator Exclusive Kit [for HORNET250]](https://img.webike-cdn.net/catalogue/images/41170/protec001_TS.jpg)
Fits: HONDA Hornet 250
PROTEC SPI-H32 Shift Position Indicator Exclusive Kit [for HORNET250]
Comapre with other indicatores this is the best one with good built qulity.Very eazy to fix with plug and paly as a manual said.Rear wheel taco Signal will get with protec provided extarnal magnet sensor which is located in rear wheel brake drum(you have to run signal cabale from front to rear ).Those 4 magnet will fix fermaly without falling down.CDI taco signal will get from speedo meter wire loom using with Y connector which is supply by protec.Even mai unit inut 12v power suplly Y cable also provided(then eazy to connect) Accuracy with running condition it's really good & it will show up real current gear position while on road.even we can programe up to our rpm ratio. Main indicator bulit with sensor while you are in bright sunlight area brighness of indicator will bright up automatically.Additanally we will get 2nos of protec sticker along with this. I will recomended those who love Bike enthusiast View detail
It's easy to install and the size is just right.
Easy to mount, just the right size and good. Easy to mount, just right and good. Easy to mount, just right and good. Easy to mount, just right and good. Easy to mount, just right and good. Easy to mount, just right and good. Easy to mount, just right and good. Easy to mount, just right and good. Easy to mount, just right and good. It's easy and the size is just right -------------------------------------------- -------------- Easy to mount, just the right size and good. Easy to mount, just right and good. Easy to mount, just right and good. Easy to mount, just right and good. Easy to mount, just right and good. Easy to mount, just right and good. Easy to mount, just right and good. Easy to mount, just right and good. Easy to mount, just right and good. It's easy and the size is just right. Powered by Google Translator View detail
Absolutely recommended item!
Quality and Design. Excellent manufacture to customize your Honda in 2 minutes. Safe and fat shipping! I just love it !!! View detail
Fits: HONDA CBX125, HONDA XR250, HONDA GB250 CLUBMAN, HONDA XLR250
Quality OEM parts received via speedy shipping. Great experience to purchase with Webike.
Beautiful product
Zero gravity good quality sticker. Beautiful product. I received good packing and perfect product from webike. Thank you we bike. View detail
Good for sv650x
It's very good product. Beautiful chain and perfect carbon steel of engine sprocket and rear sprocket. I recommend. I bought gold chain. 제품이 꽤 좋습니다. 추천드립니다. ---------------------------------------------------------- It's very good product. Beautiful chain and perfect carbon steel of engine sprocket and rear sprocket. I recommend. I bought a gold chain. The product is pretty good. I recommend it. Powered by Google Translator View detail
Fantastic
Super easy to apply with the sperately sold tool. Just follow(translate) the instructions & away you go. Make sure the rim is clean & that you spray each segment of rim with water immediately prior to applying the sticker. Be sure to work out any air bubbles etc from the application process. If it's not sitting correctly-immediately peel back and start that section again before the adhesive begins to bond. It also helps to use a hairdryer on each section after application. The mirror finish really pops, especially at night if light reflects off it at an agreeable angle. View detail
Handsome modification
About quality and texture: Good About the feeling of use: Exellecent About Design: Functionally Aesthetic About Size Chart: Accurate Cost performance and comparison with other products: affordable About shipping and packaging: well and safe. Any concerns, cautions, or advice when purchasing: make sure to know what screw size your mirrors are, these adapters are in M10 View detail
Worn Dry Clutch Components
Excellent set of products, sorted out Dry Clutch issue where Dry Clutch components had worn so much Clutch wouldn't disengage and spin freely. Now all working as it should. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
This is the overall satisfaction level for ass pain measures
Since I bought a z900rs, I have been worried about the ass pain that everyone else is suffering from,
I have been studying all over the Net and watching YouTube.
There were many candidates, but we chose DOREMI for quality, cost performance, and delivery time.
The product was out of stock due to its popularity, but thanks to the power of Large Hand Wafer Big, we were notified that the product would be in stock soon and it was delivered.
The Tandem seatBelt requires a hole to be made by myself, and although I was nervous, I was able to make the hole without difficulty,
Belt could also be attached, although it is a little stiff.
I usually get an ass ache as soon as I go touring,
I felt that it was considerably eased.
Footing is a little worse, but not a problem at all in exchange for butt pain.
I would highly recommend it to anyone who is unsure about Seat from another company.
The quality is as good as OEM is also recommendation.
View detail
Good quality & Recommended OUTEX Honeycomb Catalyzer 33060-10IN38
I'm using honda hornet 250DX.This is a late verson of manufacture.Im looking for changing chrome silencer bend which is use in hornet early verson.but unfutunatly early verson crome silencer bend doesn't include with catalizer.Finally i found this in webike and this will perfectly fitted in to the middle of silencer which is rich to exhaust temperture +300C above. Qulity of outex catalize is very solid and serial number and brcode will print on outside of wall. After using catalizer, earlier engine thin sound(without catalizer with silencer bend) will desapire and smell of gasoline will reduce. Even reduce air polution too. This Ctalizer i will recomnder for motocycle enthusist View detail
Let's put it on.
It is very effective Large. First of all, however, the smallest turning radius becomes large due to the body contact stopper, and it is necessary to turn around when turning in narrow parking lots, etc. There is no problem in driving itself.
Single-cylinder vibrations transmitted to the handlebar are reduced, making driving easier.
It is now safe to enter a rough Curve with a Gap.
It looks like a body on a top ranking.
The construction is beautiful and satisfactory for a cut-out plate.
If the price is acceptable, we recommend that it be installed.
View detail
![[F.C.C. x JOSHO1] SPORTS CVT](https://img.webike-cdn.net/catalogue/images/99535/165390413_TS.jpg)
For the first time Pulley
Quantity from NORMAL's mellow:Just by replacing a set of sets, you can run comfortably.
The Lightweight Pulley Boss can also be replaced for even better response.
View detail
JetSetting
Since it is a KEIHIN OEM, it is safe to use.
I lost it and purchased it, even though I adjust it based on temperature and humidity.
View detail
![[Mr Quick] Taillight Garnish](https://img.webike-cdn.net/catalogue/images/132620/mr19-mo02-01_TS.jpg)
Easy to customize
Double-sided tape is all that is needed, so anyone can easily attach it.
The price is cheap, so I bought it thinking it would be okay if it failed, but it feels and looks great!
View detail
Pre-cut and inexpensive
I usually buy rubber mats and cut them, but this product is pre-cut and at this price, so there is no extra hassle.
Grip is also good.
View detail
Excellent visibility
This one is used for CRF250RLY50 MOTARDSpec.MD44 and my car Swift Sports31s
It is inexpensive, highly visible, and the cap is easy to remove, so it is great for Small students who check their air pressure frequently.
My only regret is that when I purchased this item from Webig, it was somehow shipped as a Single Item, even though I requested that it be combined with an order that was waiting for another item to arrive.
I was very irritated that I had to pay a ridiculous shipping fee for an item that cost less than 100 yen.
View detail