Reviews
I was lost in the installation.
I didn't realize that you just put it over the OEM Radiator cap and remove the OEMCap?
If you just cover the top, that's fine, but a simple Instruction Manual would have been nice.
But Visual is satisfied.
View detail
Position is good
This product, which is squeezed with The Same Shape as OEM, improves the HandlebarFeel, which makes the OEM's shoulders stick out.
However, if you have a BEET Handlebar or something like that in front of it, the Large body may use the EFFEX Handlebar weight. However, this Handlebar cannot be used with EFFEX. You have to use a short bar weight. I was not aware of this and ended up having to cut a tap on the inner parts of the handlebar weight and add an OEM handlebar end.
View detail
It's great!
I rode for half a year in OEM and there was no dissatisfaction there, but I wanted to change Handlebar for trial, and I was troubled with Musashi Kai, and chose this one because Logo was cooler in ARCHI.
In my opinion, the Position is exquisite and super easy to ride!
It's so easy to go anywhere as long as you don't have ass pain.
Especially when curving, the OEM hand length was quite tight, but thanks to the aperture, there is a little more room and it is very easy to bend!
Handlebar should still be changed!
I was worried about Polish, but Black is cool and I recommend it.
I am 5'9" 169, weigh 59, and have normal or slightly short hands.
View detail
Great
These bars changed my riding position. Made for a more comfortable ride. Quality finish, will not except stock bar ends is the only thing I don't like. Installed universal bar end caps. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Looks great, but...
It looked good after I put it on.
but I don't know if this Fender Eliminator is affecting it or not, but it started to get dirty under the Seat with things like dust and Tire refuse.
The work Instruction Manual is difficult to understand.
There are official installation instructions on YouTube, but since they are taken with a pull, it is difficult to see them while viewing on a phone.
I think some familiarity is required for installation.
View detail
Difference from OEM Color
I purchased this for my SE, but the yellow color is different from the OEM color, which is a darker yellow. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
This product is made of steel and has rigidity
This product is made of steel and has rigidity Color expression of neat anodizing The edge has a very high finish. It is compatible with archi's long tail. Because of the fenderless, the angular beauty of the longtail is revived. Because of various service holes on the side, it is easy to install rear cameras Because the location of the hall on the license plate is different in Korea, A separate number plate is required. View detail
A much more comfortable position than stock
I prefer the product of archi. Subframes, back steps, long tails, fender kits, etc Backstep isn't hard enough to change by yourself However, since the vibration is close, you have to do a strong bolting well. It is also satisfactory because the edge finish of the product is much higher than that of Chinese products. After using it for a certain period of time, Back steps on the calves when reversing are much less than genuine products. I'm satisfied with the design I think it would be better if the anodizing was strong. View detail
it's cool
If you follow the instructions, installation is very easy. Certainly less worry about warping. The finish of the product's edge is also superior to that of Chinese products. The color of the subframe is in harmony with the pure se front fork. It's satisfying. View detail
looks good
The installation is relatively simple. Remove the seat and simply remove the cowl, assembly complete. I ordered archi long tail and fenderless kit together The balance is very good. But if there's one thing I want, the clear layer will be a little bit more I hope it's thick. The installation of the long tail adds to the beauty of the bike. View detail
If you like Short Tube, Recommendation
Is the delivery time no problem in this day and age? I waited 5 months.
I think the design is perfect, and if you like Short Tube, you'll love it.
The R of the exhaust pipe is also beautiful, and it is thinner than YOSHIMURA and others, and above all, Short is by far the best Parenthesis!
The sound is a JMCA Correspondence product, but I think it will be very different.
From Idling to Whoa! I thought.
I like the sound of 3000-5000 best.
Workability would be tough for one person.
I ignored the instruction manual and assembled it while holding it down with Tapeetc. I think two people are needed to assemble it according to the Instruction Manual.
You commented that it rusts easily, but iron is a natural.
If you are concerned about rust, apply a coat of rust converter, etc., and then apply a thin coat of YOSHIMURA's heat-resistant spray or the like over it.
View detail
Sub-frame
It was quite gaudy. The color was not what I expected. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
I think Parenthesis is definitely better than OEMOption Parts.
I especially liked Logo and was torn between Black and Silver.
The black color gives a sense of luxury, and I am glad I chose black.
Performance as a Core guard will be sufficient.
Installation is easy with the included parts.
View detail
Favorite Brand
I've always thought master caps were parts to be replaced.
I was wondering which Manufacturer to choose when I found this product.
I chose this one because it was also my favorite Brand!
Nothing wrong with the Size and texture.
View detail
A little squeeze
Position is good, but I wanted more height and aperture. I like that it's not tiring. View detail
Lacquer BlackPlating is good.
I bought a long tail from the same Manufacturer and thought the OEM Product would not fit. It was worth the wait of about 6 months.
I was worried about the lacquer BlackPlating because the delivery date was progressively delayed, but it finally arrived.
The installation was completed without any difficulties after reading the instruction manual.
I still think it looks better than the Silver color.
I'm lucky that the price has now gone up from when I ordered it. So far it is working well with no problems.
View detail
Lacquer BlackPlating
I like the beautiful black plating, and since it is the same color as the Mirror, I am glad it is balanced. View detail
z900rs Rear Fender
The design and texture match my taste, and I think Archi products are very suitable for z900rs, although they are also sold by other Manufactures. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS
Radiator core guard
I have changed my motorcycle for many years, but this is the first time I have installed a Radiator guard.
I think the Design and the position of the Logo is very good.
View detail
Overall, I'm satisfied
Looks Large satisfactory.
However, the included Screw rusts quickly, so you need to find out the Size and replace it yourself.
View detail