Reviews
I'm glad I bought it
The texture is not rigid or poor and the paint is beautiful. The installation of this product has removed the balance of the tail section, which the OEM thought was too short, and has made it look very cool. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Long driver required for installation
Long tail and this product in Quantity:Purchased as a set
I am an amateur and was able to install it smoothly, but as the Title says, a long driver is required.
I was fortunate enough to have one, so I was able to install it without any problems, but if you don't have one, I suggest you get a Long driver before installing it.
After installation, the Tail and Fender are gone, and the Refreshing and Parenthesis is good.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
For short stature.
I bought a Motorcycle and have not had a standing stall for 4 years, but I decided to buy it because I had a standing stall from an unexpected stall.
I thought that 20mm of lowdown wouldn't make much difference, but it did, and now I can ride safely with both feet on the ground!
The front fork was also extruded 20mm to match the rear.
Highly recommended for short Rider.
View detail
Installed on a 2019 Z900RS
I had installed Kawasaki OEM Radiator core guard, but when riding in the rain or on wet road surfaces, the center of the Radiator was dirty with small stones, mud, etc. on the top and bottom. Also, because the mesh of the core guard is large, the core was often clogged with small stones and other debris. This Radiator core guard has a smaller mesh at the center and a smaller mesh on the SIDE compared to the OEM, making it much harder for small stones, etc. to get into the core. However, the attachment to the Radiator is not as solid as the OEM, and the upper side only hooks onto the Rubber, and the lower side is only Bolt1 pc, which is a little worrisome, but it is not unstable, so I am satisfied with it. It looks better and Parenthesis is better. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
ARCHI Fender Eliminator Kit TYPE-3
About quality and texture Strong stainless steel texture with smooth Matt surface About the feeling of use Looks great after installation. Short and clean looking. Products to buy together Archi long tail rear fender with Doremi signal lights. Difficulty of installation Removing the original takes long time then installation. Easy to install and remove this product. Total time is about 20 - 30 minutes Cost performance and comparison with other products Price is a bit steep but cheaper ones are available. But satisfactory with the price is this design product?. About shipping and packaging Shipping price is as item is not huge as well. Package with box brown paper wrapping. Any concerns, cautions, or advice when purchasing Comes with license plate holder, but it's a bit small for the countries. Original license plate light can be installed with original reflector too. View detail
For a little Accent
The product is completely for appearance only, but it gives a Custom feel.
It would have been better if it were a little cheaper.
I am satisfied.
View detail
Quality item.
This is only a radiator cap cover. It sits over the stock radiator cap and is secured by a longer screw and also a set screw 180 degrees away from the original screw location. Item seems very well made and is a good cosmetic upgrade. View detail
Posture became easier.
The OEM handlebar had a slightly forward leaning posture and a wide width characteristic of the Large type NAKED, but this handlebar has been replaced by a handlebar that is slightly raised and narrower in the front, making it more comfortable to ride.
I have only been on it for about 5 minutes, so I don't know about long distance, but long touring using the highway will be easier.
However, a lot of Curve on the pass, continuous Curveetc. is going to change the ride.
Since it is an Exclusive Handlebar, the holes are drilled without the need for drilling, so a person who is familiar with the process can replace it in 30-40 minutes.
For me, if I don't get tired on the street or long, it's good.
View detail
De Fault's Injection cover was fitted because it looked like it was floating in the Silver color.
The moist matte finish will give it a very nice atmosphere. Installation is done with the included double-sided tape, which is simply placed over the top. The double-sided tape is included in the package, so it is possible to put it back on. View detail
Good texture?
The product was exactly as shown in the Image and the dimensions were perfect. It is easy to install and comes with double-sided tape. The double-sided tape is also included. I highly recommend this product. View detail
Look so good!
It fits perfectly with the existing product and the color itself is different. A product with an incredible dress-up effect! Highly recommended.
It fits perfectly with the existing product and the color itself is different. A product with an incredible dress-up effect! Highly recommended.
It fits perfectly with the existing product and the color itself is different. A product with an incredible dress-up effect! Highly recommended.
-------------------------------------------------- -------- It is perfect for existing products and the color itself is different. A huge product of dress up! I highly recommend it. It is perfect for existing products and the color itself is different. A huge product of dress up! I highly recommend it. It is perfect for existing products and the color itself is different. A huge product of dress up! I highly recommend it. Powered by Google Translator
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
SlightRear Fender
Purchased together with a long tail cowl from the same manufacturer.
It also serves as the back mount for the tail lamp and the Fender Eliminator Kit, and the product accuracy, fit, design, and texture are all perfect and of OEM product quality.
I did not use the included base plate because I did not intend to use an OEMReflector.
It takes a little hang to install the blinker, but I was able to install it smoothly because I prepared a Phillips Screwdriver of long length in advance.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Quantity:Glad to see the Set!
If the Link Plate is used only for Lowdown, the car body will rise up when the Side Stand is applied, making it easier to fall over.
This is a quantity of 20mm Lowdown Link Plate and -20mm Short Stand compared to OEM:It is a Recommendation for those who are worried about their footing as it is a Set.
Installation should be easy if you can do light maintenance.
The Short Stand has the same quality as OEM products, and the Lowdown Link Plate has a subtle ARCHI logo on it, both of which add to the high quality feel.
View detail
Long tail cowl was the only choice.
This one could have been OEM. The design of Balance is so good that I think it could have been OEM.
I also thought the modeling and coloring were of high quality.
Installation is very easy if we talk only about long tail cowl.
At the same time, I installed a SlightRear Fender, but I think this one needs a longer plastic drum and hang.
View detail
OEM-like Chromium Plating
We had been using a rear mount when installing a long tail cowl for a model with an OEM grab bar from the beginning, but we were a little dissatisfied with it, so we replaced it with this product.
The OEM Grab Bar + rearward mount has no problem in itself, but the gap between the long tail and the bar is narrow and makes it difficult to grip the bar.
Another reason for the replacement was that the thin and low OEMGrab Bar looked poor compared to the long tail cowl.
This product is designed to match the thickness and angle of the pipe with the company's long tail cowl, so it looks well-balanced and easy to grip.
If you are using an ARCHI long tail cowl and are considering installing a grab bar, we recommend that you install the same ARCHI grab bar.
There are three different color patterns to choose from, so I think it is a good point to be able to select one that suits your taste.
View detail
It gives a sense of cohesion and unity.
In addition to this product, I have installed a long tail cowl and a special grab bar made by Archi, and I think that the total effect is to make the rear area look more cohesive and to reduce the feeling of being too small.
After much deliberation, I chose the Carbon ones, which were more natural than I had expected and did not make more of a statement than necessary.
I found the product precision to be good and the design in line with TireArch to be excellent.
It was smoother to install the footpeg after removing the bolt that holds the Tandem Footpeg and the Silencer.
View detail
I think it is matte black and calming.
I think it is a good color for Z900RSBlack. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Archi Harness protection for Archi front sprocket cover
About quality and texture Glossy carbon fiber material. Feels very light. About the feeling of use Looks well. Looks more neater without the wires and tubing exposed. Products to buy together Archi Front Sprocket Cover. Difficulty of installation Have to remove the Archi front cover and gear shifter support when installing. It took a while to remove it. But installing is only a few minutes. Cost performance and comparison with other products Expensive for a small item. But it's carbon fiber so that why the steeper price. About shipping and packaging Well bubble wrap with box. Any concerns, cautions, or advice when purchasing To purchase together with the Archi Front Spocket and install it at the same time. So you no need to remove it, To install it. View detail
Archi Clutch Cover
About quality and texture Feel solid. Nice polish sliver lines on the cover About the feeling of use Great retro look cool lines which you can find on older generation motorcycle Difficulty of installation Takes less then 15 mins. Easy to install just make sure the correct screws are fitted. Cost performance and comparison with other products Price a bit steep compared to others but for the looks and the quality it's worth it I guess. About shipping and packaging Well wrap with thin sponge wrap and comes with a box. Shipping is ok price. Any concerns, cautions, or advice when purchasing Looks great no concern at all no worries in purchasing the item. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Impression
I was looking for a z900RS with an integrated FenderArm and the design was good.
Overall, the tangerine skin of the Clear coating is noticeable.
If you can do it, it will be much better if you repaint Clear and apply mirror finish.
Compared to other Manufacturer's carbon parts, the overall black color seems to be less intense.
I felt that the mesh on the reverse side was poorly processed, even though it is not visible once installed.
View detail