Reviews
ARCHI Radiator side rod
About quality and texture High quality aluminum material finishing. I bought the gold rods version, it look like it doesn't then to fade overtime, but time will tell I guess About the feeling of use Feels heavier the the stock covers but the looks brings out the retro looks at the side of the bike. Difficulty of installation It tools only 30 mins or less. Just have to wonder where is the top or where is the bottom as the there is no instruction given. But it take only a while to figure it out. No issues. Cost performance and comparison with other products The quality is at the top range by Archi. Only product available currently as the other brand with the same design is out of stock. The rest of the other design covers maybe cheaper by the outlook is not there. About shipping and packaging Shipping is not costly. Item is placeed with vinyl bag. I hope there's more protection for the product as the black plates have some scratches at the edge. But after installing it's not visible. Any concerns, cautions, or advice when purchasing The weight of the product is heavier then the stock cover. But only worry is the weight may cause pulling on the radiator bracket. But if it's by Archi I guess it's already consider it and made precaution to it. Initially I thought that my additional radiatior cap will restrict it. But no worries to it. As it fits perfectly as shown on my picture. View detail
Design is good, but... It didn't help me prevent buttock pain.
I was looking for a Seat with the primary purpose of preventing OEMSeat buttock pain.
It is a personal feeling, but the conclusion is that it has no effect on preventing buttock pain.
On the contrary, my butt hurt faster than OEM.
The OEM could sit for an hour to an hour and a half, or about 100 km in distance, without discomfort, but with this Seat, by the time an hour passed, I felt discomfort in my buttocks, which soon turned into pain.
Please note that the sensation varies from person to person and is for reference only.
I think the design looks good and the quality of the product is good.
The impression is hard, as you cannot tell by touch if there is any Gel in it.
No change in footing was felt for the 20mm ankle extractor.
What I was looking for was a soft and absorbent Seat, so it is the exact opposite.
I will consider other Seat after using it a little more.
Point that I decided to purchase this time
Price, with Gel, Tuck roll, 20mm Anko (bean paste)
My greatest expectation was for a Gel, but I was disappointed.
(What kind of Gel is in it?)
The effect of footing improvement by 20mm Anko removal is unknown.
Tuck roll design is GOOD.
It would have been a great cosmetic product at this price if it eliminated the buttock pain, but alas.
View detail
Tuck roll
I drove about 300km and I wished I had bought it earlier because it didn't hurt my butt so much and looked better than the OEMOPHigh seat.
Seat back is also almost like OEMSeat, inside front side. (where Gel Zab and Sponge are located) The "Seat" is also waterproof, which I thought was well thought out. A tool was also attached to the back.
When installing it, it feels a little too snug and a little tight.
(Archi, it's in long tail).
I had a hard time putting on the Tandem belt by myself… I have a grip strength of about 52kg, but it was tough to fix the bolt while pulling it.
View detail
![[Closeout Product]Master cap ver.Z Front[Webike only][special price]](https://img.webike-cdn.net/catalogue/images/118983/189WB3151_TS.jpg)
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Master cap
Just by replacing it, it looks and feels better. Good texture. View detail
The quality of the product seems good.
We chose this product for the purpose of dress-up because the OEM headlight is a little dark.
Considering the power consumption, we used LEDs from Sphere Light instead of Halogen bulbs from Included Parts to improve the appearance and brightness.
As for installation, I think it would be easy if you read the Instruction Manual carefully.
However, the optical axis adjustment is Quantity:Pair (for Left and Right) The LED bulbs can be adjusted in terms of brightness, so it is now possible to upgrade the level from the OEM product.
I think it is possible for those who are considering purchasing this product since it was not chosen for the old corporate style but for the purpose of increasing brightness.
Please note that this is a personal opinion and should be used only as a reference.
View detail
The surface is ….
I bought Black Gail and painted it myself, but the Surfacer was Large weird because there were too many bumps on the surface. I wish the QUALITY was a little higher. View detail
Style is outstanding, but 、、、、
[How is it used?
The OEM Seat of Z900RS is famous for butt pain Seat, so we replaced it with DOREMI Seat once and the butt pain was solved, but it became a little high seat and the style was too bulky, so we replaced it with Archi Seat without bean paste and with Gel Seat.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
The DOREMISeat had some rattling, but the Archi Seat was able to fit snugly.
How was your experience with it?
The texture of the outer skin is good, and the feeling of pressing with the fingers is also very sticky, so I used it with high expectations, but the footing was not improved much compared to OEMSeat, and the cushioning was not so good for the GelSeat included. I didn't get butt pain after about 2 hours test ride, but after a little longer ride, it might be painful. （I did not get butt pain after about 2 hours of test riding, but it would be painful after a longer ride (somewhat better than the OEMSeat).
[Included Parts:were they on?
Seat belt and tacks are optional parts.
I'd like to see it included as standard.
View detail
It's fine without it, but it's not tight enough without it.
[How is it used?
Mounted on Archi's Seat
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
Not difficult, but since the length is Limit, Bolt tightening while pulling a little.
How was your experience with it?
Without it, Seat's Balance looks bad.
[Included Parts:were they on?
Mounting Bolt only
[Was there anything that disappointed you?
Nothing in particular, but I wish it had been included instead of sold separately.
View detail
ARCHI Change Rod Retainer
Package landed safely.packing tiptop.item is well built and solid.shifting is smoother than before..highly recommend.thank you team webike.more purchase to come.shop with ease with webike. View detail
too long a delivery time
It took more than half a year to receive my order. It seems to be a Taiwanese manufacturer, but even so, the delivery time is too long. The paint is too thick on the shaft screws and frame engagement area, so it does not move smoothly even after installation. The grounding part is the same shape as OEM, so there is no problem with stability.
When removing the Spring, you will have no trouble if you pull out the Bolt first and then remove the Spring. 。 *No instruction manual of any kind.
View detail
We recommend fitting this product.
Think about the flat front, It's not cool without this 'kawasaki' bracket. You can remind others what kind of bike I am anytime, anywhere. The downside is that the horn becomes smaller. But don't worry, our riders won't use their horns. View detail
I put it on because I made a Fender Eliminator.
I customized it at the same time as the Fender Eliminator, so I don't know how much mud it splashed before the change, but it was probably better than the NORMAL. The back and the License Plate were just about sloppy on wet surfaces, but I don't think it splashed on my back. The RearSeat has some spots of mud on it. View detail
Nice touch!
The Tail is much brighter and I am happy with it! View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RSCAFE, KAWASAKI Z900RS, KAWASAKI Z900RSCAFE
I don't feel much.
I don't feel it much. I don't feel a huge change in the gear shift. I feel like the gear stops significantly when I go up from 1st to 2nd. View detail
the best dress-up item
This product makes z900rs look better at a reasonable price. I've been running 3 units of z900rs, and I always have them fitted every time I buy them. View detail
the best dress-up item
Owns 3rd generation of z900 rs, this is a must-have for purchase. Very good dress-up effect at low prices. Highly recommend. View detail
I'm not that happy for the price.
It's a little bit longer. There's a dress effect where the body looks a little bigger, but there's no significant change in appearance. I'm not that happy for the price. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
I'm not that happy for the price.
It's one of the parts for mounting the long tail. I think it can also be used for the genuine tail. It feels a little lighter compared to the genuine tail. View detail
It got easier to ride
The Black makes it look tighter and easier to ride with a more comfortable posture. View detail
If you choose Simple, this is the one.
I was looking for something simple and simple from a proper manufacturer, but I didn't want something with a design such as a manufacturer's logo.
As expected
View detail