Reviews
I put it on because I made a Fender Eliminator.
I customized it at the same time as the Fender Eliminator, so I don't know how much mud it splashed before the change, but it was probably better than the NORMAL. The back and the License Plate were just about sloppy on wet surfaces, but I don't think it splashed on my back. The RearSeat has some spots of mud on it. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
I'm not that happy for the price.
It's one of the parts for mounting the long tail. I think it can also be used for the genuine tail. It feels a little lighter compared to the genuine tail. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Large presence
Without much study, I decided to purchase Fender Eliminator, feeling that the higher the price, the better.
But now I don't like it because I see too many extra Frames.
My feeling is that Fender Eliminator must be Simple.
License Plate Light is also too Large and thick.
I can't change it to something different because it was too expensive.
View detail
Cool!
It looks so much better!
It is easy to install and looks great!
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Long driver required for installation
Long tail and this product in Quantity:Purchased as a set
I am an amateur and was able to install it smoothly, but as the Title says, a long driver is required.
I was fortunate enough to have one, so I was able to install it without any problems, but if you don't have one, I suggest you get a Long driver before installing it.
After installation, the Tail and Fender are gone, and the Refreshing and Parenthesis is good.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
ARCHI Fender Eliminator Kit TYPE-3
About quality and texture Strong stainless steel texture with smooth Matt surface About the feeling of use Looks great after installation. Short and clean looking. Products to buy together Archi long tail rear fender with Doremi signal lights. Difficulty of installation Removing the original takes long time then installation. Easy to install and remove this product. Total time is about 20 - 30 minutes Cost performance and comparison with other products Price is a bit steep but cheaper ones are available. But satisfactory with the price is this design product?. About shipping and packaging Shipping price is as item is not huge as well. Package with box brown paper wrapping. Any concerns, cautions, or advice when purchasing Comes with license plate holder, but it's a bit small for the countries. Original license plate light can be installed with original reflector too. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
SlightRear Fender
Purchased together with a long tail cowl from the same manufacturer.
It also serves as the back mount for the tail lamp and the Fender Eliminator Kit, and the product accuracy, fit, design, and texture are all perfect and of OEM product quality.
I did not use the included base plate because I did not intend to use an OEMReflector.
It takes a little hang to install the blinker, but I was able to install it smoothly because I prepared a Phillips Screwdriver of long length in advance.
View detail
It gives a sense of cohesion and unity.
In addition to this product, I have installed a long tail cowl and a special grab bar made by Archi, and I think that the total effect is to make the rear area look more cohesive and to reduce the feeling of being too small.
After much deliberation, I chose the Carbon ones, which were more natural than I had expected and did not make more of a statement than necessary.
I found the product precision to be good and the design in line with TireArch to be excellent.
It was smoother to install the footpeg after removing the bolt that holds the Tandem Footpeg and the Silencer.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Impression
I was looking for a z900RS with an integrated FenderArm and the design was good.
Overall, the tangerine skin of the Clear coating is noticeable.
If you can do it, it will be much better if you repaint Clear and apply mirror finish.
Compared to other Manufacturer's carbon parts, the overall black color seems to be less intense.
I felt that the mesh on the reverse side was poorly processed, even though it is not visible once installed.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
For ArchiSlightRear FenderLong tail
I was able to Custom it with no problems. If you are installing an Archie long tail cowl or Archie z2Tail lamp, definitely buy this. View detail
Archi Rear Fender
About quality and texture Hard plastic material used. Feels like able to restand small pebbles. Some scratch marks noted when item is received as it is not painted. I wrap with certain area with sticker. About the feeling of use Able to reduce splashes more then the stock fender. Difficulty of installation About less then 20 minutes. But my mechanic had to remove the exhaust muffler as one of the screw in hard to reach. Cost performance and comparison with other products Price is reasonable compare with the rest of the non painted fenders out in market About shipping and packaging Comes in a big box so shipping price is expensive. Well wrapped in plastic bubbles and paper. Any concerns, cautions, or advice when purchasing. Expect a few scratches on the item as it's not painted. There are design holes for easy lubricantion and cleaning on the chain guard area View detail
Couldn't order due to System inconvenience.
I couldn't order because the Security was locked or something!
Please don't introduce such System!
View detail
Steady making
I had an experience with an Aluminum Fender Eliminator on another car and the vibration caused a crack on the number mount, so I decided to use this product.
Installation is also easy. I thought it was unstable because only one side of force can be applied around the axis with the Ratchet.
Well, that may be experience and skill in that area.
The product description said it was about the same weight as the NORMAL, but … I'm not sure.
It is quite heavy. You can clearly see it. But it may be good if you think that it is well made for the cost.
View detail
Top Quality Carbon Fiber & Design
The Archi V.2 has an excellent carbon fiber twill finish. Its shape and size complement my Z900RS, while adding extra coverage against tire spray. Fitment is very easy, with perfect symmetry when mounted -- this is very pleasing to my eyes! Despite the extra fender length the Archi V.2 is slightly lighter than the oem piece. I always take my time to consider the right parts for a motorcycle, and this part delights me! Thank you Web!ke Japan for 5-star professional customer service, I think you are best on Earth! View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
No complaints about both Design
Front Fender is available from various companies, but we decided on this one without hesitation.
Carbon is also good.
I have nothing to complain about with it on.
Fitting is also no problem.
I changed it to Titaniumium Bolt and put it on.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
ARCHI:ARCHI Front Fender
ARCHI:Archi
Front Fender installed.
It was tightened up.
I like the SIDE mesh.
View detail
Rear Fender ver.2 installed.
I had been satisfied with the Fake Carbon fender, but by changing the Front Fender to ARCHICarbon Front Fender, the Rear was also changed to Real Carbon.
Clearance with the rear tire and center as a chain case are perfect, and there is no twisting and high precision.
The shape of the rear end is the same as the front fender end, which is good.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Front, Rear and O-solo.
To be honest, I was worried about A-TECH Carbon rear fender. However, A-TECH takes a long time for delivery, so I decided to go with PMC ARCHI Carbon rear fender because it has the same design as the Front Fender, and the delivery time is quicker.
LusterLusterCarbon is naturally reliable Quality.
The edge treatment, drilling process, and fluffing of the Clear layer is a concern, but deterioration from this point on is unavoidable.
I guess we will have to be careful with direct sunlight.
Installation will be done later. (o^^o)
View detail
ARCHI:ARCHI Rear Fender ver.2
PMC ARCHI:ARCHI with Carbon Front Fender and O-solo
Rear Fender ver.2.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
LusterLusterCarbon????
Twill Weave Carbon Black mesh with holes
The best? (Lol)
In the meantime, I did Glass coating.
Looking forward to installation! (*´艸`)
View detail