Reviews
It's fine without it, but it's not tight enough without it.
[How is it used?
Mounted on Archi's Seat
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
Not difficult, but since the length is Limit, Bolt tightening while pulling a little.
How was your experience with it?
Without it, Seat's Balance looks bad.
[Included Parts:were they on?
Mounting Bolt only
[Was there anything that disappointed you?
Nothing in particular, but I wish it had been included instead of sold separately.
View detail
I put it on because I made a Fender Eliminator.
I customized it at the same time as the Fender Eliminator, so I don't know how much mud it splashed before the change, but it was probably better than the NORMAL. The back and the License Plate were just about sloppy on wet surfaces, but I don't think it splashed on my back. The RearSeat has some spots of mud on it. View detail
Looks good!
I think it is good because it is easy to tighten up the look just by putting it on!
Just a little cheaper would be nice lol.
View detail
Seat belt
The design of the Bracket is better than that of the NORMAL Belt, with more decoration. View detail
Size is perfect and easy Custom!
Although the Parts can easily be used as they are.
Version up by wrapping or painting!
These are the same Parts as OEM. They also look the same!
View detail
ARCHI Stem Steel Emblem & Mount stay set
Was the one you received as per Image? The product was exactly as shown in the Image.
Was the installation difficult? It was easy to install.
How was your experience with it? No problem, sir.
[Included Parts:were they on? No problem, sir.
[Was there anything that disappointed you? No problem, sir.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Long driver required for installation
Long tail and this product in Quantity:Purchased as a set
I am an amateur and was able to install it smoothly, but as the Title says, a long driver is required.
I was fortunate enough to have one, so I was able to install it without any problems, but if you don't have one, I suggest you get a Long driver before installing it.
After installation, the Tail and Fender are gone, and the Refreshing and Parenthesis is good.
View detail
Arch Long tail cowl
You are right to buy Archi rather than DOREMI. z2Tail lamp and SlightFender Eliminator Kit are also Quantities:If you buy from Set, you can work on it without worrying. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
For ArchiSlightRear FenderLong tail
I was able to Custom it with no problems. If you are installing an Archie long tail cowl or Archie z2Tail lamp, definitely buy this. View detail
Archi Rear Fender
About quality and texture Hard plastic material used. Feels like able to restand small pebbles. Some scratch marks noted when item is received as it is not painted. I wrap with certain area with sticker. About the feeling of use Able to reduce splashes more then the stock fender. Difficulty of installation About less then 20 minutes. But my mechanic had to remove the exhaust muffler as one of the screw in hard to reach. Cost performance and comparison with other products Price is reasonable compare with the rest of the non painted fenders out in market About shipping and packaging Comes in a big box so shipping price is expensive. Well wrapped in plastic bubbles and paper. Any concerns, cautions, or advice when purchasing. Expect a few scratches on the item as it's not painted. There are design holes for easy lubricantion and cleaning on the chain guard area View detail
Steady making
I had an experience with an Aluminum Fender Eliminator on another car and the vibration caused a crack on the number mount, so I decided to use this product.
Installation is also easy. I thought it was unstable because only one side of force can be applied around the axis with the Ratchet.
Well, that may be experience and skill in that area.
The product description said it was about the same weight as the NORMAL, but … I'm not sure.
It is quite heavy. You can clearly see it. But it may be good if you think that it is well made for the cost.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
High quality.
[How is it used?
Very good
Was the one you received as per Image?
It is more luxurious than Image.
Was the installation difficult?
Pin stuck.
How was your experience with it?
Very good
[Included Parts:were they on?
It came with a Clear Seal for protection.
[Was there anything that disappointed you?
I couldn't get the Pin out.
[Note]
When removing pins, it is better to cure the product and the tank cap.
View detail
Well, good!
The material color is black, and it is an unpainted product. It is
Therefore, it is not pure Black.
If you just want to Black this place, buy it.
The others are expensive and a pain to install.
The accuracy of the puckering is excellent, but double-sided tape looks like it should be Plus.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
It is a good salve.
Initially, I was told that it would hit the Tank and scratch it, so I waited until a replacement arrived, but it finally arrived and I installed it immediately.
Punch used 3mm, and after hard hammering it out, it was finally replaced, and the Bolt was also changed to Titaniumium black since it was Black.
It feels a little hard to close the fueling port.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
one's presence (as felt by others)
The quality is excellent and it is outstanding as dress-up parts. Conversely, other surrounding parts have no choice but to match this product. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Looks great, but...
It looked good after I put it on.
but I don't know if this Fender Eliminator is affecting it or not, but it started to get dirty under the Seat with things like dust and Tire refuse.
The work Instruction Manual is difficult to understand.
There are official installation instructions on YouTube, but since they are taken with a pull, it is difficult to see them while viewing on a phone.
I think some familiarity is required for installation.
View detail
Lacquer BlackPlating
I like the beautiful black plating, and since it is the same color as the Mirror, I am glad it is balanced. View detail
Long tail
Cool. I just wish it was a little less expensive. View detail
Long tail
It looks very SMART and calm.
I'm a little concerned about the gap between the Tail…
But having it is better than not having it!
View detail
900RS cafe Long tail cowl
I have purchased many parts from PMC in the past, and this time, because I am waiting for my RScafe to be delivered, I have not installed the parts yet, but I purchased the parts first. However, when I looked at the painted surface from different angles under the LED fluorescent light, I saw a 5cm wide and 2cm high mark&infinity-like mark on the left side center side that was visible after the paper had been applied. Steps in the painted surface.
I am not sure if I will return or exchange the item because it is not there, but I am a little disappointed and would like to see a better inspection.
I tried several times to take pictures, but I couldn't attach them because I couldn't get a good shot with the way the light was hitting me, but there are some details
If you don't mind, we can make a recommendation.
View detail