Reviews
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, SUZUKI TL1000S, KAWASAKI ZX-9 R, KAWASAKI ZX-6 R, KAWASAKI ZX-12 R
One point
One point and OEM were rusted and discolored, so they were replaced. I think it is stylish and good. I think it is also somewhat lightweight. View detail
Nice
FrontQuantity for ZrX1200 DAEG:I chose Gold color, but Titanium color would be also good. The gold color might be a little too conspicuous. View detail
Fits: HONDA CBR600 RR, HONDA CB400 SF, HONDA CB400 SB, HONDA CB1300 SF, HONDA CB1300 SB, HONDA XL700 V TRANSALP ABS, HONDA XL700 V TRANSALP, HONDA XL1000 V VARADERO, HONDA VTR250, HONDA VTR1000 SP-2, HONDA VTR1000 SP-1, HONDA VFR1200 F, HONDA VFR1200 F DCT, HONDA CBR954 RR, HONDA CBR600 RR C-ABS, HONDA CBR600 F4i, HONDA CBR250 R 10-13, HONDA CBR1000 RR, HONDA CBF1000 ABS, HONDA CBF1000
A few years after installation
A few years after installation
The color is Gold.
The fading is great.
You were a bimoldka in the beginning.
It's starting to look like a Brown envelope.
If you like the color and buy it.
We recommend that you buy again regularly.
View detail
Fits: YAMAHA YZ450 F, YAMAHA YZ426 F, YAMAHA YZ400 F, YAMAHA YZ250 F, YAMAHA YZ250, YAMAHA YZ125, YAMAHA WR450 F, YAMAHA WR426 F, YAMAHA WR400 F, YAMAHA WR250 F
Some processing is required.
The use is not Race, but it was not attached with Bolt On. it interferes with the Front Fork Guard restraint and can only be attached with Cut. View detail
Fits: KAWASAKI ZZR1400 GTR, KAWASAKI ZZR1400, KAWASAKI ZX-9 R, KAWASAKI ZX-6 R, KAWASAKI ZX-10 R, KAWASAKI ZRX1200 S, KAWASAKI ZRX1200 R, KAWASAKI ZRX1200 DAEG, KAWASAKI Z800, KAWASAKI Z750 ABS, KAWASAKI Z750, KAWASAKI Z1000 ABS, KAWASAKI Z1000, KAWASAKI VERSYS 650, KAWASAKI VERSYS 1000, KAWASAKI Ninja 650 R, KAWASAKI Ninja 400 R ABS, KAWASAKI Ninja 400 R, KAWASAKI Ninja 400 ABS, KAWASAKI Ninja 400
It's a beautiful Bolt.
Because the crystal is a beautiful bolt of one point, the tank cap area became gorgeous. There is no functionality, but I am satisfied with the appearance of Custom. View detail
It changes dramatically.
The color of the screen bolts changes the look and feel of the product. I would like to change the color of the bolts when I get bored. View detail
Fits: KAWASAKI GPZ900R Ninja
I'm sure things are good, but..
I bought a GPZ900R Radiator - Water pump for PMC I had more than half of it left over, probably because I had it on originally
Coolant spout to Radiator Hose was obviously not short enough to reach
View detail
Fits: KAWASAKI ZZR1400 06-08, KAWASAKI ZZR1400 ABS 06-08, KAWASAKI 1400 GTR 08, KAWASAKI ER6 n 06-08, KAWASAKI ER6 f 06-08, KAWASAKI VERSYS 07-08, KAWASAKI Z750 07-08, KAWASAKI Z1000 07-08, KAWASAKI ZRX1200 DAEG, KAWASAKI ZX-10 R 06-10, KAWASAKI ZRX1200, KAWASAKI ZX-6 R 07-08, KAWASAKI ZX9 R 00-03, KAWASAKI ZZR1200
Dress-up easily?
Dare to use GoldBolt on a Lime Green car View detail
Fits: KAWASAKI ZZR1400 06-08, KAWASAKI ZZR1400 ABS 06-08, KAWASAKI 1400 GTR 08, KAWASAKI ER6 n 06-08, KAWASAKI ER6 f 06-08, KAWASAKI VERSYS 07-08, KAWASAKI Z750 07-08, KAWASAKI Z1000 07-08, KAWASAKI ZRX1200 DAEG, KAWASAKI ZX-10 R 06-10, KAWASAKI ZRX1200, KAWASAKI ZX-6 R 07-08, KAWASAKI ZX9 R 00-03, KAWASAKI ZZR1200
I'm satisfied!
It is easy to install.！
I usually wear a Tank Bag when touring
It's an invisible Tank Bolt, but if you just change the Bolt in these hard-to-see places It looks different!
View detail
Fits: HONDA MONKEY
If the price is a little lower, it's a good choice
I used the same product Gold as this one
You can remove and put it on and off every time you do the setting
Because I applied a little force when I tightened it, I ruined a Screwball mountain
I'm going to re-purchase the blue one this time
Since DrivenSprocket spacer is also installed, this time without washer I'll install it
(I'm changing the Bolt, which is a little long, but when I put in Washer, it doesn't take until the end to get the Nut
View detail
Fits: HONDA MONKEY
Just the right amount of tightness!
We did a RearDrivenSprocket exchange for MONKEY
I had to remove and install it about 3 times because it was a little bit displaced
One of the threads was ruined because I tightened it too much
Material:It's Aluminum, so it's better to tighten it appropriately
I'm currently a Gold Sprocket and will buy Blue again
View detail
Fits: HONDA CBR600 RR, HONDA CB400 SF, HONDA CB400 SB, HONDA CB1300 SF, HONDA CB1300 SB, HONDA XL700 V TRANSALP ABS, HONDA XL700 V TRANSALP, HONDA XL1000 V VARADERO, HONDA VTR250, HONDA VTR1000 SP-2, HONDA VTR1000 SP-1, HONDA VFR1200 F, HONDA VFR1200 F DCT, HONDA CBR954 RR, HONDA CBR600 RR C-ABS, HONDA CBR600 F4i, HONDA CBR250 R 10-13, HONDA CBR1000 RR, HONDA CBF1000 ABS, HONDA CBF1000
It is not bad
I broke easily from my neck.. Aluminum so it may be useless, but it is brittle. I think that it is good for Dress-up as appearance after installation changes so much, but I feel it is higher than 3000 yen in Screw 7 books. View detail
So so
I'd like Carbon to be like Carbon, I hope it will be a bit cheaper if I'm cheap a little, I think it's ok, and a little later, I want a Luster, then a little more, AXIS will be a pity and I think it's cool. View detail
Fits: KAWASAKI ZX-9 R, KAWASAKI BARIUS II, KAWASAKI BARIUS, KAWASAKI GPZ750 R, KAWASAKI GPZ900 R, KAWASAKI KLE250, KAWASAKI KLE400, KAWASAKI ZEPHER 400, KAWASAKI ZEPHER 750 RS, KAWASAKI ZEPHER 750, KAWASAKI ZRX1100, KAWASAKI ZRX400, KAWASAKI ZXR, KAWASAKI ZZR1100, KAWASAKI ZZR400, KAWASAKI ZZR600
Is not it?
Because it was not a special hurry, purchase. Prices are the same as mass merchandisers. Rust started to be added to the previous one, so I replaced it. It is not possible without impossible, is not it? View detail
Fits: YAMAHA TZR250 R, YAMAHA XJR1200, YAMAHA TZR50 R, YAMAHA FZ6, YAMAHA FZ8 FAZER, YAMAHA FZ8, YAMAHA FZR1000, YAMAHA FZR600, YAMAHA SR400, YAMAHA SR500, YAMAHA SRX400, YAMAHA SRX600, YAMAHA TZM50 R, YAMAHA FZ6 FAZER, YAMAHA FZ400, YAMAHA FZ1, YAMAHA FZ1 FAZER, YAMAHA FJR1300, YAMAHA DIVERSION, YAMAHA XJR1300
There is no problem in function
I installed it in the SR 400.
Although I am using second-hand OEMRear Sets, my foot was slippery because my footpeg was slippery so I could not fix it.
Since it was said that other vehicles could also be installed, you can not fix it with Rightfootpeg raised like OEMRear Sets, so you need to change Kick Arm. You need to find a way to fix it.
We changed Kick Arm.
Regarding installation, if it is mounted as it is, it does not become perpendicular to the car body, and when looking from the front it turns into a backward letter so I cut it slightly.
Aluminum makes it easy to cut.
Footpeg itself demonstrates the performance as expected and is a firm feel for stepping on.
View detail
O-ring is ...
Mounting on YZ250F and Husq 's SM450R.
Although Husk was hard but could be installed easily, YZ person was muddy in Small Small in the hole of Air Screw or O - ring did not enter at all, painted oil and repeatedly TRY I did not enter after all but I removed the carburetor and cleaned it up. Separately this product is not bad But when using it for Motocrosser, let's do it after dropping mud dirt firmly
View detail
Fits: KAWASAKI NINJA2 Helmet50RR Z250 (13)
A little Dress-up
Used by Ninja 250R.
I used it in Dress-up around Tank.
Just attach the degreasing and pasting.
Because thick resin Coat is being done, I think that it will also prevent scratches.
Tank cap is a noticeable place even when on the ride, so it became a little Dress-up.
View detail
Fits: HONDA CB1300SB
somehow
It prevents the glare of Light from behind considerably.
It's the second time to paste, so this time I removed Mirror from the car body and stuck it, but after all I still have a little air left.
I thought about making the air easier because the dimensions are nearly kitchen, I cut the top by 1 mm Meter.
But it's too bad, so I can not go to Beauty.
If you have Rubber spatula, I think that it is easy to work.
View detail
Fits: その他
The Accent around Front
I purchased it because I wanted Accent around Windshield.
It is easy because it only replaces OEM's Bolt. Because the car body is Blue, I chose Red for Race ish Image, but I think that coloring is also good Accent.
However, as you are written in Impre, the price is high Neck.
View detail
Fits: SUZUKI RF900, SUZUKI GSF750, SUZUKI GSF1200, SUZUKI GSXR 1100, SUZUKI GSX400 Impulse, SUZUKI RF400
It was attached to CB 1300SB
After exchange, it is like Rear Sets Parenthesis is nice! Because I love Gold color, it is Gold color with Wheel, Suspension and Osolo, but Red was better. Kana? It is a bit shorter than NORMAL and Knee Slider is not attached, so the bank angle also increases considerably. But just 950 yen for Bolt is too high.
Replacement is super easy. So there is no Instruction Manual. Height on which foot gets on may be down by several mm.
View detail