Reviews
Theft prevention.
It helps to prevent theft of License Plate. Because it cannot be removed by ordinary tools, it is perfect for preventing mischief and theft, and the price is cheap, so it is inexpensive and effective for Security measures of License Plate. View detail
Cool. But …
I bought this Clutch lever and Brake lever because I thought Carbon parts are very cool.
It is Custom only in appearance. Functionality especially.
good point
It is cheaper than OEMLever and has a better design.
Carbon creates an atmosphere of something special.
Of course, it's pimped out.
A bad point
The carbon deteriorates quickly and becomes tattered.
Carbon is a material used to reduce weight, but it has no particular effect here.
I ended up switching back to OEMLever.
And if you polish it up with PIKAL, it's Polished!
This is one of the experiences that I failed to replace just because of the appearance and without thinking about later.
View detail
Fits: HONDA CBR954RR, HONDA CBR929RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CB400SB, HONDA CB400SF, HONDA CBR900RR, HONDA CBR600F4, HONDA CBR1100XX, HONDA CB1300SF, HONDA VTR1000 SP-2, HONDA VTR1000 SP-1, HONDA CB1300SB, HONDA CB1300ST
Does the color fade easily?
2800 yen for 7 screws is rather expensive, but the quality is not bad.
I'm afraid that the anodized finish might come off if I tighten the screws too hard.
If Carbon Seat etc. is attached to the tank cap, it may not be able to be installed without peeling it off.
(Due to the gap between the hole and Seat)
In addition, there is a feeling that the color is fading, and for the price ・・・・.
I found it quite satisfying when I just put it on. ・・・・
View detail
Fits: HONDA CBR1000RR(SC59)
The color's not what I was expecting.
I've ordered Blue metallic twice, both times Green Light for what it's worth.
This is Blue metallic or I give up.
View detail
Fits: HONDA JADE, HONDA JADE SLASH S
JADE 250 Engine bolt set
JADE 250 Engine bolt set
Quantity:Pair (for Left and Right) The Bolt on the Engine Cover is all Quantity:It was a Set.
It was more affordable than buying at Rose.
The price is a bit high, but it's a solid Bolt.
In addition, Instruction Manual, Hexagonal Wrench, and Grease are enclosed in the package.
I'll be using you again when I buy another Motorcycle Bolt set!
View detail
Very high quality Aluminum Nut
This is a very high quality Aluminum Nut.
I bought it as a Nut for fixing Sprocket because it is Recoil processed.
The overall quality is good, but the price seems high.
If it was a little cheaper, I wouldn't have complained.
View detail
Fits: SUZUKI HAYABUSA, SUZUKI GRADIUS 400, SUZUKI GSR400, SUZUKI GRADIUS 650, SUZUKI GSX-R 750, SUZUKI GSX-R 600, SUZUKI GSX-R 1000, SUZUKI GSR600, SUZUKI BANDIT 1250
Cheap and easy to Custom, surprisingly noticeable!
It only needs to be replaced with the OEMBolt, so anyone with a Hexagon Bolt can easily do the job.
The reason I chose the Dura Bolt from JPMoto Mart is the shade of Gold.
I looked for many things in Gold, but the price was cheap and the actual Gold color was the best.
It's not a product that particularly improves performance, but it's a place you'll see a lot when you're driving by yourself, and it's surprisingly noticeable, so I recommend it!
View detail
Good color and good parenthesis.
I have used the same product on other cars and have no complaints about durability without fading.
It's a bit expensive but it looks better so I'm Large happy.
View detail
It's not easy to find, so it's very helpful to buy it on Webike.
I bought this for fixing License Plate.
It's good to use it in areas where you don't want to be messed with.
Material:There are not many places that sell Torx screws in Stainless Steel that are the right size for motorcycles.
It helps that you can easily buy it on Webike.
View detail
Very high quality Aluminum Bolt
Anodized is very beautiful. I think the price is reasonable and Cost performance is high.
I would love to try the other colors.
View detail
Inexpensive and easy to change Image
It's not a problem for straight lines, but I feel it's a little hard to stick on curved surfaces.
However, in terms of Total, I think it's a good product because it's inexpensive and you can easily change the Image.
View detail
Super lightweight and high quality!
It is very lightweight and has good color. It has a high quality feel and the price is very reasonable for this quality.
It is used in Large amount as Bolt for Cowl.
View detail
It's a Bolt, but it's still a Bolt, and it's a large one.
The texture is very high, and the Image of the Motorcycle changes to Large though it is a small Parts.
It has the same presence as the Titaniumium Bolt. The price is very reasonable and the cost performance is very high.
View detail
Fits: YAMAHA YZ450 F, YAMAHA YZ426 F, YAMAHA YZ400 F, YAMAHA YZ250 F, YAMAHA YZ250, YAMAHA YZ125, YAMAHA WR450 F, YAMAHA WR426 F, YAMAHA WR400 F, YAMAHA WR250 F
Some processing is required.
The use is not Race, but it was not attached with Bolt On. it interferes with the Front Fork Guard restraint and can only be attached with Cut. View detail
3.7
Background:I bought the Bolt because I needed it for my UniversalParts installation.
Quality/texture:at first it was fine, but after using it for a while it started to rust from the paint peeling off.
Performance/Function:If the Screw Mountain Pitch fits, you can use it with no problem.
Cost performance:the cost performance is not good considering the strength of the paint.
Overall rating:subtle.
View detail
Fits: KAWASAKI ZZR1400 GTR, KAWASAKI ZZR1400, KAWASAKI ZX-9 R, KAWASAKI ZX-6 R, KAWASAKI ZX-10 R, KAWASAKI ZRX1200 S, KAWASAKI ZRX1200 R, KAWASAKI ZRX1200 DAEG, KAWASAKI Z800, KAWASAKI Z750 ABS, KAWASAKI Z750, KAWASAKI Z1000 ABS, KAWASAKI Z1000, KAWASAKI VERSYS 650, KAWASAKI VERSYS 1000, KAWASAKI Ninja 650 R, KAWASAKI Ninja 400 R ABS, KAWASAKI Ninja 400 R, KAWASAKI Ninja 400 ABS, KAWASAKI Ninja 400
It's a beautiful Bolt.
Because the crystal is a beautiful bolt of one point, the tank cap area became gorgeous. There is no functionality, but I am satisfied with the appearance of Custom. View detail
Fits: HONDA PCX125, HONDA PCX150
No effect.
I bought it 3 years ago (the product number at that time was MV112B, priced at 2,700 yen) and installed it.
It looked dark when it was installed, but it became even darker with age.
The Right one came off immediately, but the Left one was difficult to remove.
Only the surface sheet was removed and a clean surface came out.
Did you put it up wrong? So I looked it up. "Finally, peel off the surface Seat. There was no explanation for this.
I liked the look of it when I first put it up.
Be careful when you install it, because the visibility will be bad after 3 years.
When I peeled off the glass, there were still some glues on the Mirror, but they could be easily removed by glass cleaner.
View detail
Fits: KAWASAKI NINJA 1000, KAWASAKI Ninja 400, KAWASAKI Ninja 400 ABS, KAWASAKI VERSYS 650, KAWASAKI ZX-6 R, KAWASAKI ZX-10 R, KAWASAKI ER4n ABS, KAWASAKI ER6f, KAWASAKI ER6n, KAWASAKI Ninja 400 R, KAWASAKI Ninja 400 R ABS, KAWASAKI Ninja 650 R, KAWASAKI VERSYS 1000, KAWASAKI Z1000 07-09, KAWASAKI Z1000 ABS 07-09, KAWASAKI ZZR1400 GTR, KAWASAKI ZZR1400, KAWASAKI ZX-9 R, KAWASAKI ZRX1200 S, KAWASAKI ZRX1200 R
It's looking good.
The Ninja1000 is all about black, so I wanted to add red to the color scheme.
The price, it's a bit high.
But that's okay.
It's self-serving, but it's cool.
Installation is easy
After this, I plan to put up the Tank capPad.
View detail
It's looking good.
The Ninja1000 is all about black, so I wanted to add red to the color scheme.
It is installed with M6×16? as a bolt to stop the Front Fender.
I've been referring to other people's imprints as well.
Because it's aluminum, you can't over-tighten it, but there was also a Torque designation, so it's safe.
BoltQuantity:The price is high for 2pc, but for a dress-up, it's a good and affordable option.
View detail
It changes dramatically.
The color of the screen bolts changes the look and feel of the product. I would like to change the color of the bolts when I get bored. View detail