Reviews
Fits: DUCATI M600, DUCATI M400, DUCATI 750 SS, DUCATI 400 SS
Torque wrench required for installation
I bought it for Restore of 1998 formula Ducati MONSTER 400.
Engine's Generator cover, Bolt's head such as Crankcase is rusty, and the purpose is to exchange Bolt for better appearance.
Since Motorcycle is red color, I chose Red color Bolt.
【What made you decide the purchase?】
I also thought about arranging the required number of Bolts that match Size including OEM ProductBolt, but anyway the number and type of Bolt are many and the investigation is Large strange.
Purchasing this set was a deciding factor for purchasing that all necessary Bolt was complete.
Set so price is high (5 Quantity : 1 Set of 8pcs. ), But if you think about it per pc it's not too expensive.
【How was it actually used?】
In terms of strength, there are surfaces that you do not know until you use it for a long time. I am planning to conduct periodic retightening.
【Was it difficult to install? (Hard parts case)】
According to the attached Instruction Manual, the tightening Torque for M6 is specified as 5 Nm, and according to it, Torque wrench was used and installed. Galling preventive disulfide Molybdenum grease is attached, apply Grease to threads, then insert and tighten.
Basically it's an easy task, but Torque wrench is essential.
If the tightening Torque is insufficient, there is also the possibility of loosening during running, if you tighten with Overtorque, Bolt will stretch and you will not be able to secure axial force and will loosen or you will not be able to remove it.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Anyway, remove Bolt 1 pc, clean the area near the hole, and repeat the installation. Do not pull Bolt at a time. Also, as I mentioned above, Torque wrench is mandatory.
Since it may be possible that the amount of attached Grease will run out, I think that it is better to prepare Anti-seeds Grease yourself.
Using the supplied Wrench, you can not manage the tightening Torque. It is hang to use neat tool.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
[Is there anything I was disappointed about?]
OEMBolt (Chromoly, intensity class 8. 8) Manufacturer designation Torque is 9 Nm and 10 Nm. (Depends on location)
On the other hand, the specified Torque of this product is 5 Nm, so it will be tightened with a weak Torque. While saying high strength, it is better to understand that the strength is weaker than OEM's ChromolyBolt.
【Hope for Manufacturer - Please let me know if you have any improvement points]
It was saved because the necessary Size Bolt was complete.
In the attached Hexagonal Wrench, the original Bolt is not loose (Lick it)
And, in the attached Hexagonal Wrench, Torque can not be managed at installation.
Do not you have to dare to attach?
【Have you compared items?】
OEMBolt, Home center's Bolt, Stainless bolt, etc..
Bolt 1 pc 1 pc We examine Size and arrange the necessary number is Large strange, so it really helps if you are in Set.
[Others]
Attached photos, so please refer to it.
View detail
Fits: KAWASAKI ZX-9 R, KAWASAKI BARIUS II, KAWASAKI BARIUS, KAWASAKI GPZ750 R, KAWASAKI GPZ900 R, KAWASAKI KLE250, KAWASAKI KLE400, KAWASAKI ZEPHER 400, KAWASAKI ZEPHER 750 RS, KAWASAKI ZEPHER 750, KAWASAKI ZRX1100, KAWASAKI ZRX400, KAWASAKI ZXR, KAWASAKI ZZR1100, KAWASAKI ZZR400, KAWASAKI ZZR600
How nice
Rust came in OEMBolt, so purchase. It was just Bolt! I thought about it, but the texture after wearing was more beautiful than expected. It is still unknown so far as durability, so it is better than OEM Product View detail
Fits: KAWASAKI ZX-9 R, KAWASAKI BARIUS II, KAWASAKI BARIUS, KAWASAKI GPZ750 R, KAWASAKI GPZ900 R, KAWASAKI KLE250, KAWASAKI KLE400, KAWASAKI ZEPHER 400, KAWASAKI ZEPHER 750 RS, KAWASAKI ZEPHER 750, KAWASAKI ZRX1100, KAWASAKI ZRX400, KAWASAKI ZXR, KAWASAKI ZZR1100, KAWASAKI ZZR400, KAWASAKI ZZR600
I feel good texture, but I care about Cost performance
Compared to OEM, Aluminum Bolt makes it lightweight, rust resistant and good in texture. Workable without problems even for installation. I think that it is also a good thing that the product's color is plentiful View detail
Replace Engine cover bolt
? 【What made you decide the purchase?】 Bolt I always use quality well. This time we replaced all Bolt of Engine Cover of WR 250 R
.
? 【How was it actually used?】 Precision reed, Anodized is also beautiful
? 【Was it difficult to install? (Hard parts case)】 Apply heat-resistant Grease and apply
? 【Please tell me the point of installation and hang (in the case of Hard parts)】 Unlike OEM, material is different, so overtightness = break. Especially long Bolt is attention because Screw is easy to cut.
? [Is there anything I was disappointed about?] The color of Anodized is different when the date of purchase is different. Manufacturer Although I already have it, should you order more than one if you exchange more than one
? [Request to Manufacturer - Please tell us if there are any improvement points】 When used on painted surfaces such as Engine Cover, the back of the Bolt head, the contact surface is not chamfered and the other's paint can be peeled off. C0. I would like a chamfer of about 5.
? 【Have you compared items?】 Quality is inferior but price made by DRC
? [Others] The third piece of photograph is different Anodized color difference of six months purchase difference. Although purchase is Blue, there is a difference between dark Blue and slightly dark Blue.
Although it was installed in WR 250 R this time, I ordered the necessary number because I had set sale, but there was impression such as Bolt shortage.
Is it a reference?
M6 30 mm 19 books
M6 35mmQuantity : 2pc
M6 80 mm 4 books
M6 25 mm 4 books All except the Oil Filter can be exchanged. However, as there are two places with Copper Washer, OEM Product No. 90430-06014 is also required together.
Blue and Red Bolt will shine on Silver's Engine
View detail
Notice long Bolt
With your favorite Bolt, this time I tried to exchange Cover bolt of RMX.
There is set sale, but ChocolateChocolate and other Bolt are also exchanged so we only ordered the necessary parts at Rose.
When installing heat-resistant Grease, it is GOOD because Torque will also be applied uniformly. In addition, as OEMBolt sometimes rusted the axis well, so also to prevent it. (I am using Pad grease)
When Length became about 50 mm, there was a feeling that Bolt would stretch pretty much by tightening, so be careful with over tightening. It seems that Screw seems to be getting better from the threaded position than All Screw. For now, this Manufacturer's Screw has never cut off, but the DRC made a few times more than the Screw's Screw drilling clothes a few times.
Completely self-satisfied, but lonesome Engine will shine a lot
View detail
I have Repeat many times ♪
This product has abundant Size, I purchase various Size many times Repeat.
Screw's accuracy is good, ♪ I think that it is a good product without fading of Anodized at all
View detail
Fits: SUZUKI , HYOSUNG RX, HYOSUNG GT-R, HYOSUNG GV, HYOSUNG GT, HYOSUNG RT, HYOSUNG RX, HYOSUNG GT-R, HYOSUNG GV, HYOSUNG GT, HYOSUNG RT
Oil cap
【WebikeMonitor】
I changed my color because it faded away.
Red should be better
It is okay not to have to buy separately because O-ring comes from the beginning and Custom can be easily done just by replacing
View detail
YFZ 450 Cowl fixed
As usual quality is good.
I used it for Cowl fixed Bolt of YFZ 450. I do not surprise M5's ColorBolt so it's handy.
Attention is necessary because the hexagon hole is also Small so if you tighten it so tightly with characteristics it will lick immediately.
Also wearing Hexagonal Wrench is easy to lick, so be careful
View detail
To Accent
Bolt of Carrier of WR 250 is Stainless Steel, but it was a kind of floating candy so I tried to replace it with this Bolt.
Although I am self-satisfied, I understand if one knows, I am satisfied that the unity feeling comes out from Silver's Bolt.
Material is Aluminum, so cheap Hexagonal Wrench is cautious as it is easy to scratch Anodized. Also, it is better to tighten the last tightening with Hexagonal Wrench which is not Ball because it will scratch if you use Hexagonal Ball for the final tightening.
View detail
Gorgeous
To lonely Swingarm's Dress-up.
I replaced the Bolt of the RearBrake hose guide of DJEBEL 250 XC.
I used this product instead of the rusted OEMBolt because I exchanged the guide which resin became rustling old newly..
Just changing from rusty Bolt to new Bolt improves looks pretty, but with ColorBolt it is more textured UP than that.
It is not cheap Bolt, but I am satisfied without worry of rust.
It's not just Steel, so if you use cheap Hexagonal Wrench it is likely to be peeled off or scratched, so we recommend you to install with a solid tool.
View detail
Cut and use
I used it for DJEBEL 250 XCOil Filter Cover. Since Length is 75 mm, it is a waste, but I cut it about 5 mm and used it. You can cut it easily with Grinder, but you want a Variation with a length of 5 mm in units of 5 mm.
Although it is also on sale from Takegawa, I made it to this product which can be obtained in a few days by Cancellation which takes considerable delivery time.
It is as usual, including complaints of texture, but I ordered 25 mm this time, but plenty of strength pledged. I do not care because it is not installed side by side, but I want you to make the color more uniform from the price.
View detail
It is not easy to ...
I was looking for a black bolt, wanting to unify it with black, holding a black cowl with silver bolts. A certain degree can be arranged at the motorcycle store, but if you stick with it, no size will come out. We ordered that size not at this time Mr. Weibik. JP Although I have used the motomart bolt before, I think that the quality is good. Since the color was black this time, there is no special mention without any problem. I think that COSPA is also good. Just order separately and take shipping costs is COSPA DOWN .... Even though what you say is well-stocked, it is because of the net order that you want the bolt of the color you want, of the type you want, of the size you want, is not it. I appreciate Mr. Webik in that sense. View detail
Best done
As usual the quality is high.
Blue is not conspicuous in Black land, but I am satisfied with my self.
I would like to exchange another Bolt if it is a bit cheaper, but I am exchanging it with hanghang.
There is no problem in strength, texture is good, Anodized is durable, and the performance is complaint.
View detail
Fits: SUZUKI RMX250 S, SUZUKI RM250 82-08, SUZUKI RM80 90-08, SUZUKI RM85 90-08, YAMAHA SEROW250(05-10) XG250 TRICKER(04-10) XT250X(06-08), SUZUKI RM125 82-08, SUZUKI RM-Z450 05-12, SUZUKI RM-Z250 07-12
It was beautiful Red.
I like the color and I like it. O-ring comes with two LargeSmalls but I only made it one side. Probably Large It will be durable. It is a drawback that the Oil gauge disappears, but I think that it is necessary to drill a hole for something - View detail
Fits: KAWASAKI ZX-9 R, KAWASAKI BARIUS II, KAWASAKI BARIUS, KAWASAKI GPZ750 R, KAWASAKI GPZ900 R, KAWASAKI KLE250, KAWASAKI KLE400, KAWASAKI ZEPHER 400, KAWASAKI ZEPHER 750 RS, KAWASAKI ZEPHER 750, KAWASAKI ZRX1100, KAWASAKI ZRX400, KAWASAKI ZXR, KAWASAKI ZZR1100, KAWASAKI ZZR400, KAWASAKI ZZR600
PetitCustom
Bolt exchange of Fuel Tank. The color is Gold. There are various gold by Manufacturer, but the product here was a proper Gold that does not have Yellow color. It was good to match with other Bolt Gold. I was able to do it easily with 6 hex Wrench. It is Recommendation for PetitCustom.
View detail
It is an effect, but Quality ◎
Used for installation of ZETAClamp in RMX.
Clutch side is M5 and Length is just 20 mm.
As always, the quality is good, reliable, and the tip of Screw is firmly Anodized.
It is expensive Bolt, but I use it for parts where necessary strength is necessary, so I mainly use this Manufacturer in quality first.
View detail
Fits: KAWASAKI ZZR1400 ABS, KAWASAKI ZZR1400, KAWASAKI ZX-6 R, KAWASAKI ZX-10 R, KAWASAKI Z750 07-08, KAWASAKI Z1000, KAWASAKI VERSYS, KAWASAKI Ninja 400, KAWASAKI ER6 n, KAWASAKI ER6 f, KAWASAKI 1400 GTR
It is good not to be Carbon Style
Gasoline refueling mouth was refueled Nozzle was worried about getting hurt so I was looking for a cover cover to hide the scratches I found this item. Satisfaction is high as it is not FakeCarbon. If you install carefully you can stick it cleanly. View detail
To Accent of One point
This time it became MAJESTYSOEMOption
Body Mount Shield Replace with attached Shield attachment Bolt.
Choose Dura Bolt's Red.
Because the color of the car is Black, Red on One point.
Anodized is beautiful.
"Red is fading color" As for Dura Bolt's Red
I have not been worried.
I've also used this Bolt Red for the Motorcycle that I've been connecting to
There was no problem.
If you miss one, Bolt's head Screw hole.
I turn it with Hexagonal Wrench, but because Bolt is soft
Screw hole is easy to collapse.
Every time I purchase Motorcycle, I also purchase this Bolt,
Several strips will lick Screw holes when repeating desorption.
Still buying it again.
That's Bolt..
Please slowly, please turn it gently.
View detail
Quality is satisfactory
DJEBEL 250 mounted on XCBrake side.
As usual the quality is the best.
Since it is not Steel, it is oblique, and forcible is not forbidden. I will lick Screw Mountain.
It is expensive Bolt, but the quality is the best so it is Recommendation for those who purchase ColorBolt.
Anodized is also durable, and neither hexagonal hole nor anodized peeling easily occurs easily.
For DJEBELXC, M6 25 mm is Fit.
View detail
Quality best
DJEBEL 250 mounted on XCClutch side.
DJEBEL including RMX etc. Mirror Holder becomes M5. Length purchased 20 mm and 25 mm, but it is just 20 mm.
Since it is not Steel, if you screw it diagonally or forcibly, it will easily break Screw Mountain, so impossible is impossible.
Although it is a combination with the Zeta, although the color tone is somewhat different, Quality is still as high as ever.
View detail