Reviews
Fits: その他
The OEM hex size was 4mm and this one was 3mm. Besides the fact that you need two types of hex wrench, it could be said that it is an easy customization.I am a little worried about color fading, because it is finished with anodized aluminum. But I wil
The OEM hex size was 4mm and this one was 3mm. Besides the fact that you need two types of hex wrench, it could be said that it is an easy customization.
I am a little worried about color fading, because it is finished with anodized aluminum. But I will change it again if it gets to bother me. I would like to recommend it to others if it becomes a little cheaper.
View detail
Fits: HONDA CB1300SB
I just pasted it because this is exclusive product for a specific model. It was difficult to push out air bubbles completely because the size is just the same size as the mirror.I cut the whole a bit and put it on.This enabled air bubbles to c
I just pasted it because this is exclusive product for a specific model. It was difficult to push out air bubbles completely because the size is just the same size as the mirror.
I cut the whole a bit and put it on.
This enabled air bubbles to come out easily but some still remained.
The color is deeper than I expected and it looks a bit darker.
I rode in rain; the mirror neither had a clear view nor an unclear view.
I don't see in case of night because I don't run at night.
View detail
I am using it for the OEM engine guard bolt of KAWASAKI. I've heard that it won't work on a place where it gets heated. But I haven't experienced any problem after driving 2000km or so.Still, I don't think you can use it on a place where you need
I am using it for the OEM engine guard bolt of KAWASAKI. I've heard that it won't work on a place where it gets heated. But I haven't experienced any problem after driving 2000km or so.
Still, I don't think you can use it on a place where you need to apply torque pressure, because it is made of aluminum and quite soft. Also, you need to set the hex wrench to the right position, or else you would break it.
View detail
Took about 2 weeks to receive my order. Although the size of the allen key that is used to remove the original screws is different, it is very easy to install. Took me less than 10 minutes to do so.
Took about 2 weeks to receive my order. Although the size of the allen key that is used to remove the original screws is different, it is very easy to install. Took me less than 10 minutes to do so. View detail
Fits: KAWASAKI ZZR250, KAWASAKI ZZR400, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR400, KAWASAKI BALIUS II, KAWASAKI BALIUS, KAWASAKI GPZ750 R, KAWASAKI GPZ900 R, KAWASAKI ZR-7, KAWASAKI ZZR1100, KAWASAKI ZEPHYR750
I chose this color to make it match with BEET rearsets. It doesn't stand out, but looks nice.In terms of installation, there was no problem and was easy.If anything, it was hard to take off the fixing clip and to remove the old grease.It was g
I chose this color to make it match with BEET rearsets. It doesn't stand out, but looks nice.
In terms of installation, there was no problem and was easy.
If anything, it was hard to take off the fixing clip and to remove the old grease.
It was good because I was given a chance to clean it up.
It would be even better if it was a little bit cheaper.
View detail
Fits: HONDA CBR900RR, HONDA CBR600F4, HONDA CBR1100XX, HONDA CB1300SF, HONDA CB400SB, HONDA CB400SF, HONDA CB1300SB, HONDA CB1300ST, HONDA VTR1000 SP-1, HONDA VTR1000 SP-2, HONDA CBR600RR, HONDA CBR1000RR, HONDA CBR929RR, HONDA CBR954RR
not all screw able to fit to honda cb400 vtec 1 fuel tank cap. only 3 thin and long screws can be used. can the owner kindly pm me pls.
not all screw able to fit to honda cb400 vtec 1 fuel tank cap. only 3 thin and long screws can be used. can the owner kindly pm me pls. View detail
Fits: HONDA CBR900RR, HONDA CBR600F4, HONDA CBR1100XX, HONDA CB1300SF, HONDA CB400SB, HONDA CB400SF, HONDA CB1300SB, HONDA CB1300ST, HONDA VTR1000 SP-1, HONDA VTR1000 SP-2, HONDA CBR600RR, HONDA CBR1000RR, HONDA CBR929RR, HONDA CBR954RR
The Coloring was a color as expected! Although it is , it is regrettable that it is slightly more expensive. Bolt could not be exchanged but it became the panel of removing a Carbon sheet once [ ] from from [ stuck the Carbon sheet of the
The Coloring was a color as expected! Although it is
, it is regrettable that it is slightly more expensive.
Bolt could not be exchanged but it became the panel of removing a Carbon sheet once [
] from from [ stuck the Carbon sheet of the Tank again, and also ].They are goods very good for a Makeover of the
Tank!
View detail
The color of a Decal and a pattern are considerably pleasing! Although it was , when stretching a Decal, the work which does Cut of a Decal according to a Tank was serious.In a direction to change the Image of the circumference of the Tank int
The color of a Decal and a pattern are considerably pleasing! Although it was
, when stretching a Decal, the work which does
Cut of a Decal according to a Tank was serious.In a direction to change the Image of the circumference of the
Tank into, it is recommended!
View detail
Fits: KAWASAKI ZX-9 R, KAWASAKI BARIUS II, KAWASAKI BARIUS, KAWASAKI GPZ750 R, KAWASAKI GPZ900 R, KAWASAKI KLE250, KAWASAKI KLE400, KAWASAKI ZEPHER 400, KAWASAKI ZEPHER 750 RS, KAWASAKI ZEPHER 750, KAWASAKI ZRX1100, KAWASAKI ZRX400, KAWASAKI ZXR, KAWASAKI ZZR1100, KAWASAKI ZZR400, KAWASAKI ZZR600
Since it is a place which attached, is easy, has ridden and is always visible, there is changed admiration.It was felt beautiful more than it considered.Although what is necessary is just cheap to a slight degree, it is so so satisfaction.
Since it is a place which attached, is easy, has ridden and is always visible, there is changed admiration.It was felt beautiful more than it considered.Although what is necessary is just cheap to a slight degree, it is so so satisfaction. View detail
Fits: KAWASAKI ZZR1400 ABS, KAWASAKI ZZR1400, KAWASAKI ZX9 R, KAWASAKI ZX-6 R, KAWASAKI ZX-10 R, KAWASAKI Z1000, KAWASAKI VERSYS, KAWASAKI ER6 n, KAWASAKI ER6 f, KAWASAKI 1400 GTR, KAWASAKI Z750 07-08, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200, KAWASAKI ZZR1200
the Tank-cap sticker was stuck -- it ranked next and was alike and exchanged according to the color of a Tp of a Front fork. Wasn't having changed slightly quite satisfactory, although it was easy?
the Tank-cap sticker was stuck -- it ranked next and was alike and exchanged according to the color of a Tp of a Front fork.
Wasn't having changed slightly quite satisfactory, although it was easy?
View detail
Fits: KAWASAKI ZZR1400 ABS, KAWASAKI ZZR1400, KAWASAKI ZX-6 R, KAWASAKI ZX-10 R, KAWASAKI Z750 07-08, KAWASAKI Z1000, KAWASAKI VERSYS, KAWASAKI Ninja 400, KAWASAKI ER6 n, KAWASAKI ER6 f, KAWASAKI 1400 GTR
The good high grade feeling came out with thickness although it was cheap, when it attached, and the prices were very good goods.Since there is the Dress-up effect up, it is a Recommendation.When sticking, it shifted, and it twisted and was [ like ] very
The good high grade feeling came out with thickness although it was cheap, when it attached, and the prices were very good goods.Since there is the Dress-up effect up, it is a Recommendation.When sticking, it shifted, and it twisted and was [ like ] very anxious. View detail
Fits: HONDA CBR250 R, SUZUKI HAYABUSA, SUZUKI GSXR 750, HONDA VTR250, HONDA CBR600 RR, HONDA CBR1000 RR, HONDA CBR500R, HONDA CB1000 SF, HONDA CB1300 SB, HONDA CB1300 SF, HONDA CB1300 ST, HONDA CB400, HONDA CBR1100 XX, HONDA CBR250 R -89, HONDA CBR250 RR, HONDA CBR400 R, HONDA CBR400 RR, HONDA CBR600 F-F4, HONDA CBR600 F, HONDA CBR600 F4
Since the portion of the Rubber of a Normal step was caught in the Shoes, exchange of was done.It is touch also with texture easy attachment dramatically and sufficient.The split pin is also recyclable.
Since the portion of the Rubber of a Normal step was caught in the Shoes,
exchange of was done.It is touch also with texture easy
attachment dramatically and sufficient.The
split pin is also recyclable.
View detail
Fits: SUZUKI BANDIT 1200, SUZUKI GSX-R 750, SUZUKI GS1200 SS, SUZUKI GSX-R 1000, SUZUKI GSX1400, SUZUKI HAYABUSA, SUZUKI INAZUMA, SUZUKI SV400, SUZUKI SV650, SUZUKI TL1000, SUZUKI GS1200 SS, SUZUKI GSX-R 1000, SUZUKI GSX1400, SUZUKI HAYABUSA, SUZUKI INAZUMA, SUZUKI SV400, SUZUKI SV650, SUZUKI TL1000
Since it was somehow lonely touch although there was neither corrosion nor discoloration in the Bolt of a NORMAL.Since the Tank has also attached the Blue & Carbon cover although the Blue was chosen by the accessories besides ♪ which attached the
Since it was somehow lonely touch although there was neither corrosion nor discoloration in the Bolt of a NORMAL.Since the Tank has also attached the Blue & Carbon cover although the Blue was chosen by the accessories besides ♪
which attached the Bolt of variety entertainments to the One point of the circumference of a Tank, and unification, a Blue is not conspicuous just for a moment. -- (sweat) It is whether other colors will be better if it is made the
One point?
View detail
Since the fitting volt of a Bikini cowl has been somber, it is used for a Dress-up up.The Gold is conspicuous and pleasing at the One point.
Since the fitting volt of a Bikini cowl has been somber, it is used for a Dress-up up.The Gold is conspicuous and pleasing at the
One point.
View detail
Fits: YAMAHA DIVERSION, YAMAHA FJR1300, YAMAHA FZ1 FAZER, YAMAHA FZ1, YAMAHA FZ400, YAMAHA FZ6 FAZER, YAMAHA FZ6, YAMAHA FZ8 FAZER, YAMAHA FZ8, YAMAHA FZR1000, YAMAHA FZR600, YAMAHA SR400, YAMAHA SR500, YAMAHA SRX400, YAMAHA SRX600, YAMAHA TDM850, YAMAHA TDM900, YAMAHA TZR250 R, YAMAHA XJR1200, YAMAHA XJR1300
Since the Handlebar end was also changed to the Blue of the same color although it was not in the photograph, it became it and conjointly very much lowbrow touch. It is very pleasing individually and the reputation from the neighboring small children
Since the Handlebar end was also changed to the Blue of the same color although it was not in the photograph, it became it and conjointly very much lowbrow touch.
It is very pleasing individually and the reputation from the neighboring small children is also very best.All things when the original manufacturer's product is attached are used for parts (a Spring, a Ball, a Washer, a pin, etc.) other than the
peg body as they are.
clearing work -- right and left -- I think that it becomes a simple and convenient One point dress-up since it can do in about about 10 minutes in all.
View detail
Fits: KAWASAKI ZZR1400 ABS, KAWASAKI ZZR1400, KAWASAKI ZX9 R, KAWASAKI ZX-6 R, KAWASAKI ZX-10 R, KAWASAKI Z1000, KAWASAKI VERSYS, KAWASAKI ER6 n, KAWASAKI ER6 f, KAWASAKI 1400 GTR, KAWASAKI Z750 07-08, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200, KAWASAKI ZZR1200
Since it missed something when it continued being a NORMAL too, although the Carbon sheet was stretched to the Tank cap, it purchased.Attachment needed to keep in mind that the Bolt was an Aluminum although it exchanged one at a time so that it might not
Since it missed something when it continued being a NORMAL too, although the Carbon sheet was stretched to the Tank cap, it purchased.Attachment needed to keep in mind that the Bolt was an Aluminum although it exchanged one at a time so that it might not become an Overtorque.Appearance also becomes good, an Anodized is also beautiful after exchange, and its a Cost performance is also well satisfactory. View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XJR400 R, YAMAHA FJR1300, YAMAHA FZ1 FAZER, YAMAHA FZ1, YAMAHA FZS1000
Since the Tank cap bolt had rusted, it exchanged for the Makeover and the Dress-up up.It is dramatically satisfied with the color as expected of the Aluminum Bolt of the Gold.
Since the Tank cap bolt had rusted, it exchanged for the Makeover and the Dress-up up.It is dramatically satisfied with the color as expected of the Aluminum Bolt of the
Gold.
View detail
The Bolt of M6 which has stopped the Cover of the Muffler was exchanged.The Blue of the Bolt became an Accent, and more than it considered, it became a good Dress-up up.
The Bolt of M6 which has stopped the Cover of the Muffler was exchanged.The Blue of the
Bolt became an Accent, and more than it considered, it became a good Dress-up up.
View detail
Fits: KAWASAKI NINJA2 Helmet50RR Z250 (13)
Although the product of the other company was stuck, since the outside was a Type stuck between Nuts, its adhesive strength is weak, and it has flown unawares.since it is -- -- although it is expensive just for a moment -- it is change here! the
Although the product of the other company was stuck, since the outside was a Type stuck between Nuts, its adhesive strength is weak, and it has flown unawares.since it is
--
-- although it is expensive just for a moment -- it is change here! the
Design is practically equal -- it is -- although -- it is thick and is with a high grade feeling.What was necessary was just to have carried out here from the start.Since it was not the
fragment, when sticking, strain was carried out a little, but completion is satisfactory.If custom-made one of
Design top priority is good, ?
self-satisfaction can do, and he is Massais.
View detail
Fits: KAWASAKI ZX-9 R, KAWASAKI BARIUS II, KAWASAKI BARIUS, KAWASAKI GPZ750 R, KAWASAKI GPZ900 R, KAWASAKI KLE250, KAWASAKI KLE400, KAWASAKI ZEPHER 400, KAWASAKI ZEPHER 750 RS, KAWASAKI ZEPHER 750, KAWASAKI ZRX1100, KAWASAKI ZRX400, KAWASAKI ZXR, KAWASAKI ZZR1100, KAWASAKI ZZR400, KAWASAKI ZZR600
It purchased as if appearance changes. Although it was nonchalant, it was very good for it for change to appear in appearance.Since it was easy to purchase also in price, I also regard changing and enjoying a color as good kana.
It purchased as if appearance changes.
Although it was nonchalant, it was very good for it for change to appear in appearance.Since it was easy to purchase also in price, I also regard changing and enjoying a color as good kana.
View detail