Reviews
Strength, Finished Alone. Just high
250 yen or more with Bolt 1 pc - - - It is a high-priced item, but if you use cheap ColorBolt, I will recommend this.
Especially the strength does not compare with Chinese made or unnamed Manufacturer. It's not as good as SteelBolt, so you need to be careful with tightening and it is written down to Torque in the manual. If you do not tighten it to Brown it is Large I am using it without worrying it is durable.
There is a difference in density of Anodized depending on LOT. Although it is understandable when it is arranged, it may be better to purchase it collectively for those who are particular about it.
I installed it in WR's ZETASprocket guard. The color is slightly thinner than ZETABlue.
For reference, BoltLength is 40 mm.
View detail
High quality
It is a solid making. I tried it with Purple alumite of DJEBEL, but it seems that the color is slightly thin.
Although it may be likable and disliked because it protrudes quite a lot, Bolt's thickness may be useless if securing strength with Aluminum.
It is better to be less conspicuous in taste and little more in the taste.
It is quality that exceeds the line with cheap Aluminum Bolt.
View detail
Not possible
Quantity for YZ 250 F and Husq 's SM 450 R : 2pc purchase.
Since Air Screw adjusts frequently according to the temperature, it is troublesome to turn Screw with a special driver each time, so I bought it.
YZ can be adjusted to Smooth because there is no Engine Starter Motor, but Husk has Engine Starter Motor under the carburetor so how do you think it is slightly subtle. I have not installed it yet.
A bad point :
The price is expensive. I think that it does not need such a thing personally though a figure or fine workmans is attached. I think that it would be enough if the mark or the line which Screw can turn by hand and become a standard to some extent is scraped. From other Manufacturer I would like you to issue a MODEL that has reduced more in cost.
Well, since it is a thing of hobby, it is Large thing in terms of added value (Lol)
View detail
Purchase for Cowl
I bought this item to make all Cowl's Bolt Gold. There is no problem with accuracy as the color of Image.
I think that it is very good to install on Cowl.
it's recommended.
View detail
Aluminum BilletBolt
【WebikeMonitor】
I installed crops made abroad, but the strength was weak and I licked Bolt head
I replaced it with a product of Manufacturer that I can relax.
I replaced the Front fender 's Mounting Bolt.
With this you can ride with confidence.
View detail
Aluminum BilletBolt
【WebikeMonitor】
I bought overseas cheeps, but since Bolt's head has collapsed I exchanged it with a product that I can relax.
Tank installation part, Seat Cowl, Side cowl
View detail
Ideal for Dress-up. Especially Red is astringent and has no excessive assertion
I attached it to MT-09.
Bolt holding a Screen of the Other Company Product and Intake (Dummy) I bought it for the replacement of Bolt holding the Gold net.
?Good point?
- Bolt has good coloring
- Since it is 16 mm and 25 mm Lineup, it can correspond in a wide range
?I like it?
- Price as high as mere Bolt
- The possibility that Anodized will peel off if it is tightened strongly
It is GoldFork of MT-09 which is not well-known in the world, but I dare dress up parts such as Dress-up parts in Gold to harmonize with that Fork.
Screen is Gold's Bolt, Intake is already on the Gold web of Other Company Product (Gold) Since I was wearing it, I chose Red's Bolt as a color difference.
Gold's Bolt shines as beautifully as Fork's brilliance and Red's Bolt is extremely satisfied with astringent colors that do not make excessive claims.
Since it is Anodized, especially Red color Bolt seems to fade immediately with direct sunlight if it keeps it rain.
It is unknown what kind of durability it is because I have not handled Bolt for Dress-up of this hand so far, but even if it gets deteriorated, something can be purchased from about several hundred yen at most, I think that you should buy it next to the order.
It is also written in Package but Overtorque is strict prohibition. It also becomes a cause of licking and I think that Anodized will peel off probably if it is tightened to the full force as the coating of Anodized is weak.
If only one point is asserted, you can make your car even better with a budget of about 1000 yen to about 2000 yen.
It's easy, so I'd like to Dress-up my favorite car from now, or I think that it is the best product for those who said they would like to Dress-up even if they are already doing Dress-up.
View detail
Since it is absolutely necessary for Bolt 25 mm under the neck
Since we already changed the short Handlebar for Z250 at the time of delivery, we will have to add a little Arrangement when installing the Screen of MRA at a later time, so if you absolutely need a 25mm Bolt under your neck you can buy an ordinary I purchased 1 pc tens of yen Truss bolt and I got lost.
Since both Handlebar and Bar End were made into Gold of the bright eyes, this Bolt tried Titanium brown a little calmer even in the same line.
Privately, I am satisfied with Large, but since each person has its own sensitivity, please judge by Matching in the image.
This Cost is quite expensive for 4 Screws, but I think that it is A little luxury item that meets the odds of oddity owners like me who know only by those who understand.
View detail
Button bolt
Purchase Red by looking at others' impres.
It is cheap without color unevenness and is good. I can feel free to imechen so I will make it Gold this time.
I will buy it because it seems that it can be used in many other ways.
View detail
Button bolt
Screen's Bolt purchase Black watching the other imprint for replacement.
I think that it is cheap without color unevenness and good.
It seems that it can be used in various places, so I plan to purchase it again.
View detail
I am using it for the OEM engine guard bolt of KAWASAKI. I've heard that it won't work on a place where it gets heated. But I haven't experienced any problem after driving 2000km or so.Still, I don't think you can use it on a place where you need
I am using it for the OEM engine guard bolt of KAWASAKI. I've heard that it won't work on a place where it gets heated. But I haven't experienced any problem after driving 2000km or so.
Still, I don't think you can use it on a place where you need to apply torque pressure, because it is made of aluminum and quite soft. Also, you need to set the hex wrench to the right position, or else you would break it.
View detail
Took about 2 weeks to receive my order. Although the size of the allen key that is used to remove the original screws is different, it is very easy to install. Took me less than 10 minutes to do so.
Took about 2 weeks to receive my order. Although the size of the allen key that is used to remove the original screws is different, it is very easy to install. Took me less than 10 minutes to do so. View detail
Since the fitting volt of a Bikini cowl has been somber, it is used for a Dress-up up.The Gold is conspicuous and pleasing at the One point.
Since the fitting volt of a Bikini cowl has been somber, it is used for a Dress-up up.The Gold is conspicuous and pleasing at the
One point.
View detail
The Bolt of M6 which has stopped the Cover of the Muffler was exchanged.The Blue of the Bolt became an Accent, and more than it considered, it became a good Dress-up up.
The Bolt of M6 which has stopped the Cover of the Muffler was exchanged.The Blue of the
Bolt became an Accent, and more than it considered, it became a good Dress-up up.
View detail
Although the Bolt has already disappeared with the photograph, it can let wiring pass by such touch. -- Although it is perfect if only this product was found however it might search, but there is one long 5 more mm ... -- it and a price -- just
Although the Bolt has already disappeared with the photograph, it can let wiring pass by such touch.
-- Although it is perfect if only this product was found however it might search, but there is one long 5 more mm ...
-- it and a price -- just for a moment ... although it is unavoidable since it is goods which seem to be technical very difficult well ...
View detail
There is little number considering a price, and since it is easy to lick a thread part, depending on the place to be Used, it is quite weak BOLT. It cannot use, unless it uses a little harder construction material.
There is little number considering a price, and since it is easy to lick a thread part, depending on the place to be
Used, it is quite weak BOLT.
It cannot use, unless it uses a little harder construction material.
View detail
M6x70 Red [ one ], M6x55 Blue [ one ], M6x20 Blues [ two ], and M6x20 Reds [ two ] are purchased. It used for YOSHIMURA Point cover. It becomes the Accent and is large satisfaction.
M6x70 Red [ one ], M6x55 Blue [ one ], M6x20 Blues [ two ], and M6x20 Reds [ two ] are purchased.
It used for
YOSHIMURA Point cover.
It becomes the
Accent and is large satisfaction.
View detail
Since one Bolt of why and a NORMAL has been removed and lost, the cause to attach is on the Motorcycle, ..., however as a result of attaching, and although it is a nonchalant Dress-up up because of the place standing out, it can carry out a Touring in the
Since one Bolt of why and a NORMAL has been removed and lost, the cause to attach is on the Motorcycle, ..., however as a result of attaching, and although it is a nonchalant Dress-up up because of the place standing out, it can carry out a Touring in the mood of being good. Since there are 4 colors of colors, it can choose by liking. Or [ becoming tight if black is used ] ... Although it was made red, if it gets bored, he will plan to use a Blue. View detail
Although the unit price was high, it was the becoming high texture. Since it is the Aluminum, although it is very cautions, of course by proper torque, there is no modification in an Overtorque etc.
Although the unit price was high, it was the becoming high texture.
Since it is the
Aluminum, although it is very cautions, of course by proper torque, there is no modification in an Overtorque etc.
View detail
[Webike Monitor] Since the pure sheet of 250TR was fixed, it purchased. It combined and used Plain washer M6 of the Manufacturer [product number:DPW060BK]. Since the Tandem grip was attached, and the tool might interfere in the Tandem grip on t
[Webike Monitor] Since the pure sheet of
250TR was fixed, it purchased.
It combined and used Plain washer M6 of the Manufacturer [product number:DPW060BK].
Since the Tandem grip was attached, and the tool might interfere in the Tandem grip on the occasion of sheet desorption when it was a pure Flange bolt, it resulted in exchange.
Desorption of the sheet became very easy after change to the Cap bolt.
View detail