Reviews
It's disappointing.
It came in a color not in the picture. I wanted a gold color, but it was orange. Metal is weak. One is the wrong length.It came in a color not in the picture. I wanted a gold color, but it was orange. Metal is weak. One is the wrong length.It came in a color not in the picture. I wanted a gold color, but it was orange. Metal is weak. One is the wrong length. View detail
Fits: HONDA CB400 SF, HONDA CB400 SF VERSION R, HONDA CB400 SF V-TEC
cb400sf nc42 Late MODEL
Used on cb400sf nc42 late model.
First of all, one bolt of the crank cover was not long enough for the one I bought, so I had to cut a long bolt and put it on. (I had to cut a long bolt to attach it.)
The other side attaches normally.
In light of this, the work may need some processing, so the work Sukill was given 2 stars!
Next, it looks cool.
Purchasers should be prepared for some processing.
I think it's worth it, in my opinion, because it makes a huge difference in the look of the product.
View detail
Fits: YAMAHA WR250 R, YAMAHA WR250 X
Dress-up as well.
I purchased a new Bolt to replace the Gold that had discolored to Silver due to UV light.
To replace all Bolts this Quantity:Set is not enough.
I would like to see the number of Bolt's increase.
View detail
Fits: KAWASAKI ZX-12R
Weight saving
The bolt had corroded over time, so I decided to replace it. The bolt is very lightweight, but because it is an aluminum bolt, the Torque specified for M6 is 5N, which is half that of an OEMB bolt. The Bolt is very lightweight, but the M6 specified Torque is 5N, which is half that of the OEMBOLT. It is recommended to apply the included Copper Grease. I think Torque wrench is necessary. I replaced it with a diagonal one to avoid distortion. However, the weight reduction is about half of OEM, I think. I haven't measured it, but it works as far as weight reduction is concerned. The number of pieces was perfect and the length was the same as OEM etc. View detail
Fits: YAMAHA MT09A
For a dress-up look.
I bought this for a dress-up.
It has a nice atmosphere.
Hexagonal Wrench1 pc and Molybdenum are included.
When I rose under the Left Side, what looked like oil leaked a little, but when I removed it, it stopped, so I replaced it as is.
I was afraid that it might be nipped if I applied force to it because it is aluminum, but it seems to be made hard and there seems to be no problem as long as the Hexagonal Wrench is inserted deeply.
A little expensive? I thought it was a little expensive, but I'm glad I bought it.
View detail
Fits: SUZUKI GSX-S1000
grow dull in color (colour)
The heat from the Engine faded it in less than a year. I'll never buy it again. View detail
Fits: HONDA JADE, HONDA JADE SLASH S
JADE 250 Engine bolt set
JADE 250 Engine bolt set
Quantity:Pair (for Left and Right) The Bolt on the Engine Cover is all Quantity:It was a Set.
It was more affordable than buying at Rose.
The price is a bit high, but it's a solid Bolt.
In addition, Instruction Manual, Hexagonal Wrench, and Grease are enclosed in the package.
I'll be using you again when I buy another Motorcycle Bolt set!
View detail
Fits: YAMAHA MT09A
Great atmosphere!
I changed the engine bolts of MT09 to Red to match the body color
It's a bit of a dress-up, but it gives it a nice vibe and I like it!
View detail
Fits: YAMAHA MT09A
I can't wait to see how it turns out!
Since the color of MT09 is painted Black/Red, I decided to change the color of bolts to Red as well I bought it because I wanted to
I haven't received it yet, so when it's installed, I'd like to post pictures etc
I'm looking forward to receiving it
View detail
Fits: YAMAHA MT09A
What kind of atmosphere will it create?
I haven't received it yet, so I don't know what the vibe will be, but it will match the color of the MT09 I went with the Red Bolt kit
I would like to do another in-play once it's installed
View detail
Fits: YAMAHA MT09A
Dress-up
It will be installed in MT09
I bought Red to match the body color of the car
It hasn't arrived yet, so I don't know what it will look like, but I'll get back to the impresario once it's installed I would like to
View detail
Fits: HONDA CB400 SF, HONDA CB400 SF VERSION R, HONDA CB400 SF V-TEC
It's too unfriendly
I bought the Red, and it has detailed instructions on where to install the Bolt, etc It wasn't
In addition, while comparing with the existing Bolt, 1 pc at a time, I replaced it, but 1 pc inevitably The size did not fit
View detail
Fits: HONDA CB400SF CB400SB Revo NC42
Good high strength aluminium
Had these purchased for the aesthetic look on my 7 year old revo engine casing. Love the outlook of it. Every bolt fits accordingly to size and installation was a Breeze. It is Super light in weight as compared to the original bolts however I am not certain if the strength will be as tough as the original ones. Shall wait and see in time to come. Overall a good buy. Would definitely recommend to others. View detail
Fits: HONDA CB400SF CB400SB Revo NC42
The best
If you buy Dress-up
It was a good feeling.
View detail
Fits: DUCATI M600, DUCATI M400, DUCATI 750 SS, DUCATI 400 SS
Torque wrench required for installation
I bought it for Restore of 1998 formula Ducati MONSTER 400.
Engine's Generator cover, Bolt's head such as Crankcase is rusty, and the purpose is to exchange Bolt for better appearance.
Since Motorcycle is red color, I chose Red color Bolt.
【What made you decide the purchase?】
I also thought about arranging the required number of Bolts that match Size including OEM ProductBolt, but anyway the number and type of Bolt are many and the investigation is Large strange.
Purchasing this set was a deciding factor for purchasing that all necessary Bolt was complete.
Set so price is high (5 Quantity : 1 Set of 8pcs. ), But if you think about it per pc it's not too expensive.
【How was it actually used?】
In terms of strength, there are surfaces that you do not know until you use it for a long time. I am planning to conduct periodic retightening.
【Was it difficult to install? (Hard parts case)】
According to the attached Instruction Manual, the tightening Torque for M6 is specified as 5 Nm, and according to it, Torque wrench was used and installed. Galling preventive disulfide Molybdenum grease is attached, apply Grease to threads, then insert and tighten.
Basically it's an easy task, but Torque wrench is essential.
If the tightening Torque is insufficient, there is also the possibility of loosening during running, if you tighten with Overtorque, Bolt will stretch and you will not be able to secure axial force and will loosen or you will not be able to remove it.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Anyway, remove Bolt 1 pc, clean the area near the hole, and repeat the installation. Do not pull Bolt at a time. Also, as I mentioned above, Torque wrench is mandatory.
Since it may be possible that the amount of attached Grease will run out, I think that it is better to prepare Anti-seeds Grease yourself.
Using the supplied Wrench, you can not manage the tightening Torque. It is hang to use neat tool.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
[Is there anything I was disappointed about?]
OEMBolt (Chromoly, intensity class 8. 8) Manufacturer designation Torque is 9 Nm and 10 Nm. (Depends on location)
On the other hand, the specified Torque of this product is 5 Nm, so it will be tightened with a weak Torque. While saying high strength, it is better to understand that the strength is weaker than OEM's ChromolyBolt.
【Hope for Manufacturer - Please let me know if you have any improvement points]
It was saved because the necessary Size Bolt was complete.
In the attached Hexagonal Wrench, the original Bolt is not loose (Lick it)
And, in the attached Hexagonal Wrench, Torque can not be managed at installation.
Do not you have to dare to attach?
【Have you compared items?】
OEMBolt, Home center's Bolt, Stainless bolt, etc..
Bolt 1 pc 1 pc We examine Size and arrange the necessary number is Large strange, so it really helps if you are in Set.
[Others]
Attached photos, so please refer to it.
View detail
Fits: SUZUKI , HYOSUNG RX, HYOSUNG GT-R, HYOSUNG GV, HYOSUNG GT, HYOSUNG RT, HYOSUNG RX, HYOSUNG GT-R, HYOSUNG GV, HYOSUNG GT, HYOSUNG RT
Oil cap
【WebikeMonitor】
I changed my color because it faded away.
Red should be better
It is okay not to have to buy separately because O-ring comes from the beginning and Custom can be easily done just by replacing
View detail
Fits: SUZUKI RMX250 S, SUZUKI RM250 82-08, SUZUKI RM80 90-08, SUZUKI RM85 90-08, YAMAHA SEROW250(05-10) XG250 TRICKER(04-10) XT250X(06-08), SUZUKI RM125 82-08, SUZUKI RM-Z450 05-12, SUZUKI RM-Z250 07-12
It was beautiful Red.
I like the color and I like it. O-ring comes with two LargeSmalls but I only made it one side. Probably Large It will be durable. It is a drawback that the Oil gauge disappears, but I think that it is necessary to drill a hole for something - View detail
Fits: HONDA CB1300 SF, HONDA CB1300 SB, HONDA X4
Two Lengths were long!
We installed it in the 2015 year but only two places of Water Pump did not fit as long as 5 mm so we installed it by Cut.
The place where the Radiator solution comes out one place was not able to be installed because the Bolt tip was the one who took Taper.
I think that it is a good thing because it was customized on your own!
View detail
Fits: YAMAHA VIRAGO250
Engine Cover Bolt Kit Red
Since there was a point, purchase at Yahoo! Shopping 's Wa Big 2 shop.
For VIRAGO 250 set of 20 pcs. , The attached heat-resistant Grease is just right in feeling too much.
I think that it can be easily exchanged to anyone by changing the length by 1 pc each and exchanging.
Although it is a world of self-satisfaction to the last, it looks very good after replacement.
I think that Grease and Wrench are also attached to it is kindness and kind.
Gold It is never cheap so it was good that Bolt of Oil element cover was also included.
I chose Red this time but it was a product that was satisfactory also in terms of product without color unevenness and color fading.
View detail
Fits: SUZUKI DJEBEL 250 XC, SUZUKI DR250 R
Over my head
It was attached to DR 250 R following XR 230.
Well I have sold XR 230 but it is not on hand.
It's a pretty good price item though.
Because I am 1-Polished, I will be happy with Ugh.
2-weight saving
3- Following injury restoration by falling.
Yup.
3 is a rare case and 1 which made it 2 was Large half.
I understand, your feelings!
Touring Meet the other side But I'm feeling the way the American picks up Aluminum called Aluminum to enrich it Polishing I'm off car also Fork and Swingarm will be polished if Aluminum is polished, right?. But as soon as it gets muddy, it gets scarred all over.
The surroundings say. That's an off car. That's all it's supposed to take off. But I want to decorate my own machine even if it is off! Do not polish Aluminum and have anododized Aluminum parts!
That's a translation..
"I tried to reduce weight"
It is a translation to return to One Pattern with things that are also used to around.
"Keep on dieting"
View detail