Reviews
For a little dress-up
We had originally chosen Gold, but decided on Black for its affinity with ImeChain and Screen.
The rigidity as Bolt is fine and the color is beautiful.
I installed it on a ZrX1200DAEG, but be careful not to make a mistake because the two in the middle are just a little bit longer.
View detail
Fits: KAWASAKI ZZR1400 06-08, KAWASAKI ZZR1400 ABS 06-08, KAWASAKI 1400 GTR 08, KAWASAKI ER6 n 06-08, KAWASAKI ER6 f 06-08, KAWASAKI VERSYS 07-08, KAWASAKI Z750 07-08, KAWASAKI Z1000 07-08, KAWASAKI ZRX1200 DAEG, KAWASAKI ZX-10 R 06-10, KAWASAKI ZRX1200, KAWASAKI ZX-6 R 07-08, KAWASAKI ZX9 R 00-03, KAWASAKI ZZR1200
Gold looks good!
This time, I could not buy it at WeBig because they were out of stock.
I found it in stock at Naps and bought it, so I will only give an imprementation.
(It was cheaper to buy from WeBig.)
Anodized is beautiful and I liked that it was the same color as the other custom parts.
I think it is the same shade as Posh and Babyface Gold.
The installation took less than 5 minutes as I only had to replace the original Bolt.
It's good because it's easy to dress-up, but I wish the price was a little lower.
View detail
One point, but it is moderately conspicuous.
The visual effect is very good, except for the high price. View detail
Fits: HONDA CB1000R, HONDA CB1300S, HONDA CBR650F, HONDA CRF1000, HONDA CRF1100, HONDA CRF250RLAC, HONDA GROM125G, HONDA CBR250RR, HONDA CB400SF, HONDA CBR650R
Dress-up.
These are completely self-satisfied dress-up parts.
I'm happy with it myself, but it's expensive!
View detail
Fits: HONDA CBR900RR, HONDA CBR600F4, HONDA CBR1100XX, HONDA CB1300SF, HONDA CB400SB, HONDA CB400SF, HONDA CB1300SB, HONDA CB1300ST, HONDA VTR1000 SP-1, HONDA VTR1000 SP-2, HONDA CBR600RR, HONDA CBR1000RR, HONDA CBR929RR, HONDA CBR954RR
attractive red
The bike is CB400 red, so I think it will go well with the Bolt color steel. I like it so much.
Delivery was a little slower than expected due to customs clearance issues, but I am very happy to have purchased a chain of good quality.
It hasn't been installed yet, but it looks really pretty when installed on the fuel tank along with the 25th anniversary sticker I ordered.
-------------------------------------------------- -------- The bike is cb400 red, so it seems to go well with the bolt color. I like it so much. The delivery was a bit slower than I thought due to customs clearance, but I am very happy to buy a good quality chain. It's still before mounting, but it's too pretty to be mounted on the fuel tank with the 25th anniversary sticker ordered together. Powered by Google Translator
View detail
Fits: KAWASAKI ZZR1400 ABS 06-08, KAWASAKI ZZR1400 06-08, KAWASAKI ZZR1200, KAWASAKI ZX9 R 00-03, KAWASAKI ZX-6 R 07-08, KAWASAKI ZX-10 R 06-10, KAWASAKI ZRX1200, KAWASAKI ZRX1200 DAEG, KAWASAKI Z750 07-08, KAWASAKI Z1000 07-08, KAWASAKI VERSYS 07-08, KAWASAKI ER6 n 06-08, KAWASAKI ER6 f 06-08, KAWASAKI 1400 GTR 08
Save money compared to buying at Rose!
Bolt set for KAWASAKI 5-HoleTank cap.
I was thinking about whether to go with Black or Silver, and then I found this color.
In terms of color, the Magnesium color used for the engine cover of the ninjaZX-R has a shiny finish, giving it a familiar feel.
If you are a serious person, you may compare the model in the fitment with the Parts List for the Z900RS and think that the dimensions are different.
But Large sturdy. To begin with, there are only three left alive, and the remainingQuantity:Because 2pc is Dummy.
Replacement itself is easy, but be careful not to allow accumulated sand and dust to get into the tank or screw holes.
In order to avoid corrosion and galling due to potential difference and other unnecessary troubles, it is recommended to use a compound compound that can be applied to the surface of the substrate.
Since you will be using 5 bottles, it is Wallet-friendly to have the necessary Size 5 Pack.
I have not read anywhere about this Bolt, but it seems to be a very Duralumin.
If not, why don't you write Material?
View detail
Fits: HONDA GROM125G, HONDA CBR650R, HONDA CBR650F, HONDA CRF250RLAC, HONDA CRF1100, HONDA CRF1000, HONDA CB1000R, HONDA CB1300S, HONDA CBR250RR, HONDA CB400SF
Expensive, but very beautiful coloring and recommendation to Dress-up!
[How is it used?
Since the 14LiterTank of the unbranded CB1100 was replaced with an EXSecond Type Model 16LiterTank, the Bolt was also replaced!
Was the one you received as per Image?
As mentioned in other impressions, the color is similar to Orange, even though it is Gold.
The color is more beautiful than the Image.:Being aluminum, it is very light.
Was the installation difficult?
Since it is a bolt replacement, it can be easily done with a Hexagonal Wrench.
How was your experience with it?
It is satisfying because it is a place that I usually see often.
Especially when refueling, I get a smirk on my face.
[Included Parts:were they on?
There is no other way but Bolt.
[Was there anything that disappointed you?
Nothing in particular. However, I think 2,420 yen for 5 Bolts is expensive.
If too much torque is applied, the bolt will break, so it must be tightened at the specified torque. If only one bolt breaks, the quantity:I am concerned because it will be a Set purchase.
View detail
I wanted something thin.
I purchased these for the Rear Fender and to absorb vibration of the car body.
I put it on an area where there would be a lot of vibration, and it feels better to have it than not to have it.
I like that it's not too thick and not too wild.
View detail
Real Carbon's pattern is beautiful.
I used this when installing TSR's Radiator guard on my CB1300SF.
Since we chose black color Radiator guard, the OEM screws (silver) looked floating, so we combined black dyed Button bolt and CarbonWasher. The black-dyed button bolt has a small diameter, so we tightened it with the CarbonWasher.
I am satisfied with the high quality of Carbon.
View detail
Fits: HONDA GROM125G, HONDA CBR650R, HONDA CBR650F, HONDA CRF250RLAC, HONDA CRF1100, HONDA CRF1000, HONDA CB1000R, HONDA CB1300S, HONDA CBR250RR, HONDA CB400SF
Tank cap bolt
It was hard to find one for Honda5-Hole and I had given up on it, but I finally found one.
It is a world of self-satisfaction, but it is satisfying.
View detail
Fits: SUZUKI GSX1300R HAYABUSA
It looked great!
Used on current GSX1300R HAYABUSA.
The sparkle of Crystal and the color of Red were great.
I'm very happy with it
View detail
Beware of tightening Torque
The texture is perfect. Please note that this product is limited to 40N while pure STD Nut is 50N. 50N Torque value was applied and there were no cracks or chips. View detail
I almost don't see it and can't see it, but I want to stick to it.
The DURA-BOLT Shoulder Bag is an itchy lineup that has always been a great help to us.
As you can see in the picture, the License Plate mounting area on the back of the Fender is exposed to mud and water directly from the road surface, so it is easy to get dirty and''rust easily''!
This rust is quite a problem child, spreading and breeding rust in various places.
For a low-year model, this is quite a nuisance and can be fatal, so aluminum, which is resistant to rust, is the best material to use.
The Lock nut of the DURA-BOLT Shoulder Bag is also used for the nut.
View detail
On the front cover of LIVE DIO ZX
[How is it used?
LIVE DIO ZX'02
As Front coverBolt
OEMBolt
M6×10
DURABOLT
M6×16
Size+6mm
I wish DURABOLT Shoulder Bag would release a smaller size, like Button boltM6×12.
Was the one you received as per Image?
As expected as I have purchased several times.
But for the first time, I used it for ScooterFront cover as the name of the product suggests.
M6×16But if you use more than three Button bolts, this is actually Quantity:Set is a great value.
Black color is also a nice deep black color.
Was the installation difficult?
The product has no problem because of the body of the car, but since it had been neglected for many years, it was impossible to remove one Screw due to rust.
How was your experience with it?
Aluminum, so expect rust resistance.
Another reason why we chose the Hexagonal Wrench is that we expect it to improve maintainability.
The OEM Plus screw was tricky.
View detail
They don't sell them around there.
Stainless Steel and Black! Cap Nut is common, but I could only find one with a Flange at Webig.
The quality is good! It's expensive because it's Stainless Steel, but that makes sense because it won't rust or fade!
View detail
It's always in plain sight.
Good price, good quality, and good cost performance
Good variety of colors.
View detail
AGUSTA
I use Blue and Red differently, so that helps. View detail
AGUSTA
Match the color of Adjuster. View detail
Fits: Others
I am satisfied
I thought it might be a little brighter, but it's not bad. View detail
Fits: KAWASAKI ZX-6 R, KAWASAKI ZX-10 R, KAWASAKI VERSYS 650, KAWASAKI Ninja 400 ABS, KAWASAKI Ninja 400, KAWASAKI NINJA 1000, KAWASAKI ZZR1400 GTR, KAWASAKI ZZR1400, KAWASAKI ZX-9 R, KAWASAKI ZRX1200 S, KAWASAKI ZRX1200 R, KAWASAKI ZRX1200 DAEG, KAWASAKI Z800, KAWASAKI Z750 ABS, KAWASAKI Z750, KAWASAKI Z1000 ABS 07-09, KAWASAKI Z1000 07-09, KAWASAKI VERSYS 1000, KAWASAKI Ninja 650 R, KAWASAKI Ninja 400 R ABS
good-looking
It's a beautiful Bolt, so it's a bit of a look custom.
Just installing it makes it Gorgeous, and I like using it, even though it doesn't change the functionality at all.
View detail