Reviews
Circlip for CHOINORI front sprocket
[How is it used?
It will be a circlip to fix the front sprocket of SUZUKI/CHOINORI.
Was the one you received as per Image?
It was just as Image.
Circlip replaced an existing item that was not known when it was replaced due to wear and tear.
How was your experience with it?
Since it is not performance-related, there is no particular change before or after the replacement.
However, it is effective in that it eliminates the risk of cracking.
[Points to note]
There are no areas that require special attention.
How did it compare to other products?
There is no Other Brand Productetc., so this one, OEM Product, is required.
View detail
Fits: SUZUKI Gixxer, SUZUKI Zixer(150)
Air filter installation is quite large
As an air filter, it is a very ordinary 3, but 5 is because it is affordable and very ordinary.
The replacement procedure for the pre-2020 model can be found by Googling, but the replacement procedure for the post-2020 Gixxer 150 cannot be found by Googling, so I will describe it here.
(1) Remove the in-hemp palm clamps from the harness and rubber sheet to facilitate work.
The top two are easy, and the Right Side is by turning over the Rubber sheet. The problem is the yellow color of the lower side.
?Insert and remove the Driver's shaft from the depression where it enters the Tail cover; the Screw will fall completely out and down. It is wise to pinch it with the Tweezers before it is about to come off. the ground without getting caught in the Cover or anything else when it falls out.
When the screws on the front side cannot be accessed by shifting the harness, the screws on the side cover can be removed by removing the screws, pulling them slightly toward the front, and making space for the driver to be inserted.
(5) Remove and replace the collapsed packing on the lid side and the box side as it looks like a drill, and place the air filter in the box.:Set feeling and not hooked, so I put it down.
(6) Attach the two screws with yellow color circle on the bottom of the lid side, and carefully insert the lid from the front to prevent the screws from falling off. If you have a super strong magnet driver, you may be able to put it on afterwards and insert it through the narrow gap, but it seems to be very difficult.
(7) Pattern and Quantity:Since it is not a mechanism that can be set, the screw holes must be aligned and the lid and box must be set so that the front and rear quantities are well aligned.:Pair (for Left and Right) While moving the screws to the upper side, check the position of the Screw holes and temporarily fix the upper Screw. Before and after thisQuantity:Pair (for Left and Right) You might have a pretty good hunch that shaking it up to
(8) Align the screws on the lower side with the screw holes, and insert the screwdriver through the slit as you did when you removed the screw.
Tighten the screws on the side cover and put back the inHemp palmock to finish the work.
If you do this work often, you may get used to it and be able to do it in about 20 minutes, but if you fall into a screw or some other strange place and get stuck, it is Large strange to take it out. I think it took me about an hour to do Small because I had to be very careful.
Once I do it once, I might be able to make it a little smoother next time, but it's hard to do anyway.
It is a good Element to remove it rather often, but you may not want to do this step unless you are in a desperate situation.
View detail
No doubt, but be careful installing it.
Purchased for k6. As soon as I replaced it, the symptoms improved, but I made a mistake in the cord routing and it interfered with the GEAR and broke the wire. I had to buy another one because I couldn't fix it even after reconnecting the wires. Be careful about amateur maintenance! View detail
Genuine Suzuki Oil Pan Gasket for GSX-R1000
This bike had a service not so long ago but the mechanic failed to seat the oil pan gasket correctly and in turn, this started leaking along the left side. Obviously, this is not a good situation so a new oil pan gasket was needed in a hurry. Finding the right gasket was not hard for this GSX-R1000 as there are a lot of these bikes around and need OEM parts for servicing etc. I checked Suzuki schematics and found the right one no problem. Webike already had this is stock so I would not have to wait for them to get it. The price was really good and better than my local Suzuki dealership could match. With a couple of other gaskets for this bike, I had them all shipped toghether and by EMS as they just get the delivery to me fast. It took like 5 days from being shipped for this to arrive with me. The gaskets were all nocely kept flat so not to distort them. They all came in the standard Suzuki packaging too. This gasket covers a large area but there is a lot of cut outs for obvious reasons. Every single one aligned perfectly and without any problems. I made sure the oil pan was torqued correctly and seated as it should be. Now there are no leaks and this bike should be good until the next oil change or service. Thanks Webike, very pleased with this purchase. View detail
Fits: SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R600Z, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R750
Great product
Product original and match perfect in my motorcycle. The product was well package and arrived well.When I asked the support teams was ready to answer my questions and sent me the invoice fast. View detail
Fits: SUZUKI RM85L9, SUZUKI RM85L8, SUZUKI RM85, SUZUKI RM85, SUZUKI RM85, SUZUKI RM85L, SUZUKI RM85, SUZUKI RM85L, SUZUKI RM85, SUZUKI RM85, SUZUKI RM85, SUZUKI RM85, SUZUKI RM85L, SUZUKI RM85L, SUZUKI RM85L, SUZUKI RM85L, SUZUKI RM85, SUZUKI RM85, SUZUKI RM85, SUZUKI RM85
ถึง ทีมงานFฃWebike ด้วยจุดหมายปลายทางผู้รับของได้รับเรียบร้อยแล้ว..ตรงตามวันที่ได้ขอไว้ ขอบคุณในการบริการที่ดีมาก รู้สึกประทับใจอย่างมากในการให้บริการของทางร้าน ขอบคุณมาก View detail
Fits: SUZUKI DR250, SUZUKI RM125, SUZUKI RM125, SUZUKI DR250, SUZUKI RM125, SUZUKI DR250, SUZUKI RM125, SUZUKI RM125, SUZUKI TS125, SUZUKI RM125, SUZUKI TS125, SUZUKI RM125, SUZUKI TS125, SUZUKI TS125, SUZUKI DR-Z125, SUZUKI DR-Z125, SUZUKI DR-Z125, SUZUKI DR-Z125, SUZUKI DR-Z125, SUZUKI DR-Z125
ถึง ทีมงานWebike ด้วยจุดหมายปลายทางผู้รับของได้รับเรียบร้อยแล้ว..ตรงตามวันที่ได้ขอไว้ ขอบคุณในการบริการที่ดีมาก รู้สึกประทับใจอย่างมากในการให้บริการของทางร้าน ขอบคุณมาก View detail
Fits: SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250
ถึง ทีมงานWebike ด้วยจุดหมายปลายทางผู้รับของได้รับเรียบร้อยแล้ว..ตรงตามวันที่ได้ขอไว้ ขอบคุณในการบริการที่ดีมาก รู้สึกประทับใจอย่างมากในการให้บริการของทางร้าน ขอบคุณมาก View detail
Fits: SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250Z, SUZUKI RM250Z, SUZUKI RM250Z, SUZUKI RM250Z, SUZUKI RM250Z, SUZUKI RM250Z
ถึง ทีมงานWebike ด้วยจุดหมายปลายทางผู้รับของได้รับเรียบร้อยแล้ว..ตรงตามวันที่ได้ขอไว้ ขอบคุณในการบริการที่ดีมาก รู้สึกประทับใจอย่างมากในการให้บริการของทางร้าน ขอบคุณมาก View detail
Fits: SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250
ถึง ทีมงานWebike ด้วยจุดหมายปลายทางผู้รับของได้รับเรียบร้อยแล้ว..ตรงตามวันที่ได้ขอไว้ ขอบคุณในการบริการที่ดีมาก รู้สึกประทับใจอย่างมากในการให้บริการของทางร้าน ขอบคุณมาก View detail
Fits: SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250Z, SUZUKI RM250Z, SUZUKI RM250Z, SUZUKI RM250Z, SUZUKI RM250Z, SUZUKI RM250Z
ถึง ทีมงานWebike ด้วยจุดหมายปลายทางผู้รับของได้รับเรียบร้อยแล้ว..ตรงตามวันที่ได้ขอไว้ ขอบคุณในการบริการที่ดีมาก รู้สึกประทับใจอย่างมากในการให้บริการของทางร้าน ขอบคุณมาก View detail
Fits: SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250Z, SUZUKI RM250Z, SUZUKI RM250Z, SUZUKI RM250Z, SUZUKI RM250Z, SUZUKI RM250Z
ขอบคุณในการบริการที่ดีมาก รู้สึกประทับใจอย่างมากในการให้บริการของทางร้าน ขอบคุณมาก View detail
Fits: SUZUKI GSX-R1000AM0, SUZUKI GSX-R1000RAM0, SUZUKI GSX-R1000RZAM0, SUZUKI GSX-R1000AL8, SUZUKI GSX-R1000L8, SUZUKI GSX-R1000RZL8, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX-R1000R-Z
you need to change this part if you want keep the original variable valve
suzuki gsxr1000r's variable exhaust valve system is pretty good, but the cable is right next to the hot exhaust pipes. which means you need to change this cable after around 6~7years of use time the cable itself is good quality but installation is a bit hard for bad wrencher overall good purchase for money. thanks webike and drive safe from Korea. View detail
Fits: SUZUKI RM85L9, SUZUKI RM85L8, SUZUKI RM85, SUZUKI RM85, SUZUKI RM85, SUZUKI RM85L, SUZUKI RM85, SUZUKI RM85L, SUZUKI RM85, SUZUKI RM85, SUZUKI RM85, SUZUKI RM85, SUZUKI RM85L, SUZUKI RM85L, SUZUKI RM85L, SUZUKI RM85L, SUZUKI RM85, SUZUKI RM85, SUZUKI RM85, SUZUKI RM85
ดีครับสั่งบ่อยช้าบ้างเร็วบ้าง View detail
Fits: SUZUKI Intruder (VS1400GLP), SUZUKI Intruder (VS1400GLP), SUZUKI Intruder (VS1400GLP), SUZUKI Intruder (VS1400GLP), SUZUKI Intruder (VS1400GLP), SUZUKI Intruder (VS1400GLP), SUZUKI Intruder (VS1400GLP), SUZUKI Intruder (VS1400GLP), SUZUKI Intruder (VS1400GLP), SUZUKI Intruder (VS1400GLP), SUZUKI Intruder (VS1400GLP), SUZUKI Intruder (VS1400GLP), SUZUKI Intruder (VS1400GLP), SUZUKI Intruder (VS1400GLP), SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250, SUZUKI RM250
ดีครับสั่งบ่อย บริการดีราคาไม่แพงมาก ส่งไวทุกขั้นตอนสินค้าของแท้แน่นอนครับ View detail
ดีครับสั่งบ่อย บริการดีราคาไม่แพงมาก ส่งไวทุกขั้นตอนสินค้าของแท้แน่นอนครับ View detail
Fits: SUZUKI GSX-R125 ABS 100th Anniversary Collar
If you do it slowly and carefully, you can do it beautifully!
Cowl replacement done recently.
Not only do we have to replace the Cowl, but we also have to apply the Sticker and Decal attached to the Cowl.
Actually, I failed once. (Laughs)
I would like to write based on my failures.
This is ?Seal→○ Decal.
What is the difference between Seal and Decal?
Seal]
。 Sticker then becomes a more solid Seal.
Decal
Seat is used to reproduce difficult handwritten logos by transferring them onto a model. After the printing and processing processes, the seal is ready for transfer.
Decal is used for motorcycles and cars because of their weather resistance.
If you are confident with your hands, you may be able to paste it as it is, but it is quite risky (laughs).
I would like to introduce a method called water pasting.
How to paste
■What to prepare ■
Mist spray ........ "Water paste" This is done in a manner called 。
It is a wet cloth and can be substituted, but use a misting sprayer as it is by far the most efficient! 。 What you have at home is fine. If you don't have it, buy it.
OK with 100s of them.
○Towel...Large amount of water is produced in water pasting 。 TowelQuantity:1 pc. may not be enough. If you are not sure, buy it! 。 This is also OK with 100 units.
Spatula ... used to remove air and water 。 Fingers can be substituted, but fingerprints will be lost. 。 A spatula will give you a clean finish and make the work faster. But if you try to remove air bubbles with a spatula, you may damage the decal that has been softened by water pasting.
How to paste
1) Degreasing. Remove oil from the surface to be applied with a neutral detergent, etc.
↓
(2) Spray water on both the exterior decal and the surface to be affixed.
↓
(3) Temporarily place and align Decal. (I'm not pushing it yet.)
↓
It is better to use a Towel or your finger to press down from the center to the outside to drain off the water. Worst case, you can reapply if there is still water on the surface (laugh).
↓
(5) Drying. Leave it to dry for 5 to 6 hours in summer, or until the next day in winter. 。 But in the meantime, please check the status of Decal from time to time! 。 Air bubbles may form during the process of moisture loss, or floating may occur if the glue is weak.
↓
(6) Gently peel off the protective Seat over the Decal.
The work itself is not difficult, but it should be done slowly and carefully, taking your time.
My failed Point.
Insufficient ? degreasing.
?I was worried about the air bubbles and overgrew it with the spatula.
→It's not easy, but if you want to get it done quickly, you'll make more mistakes, so take your time and do it right.
View detail
Fits: SUZUKI GSX-R125 ABS 100th Anniversary Collar
If it cracks, it is wise to replace it.
The other day I got carried away... and fell to my feet (laughs).
I tried to repair it, but gradually I started to hear a buzzing sound at high RPM, and I was worried that it would not be able to withstand the vibration, so I replaced it. 。
Left Side upper part.
This vehicle will be a Full Cowl vehicle.
What is Full Cowl?
It looks sporty and looks how fast it is, but what is Merit and Demerit?
[Merit]
◎High aerodynamic performance allows the car to efficiently catch the driving wind behind it when driving at high speeds or riding for long periods of time, reducing fatigue. 。
◎Styling-wise, Full CowlMachine has a Sporty Sporty Style and looks good. I→d prefer it, though (laughs).
◎Protect your body from precipitation and insects.
Since motorcycles are exposed to the rain, the Cowl reduces the area where the body gets wet somewhat. 。 It also protects me from flying insects and Garbage from the front.
◎Engine protection in the event of a fall.
If you fall down without cowl, you may injure the crankcase etc., and the cost of parts around the engine is quite expensive even if the engine is traumatized... This is the case with Racer and others.
[Demerit]
▲Sensitive to strong crosswinds.
Full Cowl is strong against wind from the front, but its weak point is crosswind 。 The cowl makes it more susceptible to crosswinds, which is not a problem for a sturdy vehicle like a tourer, but a light motorcycle is affected to a large extent.
Damage is Large 。 As long as you are riding a motorcycle, you can't avoid situations that are either large or small, such as minor wounds, collisions, and falls. 。 In that case, you will need to replace the damaged Cowl, and this repair cost quite a bit of money! 。 Repair costs vary depending on the type of Motorcycle, but are estimated to be several tens of thousands of yen.
Poor maintainability. Various parts are hidden in the cowl, so maintenance basically starts by removing the cowl. 。 Even changing the oil has to start with removing the cowl! 。 It is said to be Large sturdy once you get used to it, but it takes a long time to maintain because the Upper Cowl on the front of the Motorcycle needs to be attached and detached, as well as Mirror, Blinker, and other accessory parts.
→GSX-R125 does not require cowl removal for oil replacement.
The exchange can basically be done with Hexagonal Wrench and +Driver. 。 It's in my on-board tools (laughs).
Point:If only a part of the Left Side is to be replaced, all screws on the CowlLeft Side must be removed. 。
Since Cowl is connected One Side by One Side. 。
Be careful not to lose any of the many small parts such as bolts and screws.
good point
◎No more chattering sound in vibration.
◎ Parts cost is relatively low. → I was at a Motorcycle store before I bought this one. If you fall, Cowl is cheap, so you don't have to worry!" I've been told that...yes, that's true (laughs).
◎SEA BASS has a Parts List on its Home page, so you can order at the store if you take down the part numbers.
A bad point
?Cowl removal and attachment is troublesome.
Repair is only a stopgap measure, so I would like to recommend replacement if budget allows! 。
SEA BASS, a manufacturer, has a parts list on their homepage so that you don't have to purchase a separate parts list. I think they are conscientious.
The Image seems to be Hurdle high to take off and put on, but you will get used to it after a few times.
It feels good to replace it.
View detail
Fits: SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI B-KING
Genuine Suzuki Magneto Case for Hayabusa GSX1300R 2004
This bike had a few issues that needed sorting out. One of the main ones is the magneto cover had got a lot of sctratches on it from being in a small accident. Fiinding the right magneto case was easy by cross referencing Suzuki schematics which is available online. Might as well get a direct replacement from Webike/Suzuki instead of trying to repair this one. No bother, the casings are not that expensive but Webike did have this anyway. I had some other parts in my order and all were shipped using EMS and arrived with me in 5 days. This magneto casing was packaged in a Suzuki box and was well protected from any damage. The finish on it is really nice, a well prepared and painted in gloss black. This was the same as the original one that came on the bike so would look perfect. All the mount points were pristine and well machined. I also purchase dthe magneto gasket as there is really no point in buying the casing and not a nice new gasket to go with it. Besides, the old one was toast. SO, after bolting it all back together in under an hour, this was doen. The resuly is a gorgeous and shiny magneto casing along with new gasket. Pleased is an understatement. Thanks Webike View detail
Fits: SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R, SUZUKI Hayabusa GSX1300R
Genuine Suzuki Magneto Gasket for Hayabusa GSX1300R 2004
This was needed this Hayabusa GSX1300R 2004 I have of a customers. This is a magneto case cover gasket. Also I had to change the actual magneto case due to a small rock hitting it and damaging whihch looked nasty for this too so a new gasket was a good purchase. The part number was found using the methods I generally use, either the help pages that Webike supply or direct to the manufacturer websites etc. I found the price of these was really good and better than I could source locally here in the UK, just like the other gaskets. As this was part of a larger order with many other Yamaha parts, the shipping worked out to be briliiant. Everything was very well packed and arrived via EMS within a week of ordering. All the empty space was filled with air pockets and bubble wrap. Most of the parts were packed in the genuine OEM Suzuki packaging anyway. Webike even taped the outer box to ensure, nothing could fall out or escape during transit. The parts all arrived in perfect condition. The gasket was kept nice and flat and did not suffer any bends or mishapen in any way. This is an essential gasket so I had to take a little care in fitting it. Didn't take too long and everything was back together and ready for firing up. The gasket fits perfectly and along with the new magneto case, that is one more thing finished off. Very happy with the result. Thanks Webike for your hard work. It really is appreciated. View detail